Blackgold 6-1 no DVB-T signal (1 Viewer)

[Dodgy Bob]

MediaPortal Version: 1.0.2
MediaPortal Skin: StreamedMP
Windows Version: Vista x86 Ultimate SP2
CPU Type: AMD 4850e 2.5Ghz
HDD:
Memory: 4GB
Motherboard: Gigabyte MA78G-DS3H
Video Card: Onboard ATI HD 3200
Video Card Driver: Catalyst Suite 9.8
Sound Card: Onboard Realtek HD
Sound Card AC3:
Sound Card Driver: 6.0.6002.18005
1. TV Card: BlackGold 3540
1. TV Card Type: analog, DVB-T, DVB-S
1. TV Card Driver: 6.0.0.49
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: ffdshow rev. 2033
MPEG2 Audio Codec:
h.264 Video Codec: PowerDVD 8 Ultra
Satelite/CableTV Provider: None
HTPC Case:
Cooling: Stock
Power Supply:
Remote: Microsoft
TV: Samsung LE46A756
TV - HTPC Connection: HDMI

Hi all,

I recently upgraded the driver for my Blackgold 6-1 TV card 6.0.0.39 to 6.0.0.49.

After the upgrade I went into TV-Server config. and in the cards list I saw the usual and a load of "unknown" ones. I removed the unknown ones and started to scan on the normal ones. The two DVB-S ones scanned fine. The two DVB-T ones reported no signal for everything.

I've tried stopping/starting TV service, rebooting, removing the co-ax cable and replacing. Nothing made a difference. I've rolled back the driver but it's still the same.

Can anyone suggest anything?

Thanks.

Bob.

 

[Paranoid Delusion]

Find out if they only used a 2k modulation chip, and not a 2-8k one, thats why all the old settop boxes have now stopped working, this really should not be the problem considering the age of the blackgold products, but who knows.

Also there have been complaints about Moel-y-Parc transmitter giving problems, maybe there are some others, check yours here DTG :: Consumer :: Digital TV Reception Checker

 

[Dodgy Bob]

Thanks PD but all seems ok on that front.

I'd like to delete and then re-add the DVB-T entries but it won't let me. How do I go about doing that?

Bob.

 

[Dodgy Bob]

Tried various things to no avail so I did the following :

1. Connected aerial to a TV to test DVB-T signal. Detected all expected channels, viewed a few, all OK.

2. Uninstalled the card.

3. Uninstalled MediaPortal

4. Install new 6.0.0.49 drivers for card

5. Installed 1.1 beta of MediaPortal

6. Scanned DVB-T channels (Moel-y-Parc) - MP detected 0. None. Zero.

The TV tuner details of the card are :

Digital terrestrial (DVB-T) hybrid tuner specification
Standard Definition and High Definition compatible
Advanced RF screening technology
Worldwide support 6MHz, 7MHz, 8MHz channel bandwidth
2k and 8k COFDM supported
Signal modulation for QPSK, 16QAM, 64QAM
Frequency coverage 49MHz to 861MHz VHF and UHF support
Fully compliant with ETS300 744 and NorDig2
Support for hierarchical modes

An example of the scan details from one of the tuners is :

4tp- 818000 8:No signal

Does anyone else have one of these cards? Do you have problems?

Bob.

 

[Dodgy Bob]

Done some hunting and testing and discovered the new frequencies for Moel-Y-Parc. They are :

666000
698000
642000
714000
722000
690000

Confirmed by checking manual tuning on a TV.

However, when I scan I only discover channels on the first one. Is anyone else using Moel-Y-Parc?

 

[gubbyrichie]

Hi Dodgy Bob, I have a similar problem which boils down to not being able to load the BlackGold 3500 PCI Tv-Tuner Driver

I have a HP Pavilion Media Centre PC, currently running XP SP3 and updates. It came with HP interface, a software package through which there is access to various utilities that come with XP. MCE worked fine until C Drive crashed and I had to have new disc installed. I asked the installer to use the HP Recovery Discs I had made but they didn’t work. What he did instead was to load XP SP3 and updates. Since then MCE couldn’t find the TV-Tuner. I bought a cheap digital TV stick that I can get freeview on fine. I use an external antenna mounted in the loft from which I get good pictures on my digital tv with a feed via a splitter to either the TV tuner card or the stick. I decided to try a BlackGold 3500 PCI card because I wanted the convenience of the MCE software. However, when I tried to load the drivers only the analogue drivers would work. The driver install wizard wouldn’t recognise the digital driver for ?unknown device in Device Manager. I got back to the vendor support and BlackGold support. The latter suggested the on board code might be out of date so I exchanged the card but the same problem recurs. I think the problem might lie with the HP interface or the absence of it. The bios still has some HP software in it. I used to have a partition on D Drive called E drive, that was a recovery drive but was lost.

I think the problem is to do with the absence of the HP interface software. Has anyone come across this problem? Does anyone know how to solve it. I am reluctant to spend £33 on a set of HP recovery discs without any guarantee that will solve the problem.

 

[Paranoid Delusion]

Does the TV card show up under device manager with a ! mark next to it, really think this is more hardware related than any software problem.

Check with TVCards own software, because if it will not work with that, then it won't work with MCE or MP.

 

[Dodgy Bob]

My problem was purely to do with the tuning parameters. And I've sorted it now (I think). I've got all 6 freqs, only 5 scan successfully but I'm sure I've got all channels.

<?xml version="1.0" encoding="utf-8"?>
<ArrayOfDVBTTuning xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <DVBTTuning>
    <Frequency>666000</Frequency>
    <BandWidth>8</BandWidth>
    <Offset>0</Offset>
  </DVBTTuning>
  <DVBTTuning>
    <Frequency>698167</Frequency>
    <BandWidth>8</BandWidth>
    <Offset>167</Offset>
  </DVBTTuning>
  <DVBTTuning>
    <Frequency>642167</Frequency>
    <BandWidth>8</BandWidth>
    <Offset>167</Offset>
  </DVBTTuning>
  <DVBTTuning>
    <Frequency>713833</Frequency>
    <BandWidth>8</BandWidth>
    <Offset>-167</Offset>
  </DVBTTuning>
  <DVBTTuning>
    <Frequency>722167</Frequency>
    <BandWidth>8</BandWidth>
    <Offset>167</Offset>
  </DVBTTuning>
  <DVBTTuning>
    <Frequency>689833</Frequency>
    <BandWidth>8</BandWidth>
    <Offset>-167</Offset>
  </DVBTTuning>
</ArrayOfDVBTTuning>