TV-Server Version: 1.0.0.0
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Blue3 Wide
Windows Version: Windows XP SP3
CPU Type: Intel Core2 Duo 2.4GHz
HDD:
Memory: 2Gb
Motherboard: ASUS P5B Vista
Video Card: Geforce 8600GT
Video Card Driver:
Sound Card: Built-in
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge HVR4000
1. TV Card Type: DVB-S/S2
1. TV Card Driver:
2. TV Card: Hauppauge HVR4000
2. TV Card Type: DVB-S/S2
2. TV Card Driver:
3. TV Card: FireDTV
3. TV Card Type: DVB-S
3. TV Card Driver:
4. TV Card: Pinnacle RoyalTS Dual
4. TV Card Type: DVB-T
4. TV Card Driver:
MPEG2 Video Codec: Nvidia Purevideo
MPEG2 Audio Codec: Nvidia Purevideo
h.264 Video Codec: PowerDVD 8
Satelite/CableTV Provider: Thor 0.8W/Sirius 5.0E
HTPC Case: Zalman HT160
Cooling:
Power Supply:
Remote: MCE Remote
TV: Philips 32'' old type
TV - HTPC Connection: RGB Scart
DiSeq switching is saved in table TuningDetails if i understand correctly, which makes it difficult/impossible with my setup.
Card1: Diseq 4/1 AA - Thor, AB - Sirius
Card2: Diseq 2/1 SimpleA - Thor, Simple B - Sirius
Card3: No Diseq. Thor
What happens is that i scan all cards/transponders and they work fine, but only the last scanned DiSeq-setting is saved for each channel. So if i scan in the order above - i mess up the whole thing and only card3 can receive Thor and card1 and 2 receive Sirius.
Is it possible to change this somehow so DiSeq-settings is stored together with card-data or something like that..
/Blomman
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Blue3 Wide
Windows Version: Windows XP SP3
CPU Type: Intel Core2 Duo 2.4GHz
HDD:
Memory: 2Gb
Motherboard: ASUS P5B Vista
Video Card: Geforce 8600GT
Video Card Driver:
Sound Card: Built-in
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge HVR4000
1. TV Card Type: DVB-S/S2
1. TV Card Driver:
2. TV Card: Hauppauge HVR4000
2. TV Card Type: DVB-S/S2
2. TV Card Driver:
3. TV Card: FireDTV
3. TV Card Type: DVB-S
3. TV Card Driver:
4. TV Card: Pinnacle RoyalTS Dual
4. TV Card Type: DVB-T
4. TV Card Driver:
MPEG2 Video Codec: Nvidia Purevideo
MPEG2 Audio Codec: Nvidia Purevideo
h.264 Video Codec: PowerDVD 8
Satelite/CableTV Provider: Thor 0.8W/Sirius 5.0E
HTPC Case: Zalman HT160
Cooling:
Power Supply:
Remote: MCE Remote
TV: Philips 32'' old type
TV - HTPC Connection: RGB Scart
DiSeq switching is saved in table TuningDetails if i understand correctly, which makes it difficult/impossible with my setup.
Card1: Diseq 4/1 AA - Thor, AB - Sirius
Card2: Diseq 2/1 SimpleA - Thor, Simple B - Sirius
Card3: No Diseq. Thor
What happens is that i scan all cards/transponders and they work fine, but only the last scanned DiSeq-setting is saved for each channel. So if i scan in the order above - i mess up the whole thing and only card3 can receive Thor and card1 and 2 receive Sirius.
Is it possible to change this somehow so DiSeq-settings is stored together with card-data or something like that..
/Blomman