DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (9 Viewers)

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

yes, call:

"setuptv -c"

there you can set the schema name, simply give it another name so it creates a new schema

 

[rbo]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

So these steps I've made yet:

1. I'vre recreate the server db
2. installed the x.57 driver
3. restart pc
3. update sattelite list on both cards
4. update the channel list on both cards

Result is the same problems:
No LiveTV by activated CAM (also no channels were found when I'm update the channel list)

 

[mts]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi all,

I have a new DigitalDevices DuoFlex C Card.
With MP 1.2 Alpha I don't find any channels.

Can you tell me which version of MP is working with this card?

THX

 

[MJGraf]

Hi mts,

I just ordered this card 10 minutes ago in the online shop, so I can't tell you anything from my own experience. But from what I've read so far in this thread, the code in MP 1.2 alpha doesn't work correctly with the newest driver from DD's website.

You should try MP 1.1.2 with the patch from the first post, which is supposed to work with the newest DD drivers. At least this is what others have reported...

Please report back if it works for you.

Thanks, Michael

 

[mts]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi,
I have installed 1.1.2 with patch now. -> no luck
My driver-version is: 2.0.0.21
The channel-scan doesn't find any channels.

 

[MJGraf]

Well that doesn't make me feel too good about the order I just placed...
I gues we'll have to wait for morpheus_xx, but he'll for sure need some logs from you.

Thanks,
Michael

EDIT: Just saw that you're using WinXP on your server. Maybe i only works with the Win7 drivers? Any chance you can try the card on Win7?

 

[mts]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Actually I'm even not able to receive any channels in WMC, what irritates me a bit.
I will make some post anyway.

EDIT: Here is my Tv.log and the tuner.log from DD

 

[fkremser]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi

I just installed MP 1.1.2 with Morpheus latest TVServer patch. I'm using 2 DigitalDevices CineS2 cards with twi CAM interfaces and driver version 2.0.0.21.

Here my results:
- unscrambled cannels -> system is working perfect (!!!)
- descrambling VIAccess channels -> system is working perfect (!!!)
- descrambling channels using Unicam -> no success (using the Unicam in a "normal" HD-Receiver works without any problem)

I have attached the TVServer logs (trying to switch to a scrambled channel using Manual Control in TVServer Configuration).

Is this problem related to MP or to the CineS2 driver? It seems, that the Unicam needs more time before it starts descrambling.

Thank you
Frank

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

hi fkremser,

I did a quick google search about "unicam digitaldevices" and found this post:

Das Unicam kann kein MTD.
Damit überhaupt was geht braucht man den 2.0.0.21 Treiber und man darf nur einen Tuner dem CI zuweisen. (im ConfigTool der Karte)

Digital Devices Cine-S2+CI+Unicam - DVBViewer community forum

They say this should work, can you test this?

 

[jarroz]

He Morpheus,

The current setup I now have works almost perfect for only that some channels won't decrypt and when the TV-Server is idle for sometime I can not tune to any channels. Server is set to never sleep!
I also don't see the client connect in the tv-server configuration under manual.
Either a remote client or the client on the TV-Server won't connect until a restart.

When I look at the logs I sometimes see the message "TypevbS is disabled" (In tv.log) , Is this somethings specific for the DD cards or is there another thing?

My setup now:
Win7 x64
DD CineS2 + CAM driver version 2.0.0.21
MP 1.1.2 Single seat + Morpheus v3 patch for MP Tv-server 1.1.1

Regards,
Jarroz