Hauppauge Nova-S PLUS and Dvb-s2? (1 Viewer)
- Thread starter skogh
- Start date
Sweden
that entry in the wiki was wrong.
btw. only TV-Server will support dvb-s2.
the support for Nova-HD-S2 is not finished yet. dvb-s2 is not working atm.
btw. only TV-Server will support dvb-s2.
the support for Nova-HD-S2 is not finished yet. dvb-s2 is not working atm.
I don't know if it helps, but i read in another forum, that the hauppauge bda-driver for HVR-4000 and NOVA-HD-S2 needs two additional parameters for tuning. They're called "pilot symbols" (on/off) and "roll-off" (0,xx numeric value).
Without them it doesn't tune to hd-channels.
Maybe dman knows that already....
greets
stevie77
Without them it doesn't tune to hd-channels.
Maybe dman knows that already....
greets
stevie77
My Hauppauge WinTV HVR-4000 tunes to BBC HD Ok in TVe3. I think BBC use DVB-S at the moment rather than DVB-S2. It may be the DVB-S2 that needs additional parameters.
Mew
Mew
dvb-s2 uses different modulation(s).
support for dvb-s2 has to be added manualy to the TV-Server, because M$ has not included it (as many other things too
) in the BDA-specification......
dvb-s2 part of the NOVA-HD-S2 is not supported yet (i have one here too )
support for dvb-s2 has to be added manualy to the TV-Server, because M$ has not included it (as many other things too
) in the BDA-specification......dvb-s2 part of the NOVA-HD-S2 is not supported yet (i have one here too
)I only wanted to give dman a hint, which could make it possible for him to add support for ther nova-hd-s2 (and hvr-4000).
I've read that also the hauppauge driver uses other values for 8psk modulation that documented in their own guide.
I don't know if he know's that already, so just a hint!
I've read that also the hauppauge driver uses other values for 8psk modulation that documented in their own guide.
I don't know if he know's that already, so just a hint!
he is allready working on the support since quite some time.
he is also in contact with Hauppauge. The problem is that Hauppauge goes their own way in some techical aspects which are different to other manufaturers. furthermore, it seems that they have a slight issue in their drivers
Users who are viewing this thread
Similar threads
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format". Not sure what that means, but to test that, I downloaded a copy of Capture4Me, and indeed, it switches LNBs without any issues with minimal configuration (just set DiSEqC to 1.x A/B/C/D and select the...
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format"...
Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup...
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which I might do if the issue persists.
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For the first example, I highlighted the example text and eventually found the location in the menus where I could select the CODE macro to have the example text formatted as a code example. So far, so good...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...