When I go in to the recorded tv section, if I try to delete a piece of manual recorded TV, I get an error message to the effect that the recording cannot be deleted. tv server error log shows a message "unable to delete because the file is in use by another process".
This is on a fresh install of MP1.0.1, with the following relevant tweaks:
1. I have a single dual hybrid tuner (dvb-t/analog)
2. Applied forum fix for dual analog tuners prior to setup
3. Ran TV Server setup as adminstrator to avoid bug where you cannot save config after db test
4. Setup dual tuners into two groups per wiki
5. Using PowerCinema h.264 codec for HD DVB-T tv
Is this a permissions issue? Or is some other process really holding onto that recording? The file does appear to exist under c:\ProgramData.
TV-Server Version: 1.0.1 with dual analog tuner fix
MediaPortal Version: 1.0.1
MediaPortal Skin: Blue, no change to fresh install
Windows Version: Vista 32 SP1 plus all updates
CPU Type: AMD 4850e X2 2.5GHz
HDD: WD Green 750G
Memory: 2x1GB Corsair
Motherboard: Gigabyte GA-MA78GPM-UD2H
Video Card: ATI HD3200 onboard
Video Card Driver: Catalyst 9.4
Sound Card: ALC889a onboard
Sound Card AC3: ??
Sound Card Driver: latest realtek drivers from gigabyte
1. TV Card: Hauppage HVR 2200
1. TV Card Type: dual Hybrid DVB-T/analog
1. TV Card Driver: latest hauppage WHQL from Windows update
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPC MPEG2 (Gabest)
MPEG2 Audio Codec: MPC MPA
h.264 Video Codec: PCM h.264
Satelite/CableTV Provider: n/a
HTPC Case: Antec Veris Fusion 2
Cooling: case 2x 120mm
Power Supply: 430W case
Remote: Genius Remote 300 MCE
TV: Samsung 32 LCD
TV - HTPC Connection: HDMI
This is on a fresh install of MP1.0.1, with the following relevant tweaks:
1. I have a single dual hybrid tuner (dvb-t/analog)
2. Applied forum fix for dual analog tuners prior to setup
3. Ran TV Server setup as adminstrator to avoid bug where you cannot save config after db test
4. Setup dual tuners into two groups per wiki
5. Using PowerCinema h.264 codec for HD DVB-T tv
Is this a permissions issue? Or is some other process really holding onto that recording? The file does appear to exist under c:\ProgramData.
TV-Server Version: 1.0.1 with dual analog tuner fix
MediaPortal Version: 1.0.1
MediaPortal Skin: Blue, no change to fresh install
Windows Version: Vista 32 SP1 plus all updates
CPU Type: AMD 4850e X2 2.5GHz
HDD: WD Green 750G
Memory: 2x1GB Corsair
Motherboard: Gigabyte GA-MA78GPM-UD2H
Video Card: ATI HD3200 onboard
Video Card Driver: Catalyst 9.4
Sound Card: ALC889a onboard
Sound Card AC3: ??
Sound Card Driver: latest realtek drivers from gigabyte
1. TV Card: Hauppage HVR 2200
1. TV Card Type: dual Hybrid DVB-T/analog
1. TV Card Driver: latest hauppage WHQL from Windows update
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPC MPEG2 (Gabest)
MPEG2 Audio Codec: MPC MPA
h.264 Video Codec: PCM h.264
Satelite/CableTV Provider: n/a
HTPC Case: Antec Veris Fusion 2
Cooling: case 2x 120mm
Power Supply: 430W case
Remote: Genius Remote 300 MCE
TV: Samsung 32 LCD
TV - HTPC Connection: HDMI