Diseqc support for Tevii Cards/USB (1 Viewer)

[cfforce]

I've tried the new library; and looks ok for now; but tested on 1 systems atm. W7 X64; pre-rc2 disaster's edition.
No more errors "...in use..."
Need to test it on another system aswell; who has delay problems with zapping between diseqc; but can only access that system later this day.

 

[camane007]

Hi there

I got an TeVii S660 also, but unfortunately i can't use it with my motorised-dish , and i can't get any channels from Thor 1,0 W in special the " DIGI package " , and i can't use the remote control ( i no have any ideia who that works ).

I use windows-vista, and HH-100 dish-motor

i tried : progDVB , MyTevii " , dvbViewer but i think that works best with smartDVB.


Is there anyone who has the same problem......?


Thanks in advance

camane007

 

[cfforce]

With new tvlibrary errors are gone; but still slow zapping between diseqc, Astra1 > Astra3. about 10sec.

2010-03-28 19:58:03.906250 [(11)]: card: CardTune 2 Discovery HD setuptv:2:-1
2010-03-28 19:58:03.906250 [(11)]: card: Tune 2 to Discovery HD
2010-03-28 19:58:03.906250 [(11)]: card: user: setuptv:2:0 tune DVBS:tv:CANALDIGITAAL Discovery HD Freq:11856000 ONID:3 TSID:3208 SID:7010 PMT:0x9CE FTA:False LCN:190 SymbolRate:27500 Modulation:Mod8Psk Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:Level1AB band:Universal Pilot:On RollOff:ThirtyFive
2010-03-28 19:58:03.921875 [(11)]: card: to different transponder
2010-03-28 19:58:03.921875 [(11)]: dvbs: TuneVBS:tv:CANALDIGITAAL Discovery HD Freq:11856000 ONID:3 TSID:3208 SID:7010 PMT:0x9CE FTA:False LCN:190 SymbolRate:27500 Modulation:Mod8Psk Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:Level1AB band:Universal Pilot:On RollOff:ThirtyFive
2010-03-28 19:58:03.921875 [(11)]: dvbs: TuneVBS:tv:CANALDIGITAAL Discovery HD Freq:11856000 ONID:3 TSID:3208 SID:7010 PMT:0x9CE FTA:False LCN:190 SymbolRate:27500 Modulation:Mod8Psk Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:Level1AB band:Universal Pilot:On RollOff:ThirtyFive
2010-03-28 19:58:03.921875 [(11)]: LNB low:9750 hi:10600 switch:11700
2010-03-28 19:58:03.921875 [(11)]: dvbs:channel modulation is set to Mod8Psk
2010-03-28 19:58:03.921875 [(11)]: dvbs:channel FECRate is set to Rate5_6
2010-03-28 19:58:03.921875 [(11)]: TeVii: SendDiseqc: TvLibrary.ScanParameters,DVBS:tv:CANALDIGITAAL Discovery HD Freq:11856000 ONID:3 TSID:3208 SID:7010 PMT:0x9CE FTA:False LCN:190 SymbolRate:27500 Modulation:Mod8Psk Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:Level1AB band:Universal Pilot:On RollOff:ThirtyFive
2010-03-28 19:58:04.234375 [(11)]: TeVii: Send DiSEqC successful.
2010-03-28 19:58:04.343750 [(11)]: dvbubmiting tunerequest Channeliscovery HD subChannel:0
2010-03-28 19:58:04.343750 [(11)]: dvb:using existing subchannel:0
2010-03-28 19:58:04.343750 [(11)]: dvbubmit tunerequest size:1 new:0
2010-03-28 19:58:04.343750 [(11)]: subch:0 OnBeforeTune
2010-03-28 19:58:04.343750 [(11)]: dvbubmit tunerequest calling put_TuneRequest
2010-03-28 19:58:15.062500 [(11)]: dvbubmit tunerequest done calling put_TuneRequest
2010-03-28 19:58:15.062500 [(11)]: subch:0 OnAfterTune
2010-03-28 19:58:15.062500 [(11)]: dvb: LockedInOnSignal ok

 

[camane007]

Hi everybody

as a newbie i would ask if someone can help me to how to use the MP with my TeVii S660,
i use a dvb soft smartDVB , windows vista , diseq-motor , and i did put the ( TvLibrary.HardwarePlugin.TeVii.dll )
inside MP-plugin-folder as the ( morpheus_xx ) said .

Thanks in advance
camane007

Sorry for my bad Inglish.

 

[morpheus_xx]

AW: Re: Diseqc support for Tevii Cards/USB

... and i did put the ( TvLibrary.HardwarePlugin.TeVii.dll )
inside MP-plugin-folder as the ( morpheus_xx ) said

Hmm, where did you find this? Please don't use this special dll, it's not supported by the current available builds.

It was only a testing dll that required a special patched tvserver, which is long outdated, and the TeVii code is already part of official releases like 1.1 RC1

 

[camane007]

Thanks morpheus_xx

For your info, i just tried, but i still waiting if someone can be kind enough to configure my Tevii Cards/USB with MP.

Thanks in advance
camane007

 

[bluebear]

Hi!

Are these issues with tevii and diseqc resolved in rc2?

I have RC2 on a second machine with tevii s464 and have this error in tv-server log.

dvb: Failed to add bda receiver: TeVii DVB-S/S2 Receiver. Is it in use?

I see that both jaobr and jonm have previously in this thread noticed this issue.

At the moment I cant switch LNB with my tevii s464(pci) CARD. Anyone else with rc2 or rc1 have the same issue?
Or is it working for you as it should?

 

[jonm]

Not tried RC2 yet but yes I am also seeing that, and very long channel change times, with RC1.

 

[bluebear]

So how long is long jonm? I usually have picture after 10-12 seconds, but mostly its 3-4 seconds.
I take it that you are not using disegc?

Good to know, its no use going back to rc1.

 

[jonm]

Sometimes it's well over a minute for me. I've not had time to experiment to get the exact circumstances that cause this, though. Am not using diseqc.