Cinergy S2 support diseqc? (1 Viewer)
- Thread starter ohmega61
- Start date
Sweden
Users who are viewing this thread
Similar threads
The issue must be in the TBS 5520 driver.
There is an insane 1 hour long response delay of BDA call (IKsPropertySet) to set TonesState properties.
The same problem is in SignalCheck (dvb: LockInOnSignal ok). This is done by BDA call IBDA_SignalStatistics.get_SignalLocked.
The server is unable to terminate due to ongoing BDA signal...
The issue must be in the TBS 5520 driver.
There is an insane 1 hour long response delay of BDA call (IKsPropertySet) to set...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...
Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...
It should work, but the error is in something else, but it is not yet clear what.
It should work, but the error is in something else, but it is not yet clear what.
I have MP1 TV Server 1.30 installed on Windows Server 2012R2 (with some bits added for tuner support). MP Server versions have...
I solved it myself, by modifying the host IP-address in the server table of the database,
MariaDB [(none)]> use mptvdb;
Database changed
MariaDB [mptvdb]> SELECT * FROM Server;
+----------+----------+--------------+----------+
| idServer | isMaster | hostName | rtspPort |
+----------+----------+--------------+----------+
|...
I solved it myself, by modifying the host IP-address in the server table of the database,
MariaDB [(none)]> use mptvdb;
Database...
Hello everyone,
I'm going to need help from the community to resolve a TV server crash issue.
I encountered a problem with my...
There seems to be an issue how MP2 is displaying TV recordings depending on whether the media source is on a local hard drive or a network storage. When I move the location of the TV recordings to a NAS, thumbnails will be displayed properly, otherwise they will not appear.
Even more strange, when adding the local harddrive manually...
There seems to be an issue how MP2 is displaying TV recordings depending on whether the media source is on a local hard drive or a...
There seems to be an issue how MP2 is displaying TV recordings depending on whether the media source is on a local hard drive or a...