[Installation] DVB-S scanning not working with hauppauge s2 hd and symbolrate 30000 (1 Viewer)

[mylle]

MediaPortal Version: 1.1 beta with 23652
MediaPortal Skin: blue wide
Windows Version: windows vista sp2
CPU Type: amd 4850e
HDD: 1tb wd
Memory: 3gb
Motherboard: gigabyte 780g chipset
Video Card: ati 3200hd
Video Card Driver: catalyst 9.9
Sound Card: realtek
Sound Card AC3:
Sound Card Driver:
1. TV Card: hauppauge nova s2 hd
1. TV Card Type: dvb-s2
1. TV Card Driver: 2.124.27191.1
2. TV Card: hauppauge nova s2 hd
2. TV Card Type: dvb-s2
2. TV Card Driver: 2.124.27191.1
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: powerdvd 8
MPEG2 Audio Codec: powerdvd 8
h.264 Video Codec: powerdvd 8
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
Hello



I have a setup with 2 dvb-s cards. 1 x hauppauge s2 hd and 1 x tt s-3200.

I decided to try the alpha built and completely uninstalled 1.0.1 includning dropping the database. Now i am not able to get any HD channels with symbolrate 30000 on my hauppauge card It works fine on the tt-s3200.

During a scan it just says no signal when reaching thor 1degree west on 12015H 30000 on the hauppauge card. I have tried reverting back to 1.0.2 but that does not make a difference. I have also tried different drivers but with no success.

This used to work just fine!!!

2009-07-21 09:32:35.500000 [16]: Controller: StartTimeShifting Discovery HD 4860
2009-07-21 09:32:35.500000 [16]: Controller: find free card for channel Discovery HD
2009-07-21 09:32:35.500000 [16]: Controller: got 1 tuning details for Discovery HD
2009-07-21 09:32:35.500000 [16]: Controller: channel #1 DVBS:tv:Telenor Discovery HD Freq:12015000 ONID:70 TSID:41 SID:4102 PMT:0x101 FTA:False LCN:4860 SymbolRate:30000 Modulation:Mod8Vsb Polarisation:LinearH InnerFecRate:Rate3_4 DisEqc:Level1AA band:Universal Pilot:On RollOff:ThirtyFive
2009-07-21 09:32:35.500000 [16]: Controller: card:1 typevbIP cannot tune to channel
2009-07-21 09:32:35.500000 [16]: Controller: card:2 typevbC cannot tune to channel
2009-07-21 09:32:35.500000 [16]: Controller: card:3 typevbS is disabled
2009-07-21 09:32:35.500000 [16]: Controller: card:4 typevbS is available priority:3 #users:0 same transponder:False
2009-07-21 09:32:35.500000 [16]: Controller: card:5 type:Analog cannot tune to channel
2009-07-21 09:32:35.500000 [16]: Controller: card:6 type:RadioWebStream cannot tune to channel
2009-07-21 09:32:35.500000 [16]: Controller: found 1 available
2009-07-21 09:32:35.531250 [16]: card: CardTune 4 Discovery HD homeserver:4:-1
2009-07-21 09:32:35.531250 [16]: card: Tune 4 to Discovery HD
2009-07-21 09:32:35.531250 [16]: card: user: homeserver:4:-1 tune DVBS:tv:Telenor Discovery HD Freq:12015000 ONID:70 TSID:41 SID:4102 PMT:0x101 FTA:False LCN:4860 SymbolRate:30000 Modulation:Mod8Vsb Polarisation:LinearH InnerFecRate:Rate3_4 DisEqc:Level1AA band:Universal Pilot:On RollOff:ThirtyFive
2009-07-21 09:32:35.531250 [16]: dvbs: TuneVBS:tv:Telenor Discovery HD Freq:12015000 ONID:70 TSID:41 SID:4102 PMT:0x101 FTA:False LCN:4860 SymbolRate:30000 Modulation:Mod8Vsb Polarisation:LinearH InnerFecRate:Rate3_4 DisEqc:Level1AA band:Universal Pilot:On RollOff:ThirtyFive
2009-07-21 09:32:35.531250 [16]: dvb:GetNewSubChannel:0 #0
2009-07-21 09:32:35.546875 [16]: TvDvbChannel ctor new subchIndex:0
2009-07-21 09:32:35.546875 [16]: LNB low:9750 hi:10600 switch:11700
2009-07-21 09:32:35.546875 [16]: Hauppauge DVB-S2 modulation set to:Mod8Vsb
2009-07-21 09:32:35.546875 [16]: Hauppauge DVB-S2 Pilot set to:On
2009-07-21 09:32:35.546875 [16]: Hauppauge DVB-S2 RollOff set to:ThirtyFive
2009-07-21 09:32:35.546875 [16]: Hauppauge DVB-S2 fec set to:Rate3_4
2009-07-21 09:32:35.546875 [16]: Hauppauge: Set Pilot: On
2009-07-21 09:32:35.546875 [16]: Hauppauge: Set Roll-Off: ThirtyFive
2009-07-21 09:32:35.546875 [16]: Channel modulation is set to Mod8Vsb
2009-07-21 09:32:35.546875 [16]: Channel FECRate is set to Rate3_4
2009-07-21 09:32:35.546875 [16]: Hauppauge: SendDiseq: 0xE0 0x10 0x38 0xF3 0x4 0x0 0x3 0x0 0x1 0x3 0x1
2009-07-21 09:32:35.656250 [16]: dvbubmiting tunerequest Channeliscovery HD subChannel:0
2009-07-21 09:32:35.656250 [16]: dvb:using existing subchannel:0
2009-07-21 09:32:35.656250 [16]: dvbubmit tunerequest size:1 new:0
2009-07-21 09:32:35.656250 [16]: subch:0 OnBeforeTune
2009-07-21 09:32:35.656250 [16]: dvbubmit tunerequest calling put_TuneRequest
2009-07-21 09:32:37.562500 [16]: dvbubmit tunerequest done calling put_TuneRequest
2009-07-21 09:32:37.562500 [16]: subch:0 OnAfterTune
2009-07-21 09:32:37.562500 [16]: subch:0 OnGraphStart
2009-07-21 09:32:37.562500 [16]: subch:0 Graph already running - skip WaitForPMT
2009-07-21 09:32:37.562500 [16]: dvb: RunGraph
2009-07-21 09:32:43.531250 [16]: dvb: LockedInOnSignal waiting 20ms
2009-07-21 09:32:43.546875 [16]: dvb: LockedInOnSignal waiting 20ms
2009-07-21 09:32:43.578125 [16]: dvb: LockedInOnSignal waiting 20ms
2009-07-21 09:32:43.593750 [16]: dvb: LockedInOnSignal waiting 20ms
2009-07-21 09:32:43.625000 [16]: dvb: LockedInOnSignal waiting 20ms
2009-07-21 09:32:45.546875 [16]: dvb: LockedInOnSignal could not lock onto channel - no signal or bad signal
2009-07-21 09:32:45.546875 [16]: mdplug: FreeChannel Discovery HD
2009-07-21 09:32:45.546875 [16]: tvcard:FreeSubChannel: subchannels count 1 subch#0 keep graph=False
2009-07-21 09:32:45.546875 [16]: DVB subch:0 Decompose()
2009-07-21 09:32:45.562500 [16]: FreeSubChannel CA: freeing sub channel : 0
2009-07-21 09:32:45.562500 [16]: tvcard:FreeSubChannel : no subchannels present, stopping graph
2009-07-21 09:32:45.562500 [16]: dvbtopGraph called
2009-07-21 09:32:45.562500 [16]: tvcard:FreeAllSubChannels:
2009-07-21 09:32:45.562500 [16]: mdplug: FreeAllChannels
2009-07-21 09:32:45.562500 [16]: dvbtopGraph
2009-07-21 09:32:45.656250 [16]: card2:homeserver 4 -1

