Hauppauge WinTV CI-module. (3 Viewers)

darklord

Portal Pro
September 22, 2006
122
0
48
Home Country
Sweden Sweden
Hi, i have the same problem the ci dissapear and when i open configuration i got a copy of all cards. Then i change and it works for a short while and then all breaks again. Is there any other way to fix this? make any maual settings to the ci-settings for permanent use ? Or doe´s any one have a clue or solution?

I know many pepole in sweden who is ready to give WinTV-CI to the trashcan !

HELP :eek:
 

WsQ

Portal Pro
December 15, 2008
145
34
Kangasala
Home Country
Finland Finland
Updated to 1.2 Alpha and can't get any paytv channels to work anymore. Everything seems to be as before, but no matter what I try, tuning into paytv channel just gives "channel scrambled"... :(
 

sturby

Portal Member
November 27, 2010
7
0
Home Country
Italy Italy
Also I found out that if I first go to WinTV-CI config, then to some other part of TV-Server config and back to WinTV-CI config, all tuners are shown twice in the list. If I do this again they are shown three times and then four and five etc.
hi
i've the same problem
and then, often i must reset association

Any idea?
 

mm1352000

Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Hi sturby

    This is a bug that I have fixed for 1.2.0rc. I've also fixed the bug mentioned by WsQ. You won't be able to use 1.2.0a with the WinTV CI at all, but you could use 1.1.x or 1.2.0b with the patch provided -->here<--.

    Best regards,
    mm
     

    sturby

    Portal Member
    November 27, 2010
    7
    0
    Home Country
    Italy Italy
    uhm, great but after istall these patched file i've obtained a bsod on hwc11bda.sys!
     

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Hi again sturby

    ehm, with bsod it's very difficult!
    All that I was trying to do is understand when the BSOD happens. The last entry in the logs should tell me that, so all you needed to was trigger the BSOD, restart, and then use the watchdog with option 3 to grab all your logs.

    Here my logs.
    :D
    So, to produce the logs it looks like you tried to tune a handful of FTA channels (Italia1, LA7, Rai 4, Canale5 +1...). That seems to have been successful. After that, you tried to tune the Premium Comedy channel, which is encrypted. TV Server detected that channel was scrambled:

    2011-07-27 00:32:11.187920 [(5)]: card: StartTimeShifting 2 E:\Timeshift\live2-0.ts
    2011-07-27 00:32:11.188920 [(5)]: card: CAM enabled : True
    2011-07-27 00:32:11.189920 [(5)]: card: WaitForTimeShiftFile - waiting _eventAudio & _eventVideo
    2011-07-27 00:32:26.190778 [(5)]: card: WaitForTimeShiftFile - no audio was found after 15,000858 seconds
    2011-07-27 00:32:26.191778 [(5)]: card: WaitForTimeShiftFile - audio and video stream is scrambled

    The reason for that is that your WinTV CI is not assigned to a tuner:

    2011-07-26 00:35:20.777310 [TVService(6)]: dvbt:BuildGraph
    2011-07-26 00:35:21.276510 [TVService(6)]: dvb:AddNetworkProviderFilter
    2011-07-26 00:35:21.276510 [TVService(6)]: dvb:AddNetworkProviderFilter
    2011-07-26 00:35:21.276510 [TVService(6)]: dvb:Add Generic Network Provider
    2011-07-26 00:35:21.292110 [TVService(6)]: dvb: Add Mediaportal TsWriter filter
    2011-07-26 00:35:21.869311 [TVService(6)]: dvbt:CreateTuningSpace()
    2011-07-26 00:35:21.884911 [TVService(6)]: dvbt:found correct tuningspace MediaPortal DVBT TuningSpace
    2011-07-26 00:35:21.884911 [TVService(6)]: dvb:Add MPEG2 Demultiplexer filter
    2011-07-26 00:35:22.118912 [TVService(6)]: dvb:AddAndConnectBDABoardFilters
    2011-07-26 00:35:22.181312 [TVService(6)]: dvb: find bda tuner
    2011-07-26 00:35:23.242114 [TVService(6)]: dvb: using [Tuner]: Hauppauge WinTV 88x DVB-T Tuner/Demod
    2011-07-26 00:35:23.242114 [TVService(6)]: dvb: Render [Network provider]->[Tuner] OK
    2011-07-26 00:35:23.242114 [TVService(6)]: dvb: Setting lastFilter to Tuner filter
    2011-07-26 00:35:23.257714 [TVService(6)]: dvb: Find BDA receiver
    2011-07-26 00:35:23.257714 [TVService(6)]: dvb: match Capture by Tuner device path
    2011-07-26 00:35:23.273314 [TVService(6)]: dvb: -Hauppauge WinTV 88x TS Capture
    2011-07-26 00:35:23.273314 [TVService(6)]: dvb: Match by device path failed - trying alternative method
    2011-07-26 00:35:23.273314 [TVService(6)]: dvb: match Capture filter by Tuner device connection
    2011-07-26 00:35:23.273314 [TVService(6)]: dvb: -Hauppauge WinTV 88x TS Capture
    2011-07-26 00:35:23.273314 [TVService(6)]: dvb: Render [Tuner]->[Capture] AOK
    2011-07-26 00:35:23.273314 [TVService(6)]: dvb: Setting lastFilter to Capture device
    2011-07-26 00:35:23.320114 [TVService(6)]: dvb: WinTv CI module detected
    2011-07-26 00:35:23.335714 [TVService(6)]: dvb: WinTv CI module not assigned to card: Hauppauge WinTV 88x DVB-T Tuner/Demod

    So that behaviour should be able to be resolved simply by linking the WinTV CI to your Hauppauge tuner...

    I'm left a little uncertain here.
    When does the BSOD occur?
    Does it occur if you link the WinTV CI and then attempt to view a channel?
    What happens if you enable preloading for the Hauppauge tuner and also link the WinTV CI to it? (I'm wondering whether attempting to use the WinTV CI with the tuner, or attempting to descramble channels is actually causing the BSOD)
    Are you using the latest drivers for the WinTV CI and tuner?

    mm
     

    sturby

    Portal Member
    November 27, 2010
    7
    0
    Home Country
    Italy Italy
    Hi mm1352000!
    thanks for your interest.

    The driver of dvb t and ci module should be the last... I've posted a full mp logs after bsod.

    --Marco
     

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Hi again Marco

    Here is the error I see in the logs that is probably causing the crash (in the tuner initialisation):

    2011-07-27 23:57:16.543755 [(3)]: dvb: Adding WinTv CI to graph
    2011-07-27 23:57:16.637355 [(3)]: dvb: WinTv CI not plugged in or driver not installed correctly!

    Have you ever actually had the CI working with MP (in 1.1.3), or is this your first attempt to use it?
    I ask because I honestly can't see why the crash is occurring...

    mm
     

    Users who are viewing this thread

    Top Bottom