Hauppauge WinTV HVR1300 + pay-tv = true ? (1 Viewer)

Thread starter mirk
Start date June 2, 2006

mirk

Retired Team Member

Premium Supporter

June 2, 2006

Hallo
Can someone tell me if you can connect a CI-module or something to Hauppauge WinTV HVR1300 to make it possible to watch coded channels.

Users who are viewing this thread

Similar threads

MP1 MP2 1.36 Hauppauge WinTV-NOVA-S2 DiSEqC DE

Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format". Not sure what that means, but to test that, I downloaded a copy of Capture4Me, and indeed, it switches LNBs without any issues with minimal configuration (just set DiSEqC to 1.x A/B/C/D and select the...

Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format"...

Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup...

Replies: 18

Views: 3K

March 20, 2025

AberDino

MP1 MP2 Issue after replacing tuner DE

Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine. Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC? PS: You can also try to make short record

Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...

I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...

Replies: 4

Views: 2K

January 15, 2025

Pablik

MP1 MP2 Home server disconnected DE

I haven't tested it. I use MP1, but sometimes I try to help with MP2 :).

This happened immediately after my Windows 11 x64 monthly update for November. The update included also cumulative update to .NET...

Replies: 9

Views: 1K

October 17, 2025

larry_S

MP1 MP2 Picture-in-picture DE

Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many tries, and it’s not clear what I am doing that makes it work on those occasions when it does. Cannot find guidance on the site. Thanks, N. Again, if anyone knows how to do this, would be much...

Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...

Replies: 0

Views: 1K

July 23, 2025

Nordfinn

MP1 MP2 How to get MP2 to work with Hauppauge WinTV 1850 TV card DE

I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software controls the emitter, and transmits IR signals under the direction of MP. The IR signal is received by the IR receiver within the set-top box, and so can be used to change channel and so on. The set-top...

I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software...

My computer is running Windows 10 Pro. I have installed MP2. Not sure what version. I have a Hauppauge WinTV 1850 TV card...