Diseqc support for Tevii Cards/USB (12 Viewers)

[morpheus_xx]

AW: Diseqc support for Tevii Cards/USB

changes where commited to svn 25622.

so it will be included in RC3

 

[tomtg]

AW: Diseqc support for Tevii Cards/USB

Great, my problem regarding 20 sec. switching time SD->HD channels is solved with this testbuild.
(2x Tevii S460, ASTRA 19.2E, no DiSEqC)

.

 

[cfforce]

thanx morpheus, seems that custom tuning works best at this time.

BTW: new driver is out for Tevii (had not have the time to test it) 20100421
http://www.tevii.com/Support.asp

 

[jonm]

Finally got around to installing RC2 and testing this, looks good so far. Thanks morpheus!

 

[kiwi_fella]

HI There,

Ok so loving the Tevii card i just bought from a local auction (Think E-Bay type seller). Its the Tevii S470 PCIe DVBS2 Card.

It picks up my DVB-S Satellites

Optus D-1 (Universal LNB) Diseqc Port 3
INtelsat 2 (C-Band LNB) Diseqc Port 1

It is fine in the scan and will happilly maintain whichever Satellite i scan last, e.g if i do INtelsat first and Optus last the channels show up for optus, but i cannot preview or watch them. I can still however watch the INtelsat ones. The exact opposite is the same if i reverse the process.

Does anyone have any suggestions? I'm running RC3 (as most people here had luck with it) and Windows XP.

I'm a little bit of a newbie, but learn fast.

Also i have a HVR3000 Hauppauge onboard as well, but its only running DVB-T and i have the DVB-S/Analog servers disabled in TV Server.

HELP!!

Ive attached the logs, which seem to be failing around the timeout issue? Any suggestions? Thanks.

TA
B.

 

[jorges]

Hi
I have a TeVii S464 pci card installed with drivers version 4.5.0.0 from 21st April 2010 on Windows 7 Ultimate 64bit.

I have done a full install of RC6.

I have a motorised sat system (Diseqc 1.2), and if I tick the Diseqc Motor Enabled box and choose the satellite at which the dish is pointed, I get readings on both signal strength and quality. I have saved the position as No. 1 and this shows correctly as the current position. If I then scan for channels, the scan is very quick with no channels found.

If I set up Satellite No. 1 on the scan tab with the same satellite details, the scan finds over 300 channels.

I would be grateful for any help if anyone has got this card working with a Diseqc motor

 

[jorges]

Anyone?

 

[josch.hh]

AW: Diseqc support for Tevii Cards/USB

changes where commited to svn 25622.

so it will be included in RC3

The Tevii error message is back with the latest driver from 30.08.2010.
Maybe because the device name and other things inside the device manager are totaly different now for my Tevii S470:

New name now: "DVB-HD S470 PCIE BDA DVB-S2"
The signature within the device driver properties is now from: "jactek multimedia co. ltd."

2010-09-03 01:08:05.590000 [(15)]: dvb:  Failed to add bda receiver: DVB-HD DVB-S/S2 Receiver. Is it in use?

 

[cfforce]

I haven't tried the new Tevii driver yet; i will do so this week;

Also tevii has a new card soon:
http://www.tevii.com/Products_S480_1.asp

 

[josch.hh]

AW: Diseqc support for Tevii Cards/USB

Mysterious...
They removed the driver from 30.08.2010 from their download area.
The old ones from 21.04.2010 are back and they also posted a link to new "beta" driver with the date 27.09.2010.

I have no idea why...

The drivers from 30.08.2010 worked well on my machine.


EDIT:
With the new beta drivers the "old" device names are back again.
Maybe they removed the driver from 30.08 cause they made a mistake...
Even the content of the driver zip file is very different... (compared between drivers from 30.08 and 27.09)