what could have happened?

regards

Jacob

 

[ronilse]

Hi,
Attach all logs to your post (& not in the post) & add system specifications to it, so we know what to compare too.

Regards
Roy

 

[mylle]

Ok, so i guess i figured it out.

The transponder information about how to scan must have changed at some point between mediaportal 1.0 and 1.1 alpha. Apparently it does not affect every dvb-s card as my technotrend s-3200 works fine.

What i had to do to get the hauppauge to scan the HD channels on Thor 1g west was to edit this file

C:\Documents and Settings\All Users\Application Data\Team MediaPortal\MediaPortal TV Server\TuningParameters\dvbs\0.8°W Thor 3,5 Intelsat 10-02.xml

i changed "pilot" to OFF instead of on and set "rolloff" to max instead of thirtyfive

<Transponder>
<CarrierFrequency>12015000</CarrierFrequency>
<Polarisation>LinearH</Polarisation>
<SymbolRate>30000</SymbolRate>
<Modulation>Mod8Psk</Modulation>
<InnerFecRate>Rate3_4</InnerFecRate>
<Pilot>Off</Pilot>
<Rolloff>Max</Rolloff>
</Transponder>


If i update the transponderlist it will of course overwrite theese settings again.

Hopefully this can be fixed in a future svn? i have no idea what those settings mean but apparently the hauppauge card needs those set otherwise for it to scan transponders with a symbolrate of 30000 whereas the tt-3200 does not care.

regards

Jacob

 

[mylle]

Actually it now seems to be a problem on all S2 transponders regardless of symbolrate. I can confirm that this problem also exists in 1.0.2

 

[bakerpr]

I can also confirm this issue is also present on my technotrend S2-3650 whilst my S2-3200 is fine.

 

[dbgurudk]

I can also confirm that there is no HD channels on 1 west using Hauppauge HVR-4000

I do not have any dvbs folder in the tuningparameters folder??

How can I provide a log with the scanning result?

 

[mylle]

You can finde the DVBS tunig folder here
C:\Documents and Settings\All Users\Application Data\Team MediaPortal\MediaPortal TV Server\TuningParameters

To get the HD channels to work on the hauppauge card you have to set the "pilot" setting to off on the S" transponder.

I dont know if the dev's are looking in this thread or what we have to do to get this permanently fixed?

mylle

 

[dbgurudk]

Hi Mylle,

My problem is that I do not have this DVBS folder in my tuningparameters folder

I'm on the SNV of 08-08-09 on 1.1.0.0 ALPHA

Maybe we should put a thread in the SVN section?

Maybe you can post you dvbs xml-file in the Pastebin

Thanks in advance.

 

[mylle]

That is weird. Are you sure you are looking in the right place?

It is not in the programfiles\tema mediaportal server.

What OS are you using? In vista i believe its somewhere in the c:\programdata folder

Maybe its hidden?

regards

mylle

 

[dbgurudk]

Hi Mylle,

It's vista and I can see all the tuningparameters xml-files.

Here is my log files after a scan.