Auto3D plugin for MediaPortal 1.2 - 1.12 (GUI & TV/Beamer) (5 Viewers)

Sebastiii · January 15, 2018

What you can try is to update to the madVR build (will be the same version as future 1.19 Final) and install the Auto3D from there too

Because we know that Auto3D works with it because used recently

[WiP] - madVR support in MP1
Thanks.

fischy667 · January 15, 2018

@Sebastiii Ok, thanks.

fischy667 · January 15, 2018

yartat said:
Please, check request

Code:

curl -X POST http://<TV_IP>:1925/1/input/key -v -d "{ \"key\": \"3dFormat\" }"

The 3D menu does not open and a "Bad Request" as answer.

Code:

Note: Unnecessary use of -X or --request, POST is already inferred.
*   Trying 192.168.1.17...
* TCP_NODELAY set
* Connected to 192.168.1.17 (192.168.1.17) port 1925 (#0)
> POST /1/input/key HTTP/1.1
> Host: 192.168.1.17:1925
> User-Agent: curl/7.53.1
> Accept: */*
> Content-Length: 21
> Content-Type: application/x-www-form-urlencoded
>
* upload completely sent off: 21 out of 21 bytes
< HTTP/1.1 400 Bad Request
< Content-Length: 76
< Access-Control-Allow-Origin: *
< Cache-Control: no-cache
< Content-type: text/html; charset=utf-8
< Date: Mon, 15 Jan 2018 14:28:46 GMT
<
<html><head><title>Bad Request</title></head><body>Bad Request</body></html>* Connection #0 to host 192.168.1.17 left intact

I found the jointSPACE API documentation and tested other keys and they are working. There is also a list with all keys, but the 3D key is not listed.
Unfortunately it looks like there is no 3D button in jointSPACE v1, but for my TV it is the only way to get to the 3D menu.

I found something in a discussion, maybe someone could add this RC-Command to the jointspace v1 configuration in Auto3D.
jointSPACE / Discussion / Open Discussion:Change 3D Mode via jointSPACE

On my jlibrc_types.h I have a define for 3D button rc6S0Display3D (value 186), but it works like the 3D button of the remote control.

fischy667 · January 15, 2018

Sebastiii said:
@fischy667
What you can try is to update to the madVR build (will be the same version as future 1.19 Final) and install the Auto3D from there too
Because we know that Auto3D works with it because used recently
[WiP] - madVR support in MP1
Thanks.

Same problem with jointSpace v1, but here DirectFB is also not working, the TV is not recognized and the TV shows no reaction to the commands

daWooky · January 16, 2018

are those screens old or do ya edit the models list or why u have only one device in it?

i see three in it and also no js1 3d button...but i do not know if there really was one

fischy667 · January 16, 2018

daWooky said:
are those screens old or do ya edit the models list or why u have only one device in it?
View attachment 195464 View attachment 195465 View attachment 195466
i see three in it and also no js1 3d button...but i do not know if there really was one

Yes, I edited the model list. Maybe it is true that there was no button for 3D. Last time I used the plugin was two years ago.
Maybe I used DirectFB in the past, but this is also not working.

daWooky · January 16, 2018

hmm, so first I would remove auto3d and everything related to it and try to reinstall the new plugin (i know, sounds easier than it is)
or have ya already tried it on a fresh mepo install?

fischy667 · January 21, 2018

I now made a fresh install of MP and Auto3D. Unfortunately DirectFB is not working. Thanks for your afforts.

joecrow · January 21, 2018

fischy667 said:
I now made a fresh install of MP and Auto3D. Unfortunately DirectFB is not working. Thanks for your afforts.

Same problem here (Philips TV), I had to use jointSpace v1 but the default config did not work for me and without a 3D button writing the command sequence becomes a lot longer and clunkier than it needs to be

. It does work though.

fischy667 · January 21, 2018

joecrow said:
Same problem here (Philips TV), I had to use jointSpace v1 but the default config did not work for me and without a 3D button writing the command sequence becomes a lot longer and clunkier than it needs to be. It does work though.

Can you please send me your sequence to 3D. I know only the one via 3D button. Thanks.

Auto3D plugin for MediaPortal 1.2 - 1.12 (GUI & TV/Beamer) (5 Viewers)

Sebastiii

Development Group

fischy667

Super User

fischy667

Super User

fischy667

Super User

daWooky

MP Donator

fischy667

Super User

daWooky

MP Donator

fischy667

Super User

joecrow

Test Group

fischy667

Super User

Users who are viewing this thread