Install AverMedia Card M 135 A (1 Viewer)
- Thread starter ottokar24
- Start date
Germany
Users who are viewing this thread
Similar threads
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...
Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...
The issue must be in the TBS 5520 driver.
There is an insane 1 hour long response delay of BDA call (IKsPropertySet) to set TonesState properties.
The same problem is in SignalCheck (dvb: LockInOnSignal ok). This is done by BDA call IBDA_SignalStatistics.get_SignalLocked.
The server is unable to terminate due to ongoing BDA signal...
The issue must be in the TBS 5520 driver.
There is an insane 1 hour long response delay of BDA call (IKsPropertySet) to set...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine.
Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC?
PS: You can also try to make short record
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...
I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...
Hi, yes, you are right. The official x64 1.32 is buggy.
You can try a new installers from this post if you like.
Hi, yes, you are right. The official x64 1.32 is buggy.
You can try a new installers from this post if you like.
hi,
I'm setting up a new computer and have installed MP 1.3.2 after a few goes and getting all the prereqs installed, I was...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a DVB-T2 tuner (a TBS 6284) :(, but succeeded when I used a DVB-T tuner (a Pinnacle 2000i) :). Obviously the Pinnacle found only those channels broadcast in DVB-T MUXes (in the UK we have both DVB-T MUXes and...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a...
Hi all
Running 1.7.1.0 TV Server as part of a full upgrade to MP2 2.5 setup
After some problems with retuning (solved -...
