Diseqc support for Tevii Cards/USB (2 Viewers)

[cfforce]

@all who uses Tevii tuners; how fast is channel zapping from one LNB to another? using diseqc; it is working; but can take sometimes up to 10 sec!

 

[cfforce]

This i see in the log:

2010-01-20 21:58:12.209960 [6]: TeVii: SendDiseqc: TvLibrary.ScanParameters,DVBS:tv:CANALDIGITAAL Discovery Science Freq:11739000 ONID:3 TSID:3202 SID:6040 PMT:0x988 FTA:False LCN:1259 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearV InnerFecRate:Rate3_4 DisEqc:Level1AB band:Universal Pilot:NotSet RollOff:NotSet
2010-01-20 21:58:12.597656 [6]: TeVii: Send DiSEqC successful.
2010-01-20 21:58:12.699218 [6]: dvbubmiting tunerequest Channeliscovery Science subChannel:0
2010-01-20 21:58:12.701171 [6]: dvb:using existing subchannel:0
2010-01-20 21:58:12.703125 [6]: dvbubmit tunerequest size:1 new:0
2010-01-20 21:58:12.705078 [6]: subch:0 OnBeforeTune
2010-01-20 21:58:12.708984 [6]: dvbubmit tunerequest calling put_TuneRequest
2010-01-20 21:58:23.354492 [6]: dvbubmit tunerequest done calling put_TuneRequest
2010-01-20 21:58:23.356445 [6]: subch:0 OnAfterTune
2010-01-20 21:58:23.358398 [6]: dvb: LockedInOnSignal ok
2010-01-20 21:58:23.359375 [6]: subch:0 OnGraphStart

a delay of 11sec; if i use MyTevii Software it's a instant lock.

 

[jonm]

Huge delays here too.

 

[cfforce]

Currently i have two systems; one is working fast in MP; the other one not (11-16sec delay); In both cases the MyTevii Software is zapping fast.
Currently im trying to find out what the differance is.. im gonna post mediaportal logs aswell. I've attached some logs from a tevii debug driver.

 

[jonm]

I emailed Tevii about this - they reckon it's an issue with MP, not their hardware/drivers. (But then they would say that!) I will try and figure out where the delay is on my system but I'm at work at the moment.

 

[OnkelChris]

AW: Diseqc support for Tevii Cards/USB

I do have the S660, too. I use the latest driver 20091211 and can't use the S2 channels. Could someone point me to the 20091008 version?

I'm using MP 1.0.2 and would like to give it a try. I'm not able to switch to the new SVN till end of february. So I would like to give the older driver version a try

 

[cfforce]

Re: AW: Diseqc support for Tevii Cards/USB

I do have the S660, too. I use the latest driver 20091211 and can't use the S2 channels. Could someone point me to the 20091008 version?

I'm using MP 1.0.2 and would like to give it a try. I'm not able to switch to the new SVN till end of february. So I would like to give the older driver version a try

Here is the previous driver.

 

[OnkelChris]

AW: Diseqc support for Tevii Cards/USB



unbelievable, how fast this community is

 

[cfforce]

Now what i did:
I pulled out the USB cable; and putted it on another one; windows found new hardware; and i let MP rescanned the lot.

If i change to the USB #1 slot; it has a long delay.
If i change to the USB #2 slot; it's working perfectly; like mytevii does.

Happens on 2 systems so far. Im going to reinstall again; to reproduce.
Attached MP-TVServer logs; @ same system; but different USB ports.

I zapped from:
RTL7 - Astra1(Scram) >> Discovery Sc. - Astra3(Scram) >> BVN - Astra1 >> Nederland24 - Astra3

Like i said; in all situations, MeTevii works.

Hope this helps.

 

[jonm]

cfforce - that sounds most weird! Presumably both ports are USB2?