IPTV question (2 Viewers)

[wizard123]

So i got it to work using this format

#EXTINF:-1,BBC One HD
http://192.168.1.118/?&freq=10847&sr=23000&pol=h&msys=dvbs&fec=23&pids=0,260,5400,5401,5403

Works great except for that example above which is dvb-s2 but if i change it to dvbs2 instead of dvbs i get nothing, any idea what the format should be for dvbs2 ?

 

[mm1352000]

any idea what the format should be for dvbs2 ?

You can read the SAT>IP specification, section 3.5.11.
http://www.satip.info/resources

 

[KayDiefenthal]

first the triax dont Support the pids=all not
for scan must you use 0,16,17,18

to the question how the params look like

case "dvbs":

value = string.Format("src={0}&freq={1}&pol={2}&msys={3}&sr={4}&fec={5}&mtype={6}&pids={7}", _source, _frequency, _polarity, _modulationSystem, _symbolRate,_fecrate,_modulationType, _pids);

break;

case "dvbs2":

value = string.Format("src={0}&freq={1}&pol={2}&msys={3}&sr={4}&fec={5}&mtype={6}ro={7}&plts={8}&pids={9}", _source, _frequency, _polarity, _modulationSystem, _symbolRate, _fecrate, _modulationType, _rollOff, _pilotTones, _pids);

break;

 

[mm1352000]

first the triax dont Support the pids=all not

Stupid non-compliant equipment!
Thanks for your reply.

 

[KayDiefenthal]

not rigth

it is compilant and the device with SES test all Clients !

i call it Little dirty Diva

 

[mm1352000]

and the device with SES test all Clients !

i call it Little dirty Diva

LOL!

 

[wizard123]

first the triax dont Support the pids=all not
for scan must you use 0,16,17,18

to the question how the params look like

case "dvbs":

value = string.Format("src={0}&freq={1}&pol={2}&msys={3}&sr={4}&fec={5}&mtype={6}&pids={7}", _source, _frequency, _polarity, _modulationSystem, _symbolRate,_fecrate,_modulationType, _pids);

break;

case "dvbs2":

value = string.Format("src={0}&freq={1}&pol={2}&msys={3}&sr={4}&fec={5}&mtype={6}ro={7}&plts={8}&pids={9}", _source, _frequency, _polarity, _modulationSystem, _symbolRate, _fecrate, _modulationType, _rollOff, _pilotTones, _pids);

break;

Thank you any idea how i can find rolloff and pilot tones ? googling does not seem to throw up much

 

[mm1352000]

any idea how i can find rolloff and pilot tones ?

Those parameters probably don't matter for most tuners (they're detected automatically). For defaults I'd use 0.35 and pilots off (same as for DVB-S). If you want to get the actual values then I'd simply copy from the TV Server transponder lists [which come from FastSatFinder].

 

[wizard123]

They must do for this one as i get nothing without them but with them i get a stream just not bbc one hd that i'm after

 

[mm1352000]

They must do for this one as i get nothing without them but with them i get a stream just not bbc one hd that i'm after

Please post the full URL that you're using, and tell me which channel you're receiving.