Failed to create graph (1 Viewer)
- Thread starter AberDino
- Start date
New Zealand
Sorry for the late answer
sorry that i dident answer the feedback you gave on the subject above, but i have had a lot of problems on my system, regarding TVguide and tweaking the portal to run smoothly, so i have been offline for a while.
But i'm still having the problem when trying to use the latest CVS.
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-21)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: Elecard Audio Decoder
Video Codec: Elecard MPEG-2 Video Decoder
CPU Type: AMD Athlon 64 3200+
Memory: 1 GB
Motherboard: 'K8N-E-Deluxe' (ASUSTeK Computer INC.)
TV Card Model: Haupauge PVR 150 MCE
TV Card Type: Hardware
TV Card Driver: Latest from Haupauge.com
Video Card Model: Nvidia Geforce FX 5200 (128 MB)
Video Card Driver: - The latest Nvidia
Video Card Resolution: 1024x768
Video Render Type: VMR9
Audio Card Model: Realtek AC'97 Audio
Audio Card Driver: -
Synopsis::
After i have installed the latest CVS, the setup prg. tell's me it's unable to create Graph, and thereafter it's unable to detekt my TV card. Setup prg. just freeses up when trying to detect the card.
Looks like i'm only able to run the CVS from 8/01-06 before the MCE cards fix ?
I hope that you can help me out here
sorry that i dident answer the feedback you gave on the subject above, but i have had a lot of problems on my system, regarding TVguide and tweaking the portal to run smoothly, so i have been offline for a while.
But i'm still having the problem when trying to use the latest CVS.
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-21)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: Elecard Audio Decoder
Video Codec: Elecard MPEG-2 Video Decoder
CPU Type: AMD Athlon 64 3200+
Memory: 1 GB
Motherboard: 'K8N-E-Deluxe' (ASUSTeK Computer INC.)
TV Card Model: Haupauge PVR 150 MCE
TV Card Type: Hardware
TV Card Driver: Latest from Haupauge.com
Video Card Model: Nvidia Geforce FX 5200 (128 MB)
Video Card Driver: - The latest Nvidia
Video Card Resolution: 1024x768
Video Render Type: VMR9
Audio Card Model: Realtek AC'97 Audio
Audio Card Driver: -
Synopsis::
After i have installed the latest CVS, the setup prg. tell's me it's unable to create Graph, and thereafter it's unable to detekt my TV card. Setup prg. just freeses up when trying to detect the card.
Looks like i'm only able to run the CVS from 8/01-06 before the MCE cards fix ?
I hope that you can help me out here
AberDino,
I have tested the Technotrend based Nova-T and it works just fine - no errors etc.
I believe we have the same drivers also.
Jowda,
The PVR-150 MCE works fine also.
Post your log into the pastebin also and let me know the link.
DMAN
I have tested the Technotrend based Nova-T and it works just fine - no errors etc.
I believe we have the same drivers also.
Jowda,
The PVR-150 MCE works fine also.
Post your log into the pastebin also and let me know the link.
DMAN
Here you go DMan
Here you go Dman, and thanx for helping out
http://mp.pastebin.com/517477
Regards Jowda
Bye the way this is from the latest CVS 22/01-06
Here you go Dman, and thanx for helping out
http://mp.pastebin.com/517477
Regards Jowda
Bye the way this is from the latest CVS 22/01-06
- Thread starter
- #16
Just to give you all a bit of feedback, in my case the problem happened when using 'MediaPortal Setup' to configure the card. When I use the setup wizard in the GUI, the card is picked up fine. Afterwards I used 'MediaPortal Setup' to edit the channel list etc.
Thanks to DMAN for the top tip and his assistance in resolving the matter. I believe the MP developers are aware of this problem and are working on a fix.
Thanks to DMAN for the top tip and his assistance in resolving the matter. I believe the MP developers are aware of this problem and are working on a fix.
AM i the only one with this prblm. ?
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-08 )
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: Elecard Audio Decoder
Video Codec: Elecard MPEG-2 Video Decoder
CPU Type: AMD Athlon 64 3200+
Memory: 1 GB
Motherboard: 'K8N-E-Deluxe' (ASUSTeK Computer INC.)
TV Card Model: Hauppauge PVR150MCE
TV Card Type: Hardware
TV Card Driver: 2.0.35.23301 MCE ver.
