IPTV not working (1 Viewer)

[terrom]

Help me please with IPTV streaming through Mediaportal!

I do everything but medaiportal couldn't find any programm with any MPIPTVSource.ax file!

VideoLan is working fine with my m3u file. It looks like:

#EXTM3U
#EXTINF:-1,Первый
udp://@233.166.172.65:1234
#EXTINF:-1,5 канал
udp://@233.166.172.71:1234
#EXTINF:-1,СТС
udp://@233.166.172.75:1234

What should I do?

 

[dimka]

terrom Please upload logs. If nothing in those files Stepko will supply a debug version which will generate a tons of logs

 

[terrom]

Here the log file:

https://forum.team-mediaportal.com/attachment.php?attachmentid=70892&stc=1&d=1288965797

 

[Stepko]

AW: Re: IPTV not working

Hi terrom,

your log file looks weird to me. The urls you mentioned in your first post are not in the log files. But there are a lot of other urls like udp://@232.0.1.1:10010. Can you please double check that the urls are correct and in your m3u file. Perhaps the TV-Server has problems with the special characters or with the "-1" in the extinf-section. You could try to modify your m3u for testing to something like
#EXTM3U
#EXTINF:1,Test1
udp://@233.166.172.65:1234
#EXTINF:1,Test2
udp://@233.166.172.71:1234
#EXTINF:1,Test3
udp://@233.166.172.75:1234

Another cause for your problems could be a firewall. There were some people with the same problem (stream works in vlc but not in MP). In all cases the firewall blocked the TV-Server. Please make sure that the TV-Server (tvservice.exe) is not blocked by any firewall. For testing you should disable your firewall completly. Please disable any installed firewall AND the Windows firewall.

If this doesn't help you could use the debug version of my filter. You will find it in one of my posts in this thread. But I'm not sure whether there are a lot of debug outputs in the udp part... you could give it a try.

Stepko

 

[j1nx]

Just to let you all know.

Installed the 1.2.0 Alpha yesterday. Had some IPTV glitches afterwards. Then remembered I was running on the latest Dimka version. Copied it back over the original 1.2.0 version. Works like a charm. No more glitches, more stable streams (UDP)

As we are again away from the freezing versions, why is this updated filter not yet in 1.2.0? Do we need to sign some partition or something? Let's get this version streamlined into the new MP build.

 

[Stepko]

AW: Re: IPTV not working

Installed the 1.2.0 Alpha yesterday. Had some IPTV glitches afterwards. Then remembered I was running on the latest Dimka version. Copied it back over the original 1.2.0 version. Works like a charm. No more glitches, more stable streams (UDP)

As we are again away from the freezing versions, why is this updated filter not yet in 1.2.0? Do we need to sign some partition or something? Let's get this version streamlined into the new MP build.

Good to hear that it works better than the original version for almost everyone. I think it is still not in 1.2.0 because the changes are quite big and the devs have not so much time to review the code.

To speed it up you could write your experience in the submission threat for the most recent version: https://forum.team-mediaportal.com/submit-code-patches-mediaportal-tv-server-etc-325/iptv-filter-support-rtp-http-84321/


Stepko

 

[j1nx]

Re: AW: Re: IPTV not working

Installed the 1.2.0 Alpha yesterday. Had some IPTV glitches afterwards. Then remembered I was running on the latest Dimka version. Copied it back over the original 1.2.0 version. Works like a charm. No more glitches, more stable streams (UDP)

As we are again away from the freezing versions, why is this updated filter not yet in 1.2.0? Do we need to sign some partition or something? Let's get this version streamlined into the new MP build.

Good to hear that it works better than the original version for almost everyone. I think it is still not in 1.2.0 because the changes are quite big and the devs have not so much time to review the code.

To speed it up you could write your experience in the submission threat for the most recent version: https://forum.team-mediaportal.com/submit-code-patches-mediaportal-tv-server-etc-325/iptv-filter-support-rtp-http-84321/


Stepko

No problem, just did. Let's hope for the best.

 

[terrom]

Sorry for my previous email.

I install MPIPTVSource_hEx_v1_debug. I disable Windows 7 X64 firewall.
Channel not scanned. Signal Level and Signal Quality at 0 position.

The log is very simple (nothing more):

2010-11-08 14:26:29.665200 [SetupTv(1)]: ---- SetupTv v1.1.1.0 is starting up on Windows 7 [6.1.7600.0]
2010-11-08 14:26:29.680800 [SetupTv(1)]: ---- check connection with database ----
2010-11-08 14:26:30.507600 [SetupTv(1)]: SetupDatabaseForm: Added dependency for TvService - MySQL
2010-11-08 14:26:30.507600 [SetupTv(1)]: ---- check if database needs to be updated/created ----
2010-11-08 14:26:30.538800 [SetupTv(1)]: ---- upgrade database schema ----
2010-11-08 14:26:30.538800 [SetupTv(1)]: ---- check if tvservice is running ----
2010-11-08 14:26:30.554400 [SetupTv(1)]: RemoteControl: RegisterChannel first called in Domain SetupTv.exe for thread SetupTv with id 1
2010-11-08 14:26:38.479200 [SetupTv(1)]: Util: Version of installed Psisdecd.dll: 6.6.7600.16485 Path: C:\Windows\SysWOW64\PsisDecd.dll
2010-11-08 14:26:38.479200 [SetupTv(1)]: Util: Version of installed Psisdecd.dll: 6.6.7600.16485 Path: C:\Windows\SysWOW64\psisdecd.dll
2010-11-08 14:26:40.585200 [(6)]: Controller: epg stop
2010-11-08 14:26:48.822000 [(6)]: Controller: epg stop
2010-11-08 14:26:58.306800 [(6)]: Controller: epg stop
2010-11-08 14:26:58.353600 [(6)]: Stopcard
2010-11-08 14:26:58.369200 [(6)]: dvbtopGraph called
2010-11-08 14:26:58.369200 [(6)]: tvcard:FreeAllSubChannels
2010-11-08 14:26:58.369200 [(6)]: Controller: epg start

VLC media player is working. What else could I do?

 

[Stepko]

AW: Re: IPTV not working

There should be a log file created by the debug version in the TV-Server log-directory. The filename is something like "MPIPTVSource<DATE>.log" (don't remember the exact name right now). Please post this log file.

 

[terrom]

Finaly I found the solution! My m3u playlist (my provider provided) starts from the 2nd string while the 1st one was empty. After deleting the first one everything went!