Hauppauge-Fix (high-band does not work) (1 Viewer)

[saibot]

Yup, your right. just edited the registry from the original value 7 to 5, and worked a treat. found all the channels. Thanks guys..

 

[GregorV]

Hi saibot,

Alfred is right, the TVLibrary.DLLs were only build for that releases. Later SVNs already include the fix - also RC3 builds.

Gregor

 

[gibman]

Hi all!

I did seem to figure out that the 2 LNB's of the 4 available I have are indeed able to tune a few channels.
As long as they are NOT hi-band... if a channel is hi-band then I get no signal.

When debugging hauppauge.cs the 2 lnb nr's are 3 and 4.
Im willing to bet if I moved the LNBs around to pos 1 and 2, then the LNB1 would work with hiband also.

I see nothing in the hauppauge SDK about hi-band.

so hi-band works for lnb1 users but not for lnb2+ users.

/gibman

 

[nwagenaar]

So in short,

The highband problem still exists if you use a DISeQC configuration? Even when you use the Registry patch from this topic?

 

[dman_lfc]

Fixed

DMAN

 

[Cypsteel]

Hi all!

I did seem to figure out that the 2 LNB's of the 4 available I have are indeed able to tune a few channels.
As long as they are NOT hi-band... if a channel is hi-band then I get no signal.

When debugging hauppauge.cs the 2 lnb nr's are 3 and 4.
Im willing to bet if I moved the LNBs around to pos 1 and 2, then the LNB1 would work with hiband also.

I see nothing in the hauppauge SDK about hi-band.

so hi-band works for lnb1 users but not for lnb2+ users.

/gibman

I have your same problem. I was planning on posting a new thread full of complete logs and details today because I am not sure its related to this current thread. I will try the voltage adjustment tonight. If that doesn't fix my problem...I will proceed with a new thread. Here is a preview of my problem...details and logs to come.

• I have a DishPro 1000.4 with a triple head LNB and built in DISCEQ switch pointed at Dish 119, 110, 129.
• I have a NOVA-S-Plus PCI installed in a clean XP installation with latest Hauppauge drivers.
• DVB Dream and MyTheatre scans all LNBS and transponders successfully.
• I have did the calculation 25600-H=V to change all horizontal frequencies to verticals.
• MediaPortal scans LNB1 completely with no problems.
• MediaPortal only picks up 3 out of like 12 transponders on LNB2.
• The 3 transponders it does pick up...they are in fact on 110 as intended...so the actually switch is working to change the LNB path...but for some reason only a portion of the transponders are successfully scanned...

 

[dman_lfc]

try next SVN when release this weekend

DMAN

 

[Kealis]

Dman this *Hug* is for you!
I will report my findings when the SVN is released

 

[bvisser]

gah no svn release this weekend lol

 

[Cypsteel]

I have been rushing home every day after work...no SVN