Video Card Model: Nvidia Geforce FX 5200 (128 MB)
Video Card Driver: 8.1.9.8 Nvidia's
Video Card Resolution: 1024x768
Video Render Type: VMR9
Audio Card Model: Realtek AC'97 Audio
Audio Card Driver: 5.10.0.5865
Synopsis:: -
Hi all tried out what Aberdino did, an sure enough my tvcard get's detected by the MP gui, and i no longer get the Failed to create graph error, but i still can't get the tvcard to work, MP just freese's up and the CPU rocket's to 99% usage an stay's there Windows comment MP is not answering.
The same is the fact about MP setup prg. When trying to setup the TVcard It's freese's up, and system rocket's to the 99% usage.
I've tried to set the PCI latency on the FX 5200 to 64 and the Haupauge to 0 , but no dice
Am i the only one with this prblm. ???????
With the config above there are no problem's, but that's not good enough for me, there's no fun if i'm not able to participate in the development's that are done/going on, on MP so if any of you could give me a good advice PLEACE HELP, anything about the config of my Mediacenter that could be the problem feel free to let me know.
Regard's Jowda
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-08 )
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: Elecard Audio Decoder
Video Codec: Elecard MPEG-2 Video Decoder
CPU Type: AMD Athlon 64 3200+
Memory: 1 GB
Motherboard: 'K8N-E-Deluxe' (ASUSTeK Computer INC.)
TV Card Model: Hauppauge PVR150MCE
TV Card Type: Hardware
TV Card Driver: 2.0.35.23301 MCE ver.
Video Card Model: Nvidia Geforce FX 5200 (128 MB)
Video Card Driver: 8.1.9.8 Nvidia's
Video Card Resolution: 1024x768
Video Render Type: VMR9
Audio Card Model: Realtek AC'97 Audio
Audio Card Driver: 5.10.0.5865
Synopsis:: -
Hi all tried out what Aberdino did, an sure enough my tvcard get's detected by the MP gui, and i no longer get the Failed to create graph error, but i still can't get the tvcard to work, MP just freese's up and the CPU rocket's to 99% usage an stay's there Windows comment MP is not answering.
The same is the fact about MP setup prg. When trying to setup the TVcard It's freese's up, and system rocket's to the 99% usage.
I've tried to set the PCI latency on the FX 5200 to 64 and the Haupauge to 0 , but no dice
Am i the only one with this prblm. ???????
With the config above there are no problem's, but that's not good enough for me, there's no fun if i'm not able to participate in the development's that are done/going on, on MP so if any of you could give me a good advice PLEACE HELP, anything about the config of my Mediacenter that could be the problem feel free to let me know.
Regard's Jowda
Re: AM i the only one with this prblm. ?
NO i have the sam problem also with th cvs from today 23-1-2006
MyTV Freezes when i'm entering but in config sometimes i can choose the card without messages, another time i get the cant get error, and sometimes when i click on the add button in the tv section it just closses the program.
Jowda said:Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-08 )
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: Elecard Audio Decoder
Video Codec: Elecard MPEG-2 Video Decoder
CPU Type: AMD Athlon 64 3200+
Memory: 1 GB
Motherboard: 'K8N-E-Deluxe' (ASUSTeK Computer INC.)
TV Card Model: Hauppauge PVR150MCE
TV Card Type: Hardware
TV Card Driver: 2.0.35.23301 MCE ver.
Video Card Model: Nvidia Geforce FX 5200 (128 MB)
Video Card Driver: 8.1.9.8 Nvidia's
Video Card Resolution: 1024x768
Video Render Type: VMR9
Audio Card Model: Realtek AC'97 Audio
Audio Card Driver: 5.10.0.5865
Synopsis:: -
Hi all tried out what Aberdino did, an sure enough my tvcard get's detected by the MP gui, and i no longer get the Failed to create graph error, but i still can't get the tvcard to work, MP just freese's up and the CPU rocket's to 99% usage an stay's there Windows comment MP is not answering.
The same is the fact about MP setup prg. When trying to setup the TVcard It's freese's up, and system rocket's to the 99% usage.
I've tried to set the PCI latency on the FX 5200 to 64 and the Haupauge to 0 , but no dice
Am i the only one with this prblm. ???????
With the config above there are no problem's, but that's not good enough for me, there's no fun if i'm not able to participate in the development's that are done/going on, on MP so if any of you could give me a good advice PLEACE HELP, anything about the config of my Mediacenter that could be the problem feel free to let me know.
Regard's Jowda
NO i have the sam problem also with th cvs from today 23-1-2006
MyTV Freezes when i'm entering but in config sometimes i can choose the card without messages, another time i get the cant get error, and sometimes when i click on the add button in the tv section it just closses the program.