MediaPortal Version: 0.2.3 RC2
Windows Version: Vista 32bit
CPU Type: Intel Core 2 1.8 GHz
HDD: 4x Hitachi 60 GB
Memory: 2 GB
Motherboard: ASUS P5WDH
Video Card: ATI X1950
Video Card Driver: 7.9
Sound Card: Onboard
1. TV Card: Hauppauge HVR-1110
1. TV Card Type: Analog/DVB-T
1. TV Card Driver: 4.0
MPEG2 Video Codec: MainConcept (Hauppauge) MPEG Video Encoder
MPEG2 Audio Codec: MainConcept (Hauppauge) MPEG Audio Encoder
Hi developers,
I have also the infamous Hauppauge HVR-1110 (Philips chipset) and got "no graph" errors on analogue part.
I have browsed all the related topics here, found no solutions except various "reinstall/retry" approaches.
Then I have started to poke around the "CapturCardDefinitions.xml" file.
With help of the "GraphEdit" tool referenced somewhere on this forum I have created a definition which does not produce "no graph" error anymore:
Now I am able to start the autoscan and/or enter channels manually via configuration.exe.
The issue is, that nor automatic scan, nor manually setup channel on valid frequence generates output, it shows blank black screen only, and in mediaportal.exe (fullscreen) it "reports no signal"
PS: The same frequency set up in graphedit.exe (graphs are connected the same way as in definition above) produces an ASF file with video and sound.
Please help with investigating further, so we (HVR-1110 owners) could use this great software !
PS: my error log shows only:
Is it possible that is is because Vista does not have WST Decoder and WST Codec is renamed to VBICodec ?
How can I disable the linking of teletext related DS filters ?
Windows Version: Vista 32bit
CPU Type: Intel Core 2 1.8 GHz
HDD: 4x Hitachi 60 GB
Memory: 2 GB
Motherboard: ASUS P5WDH
Video Card: ATI X1950
Video Card Driver: 7.9
Sound Card: Onboard
1. TV Card: Hauppauge HVR-1110
1. TV Card Type: Analog/DVB-T
1. TV Card Driver: 4.0
MPEG2 Video Codec: MainConcept (Hauppauge) MPEG Video Encoder
MPEG2 Audio Codec: MainConcept (Hauppauge) MPEG Audio Encoder
Hi developers,
I have also the infamous Hauppauge HVR-1110 (Philips chipset) and got "no graph" errors on analogue part.
I have browsed all the related topics here, found no solutions except various "reinstall/retry" approaches.
Then I have started to poke around the "CapturCardDefinitions.xml" file.
With help of the "GraphEdit" tool referenced somewhere on this forum I have created a definition which does not produce "no graph" error anymore:
Code:
<capturecard commercialname="Hauppauge HVR-1110 Analogue" capturename="Hauppauge WinTV-HVR 713X BDA Analog Capture" devid="ven_1131&dev_7133&subsys_67010070&rev_d1">
<capabilities tv="true" radio="true" mpeg2="true" mce="true" sw="false" bda="false"/>
<tv>
<interface cat="mux" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="Hauppauge WinTV-HVR 713X BDA Analog TV Tuner" checkdevice="true"/>
<filter cat="tvaudio" name="Hauppauge WinTV-HVR 713X BDA Analog TV Audio" checkdevice="true"/>
<filter cat="crossbar" name="Hauppauge WinTV-HVR 713X BDA Analog Xbar" checkdevice="true"/>
<filter cat="capture" name="Hauppauge WinTV-HVR 713X BDA Analog Capture" checkdevice="true"/>
<filter cat="videncoder" name="MainConcept (Hauppauge) MPEG Video Encoder" checkdevice="false"/>
<filter cat="audencoder" name="MainConcept (Hauppauge) MPEG Audio Encoder" checkdevice="false"/>
<filter cat="mux" name="MainConcept (Hauppauge) MPEG Multiplexer" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="2" sinkfilter="audencoder" sinkpin="0"/>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
<connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"/>
</connections>
</tv>
</capturecard>
Now I am able to start the autoscan and/or enter channels manually via configuration.exe.
The issue is, that nor automatic scan, nor manually setup channel on valid frequence generates output, it shows blank black screen only, and in mediaportal.exe (fullscreen) it "reports no signal"
PS: The same frequency set up in graphedit.exe (graphs are connected the same way as in definition above) produces an ASF file with video and sound.
Please help with investigating further, so we (HVR-1110 owners) could use this great software !
PS: my error log shows only:
Code:
[ERROR][5]: SinkGraphEx.SetupTeletext(): Failed to find WST Codec
Is it possible that is is because Vista does not have WST Decoder and WST Codec is renamed to VBICodec ?
How can I disable the linking of teletext related DS filters ?