IRSS not working with ITECIR (Intel NUC7 built-in IR) (1 Viewer)

Terriff

Portal Pro
March 28, 2008
75
3
Hi all. Haven't been here in a long time, but I've been using IRSS for like 10 years now and I still love it!

I know it's not really being developed anymore, but I'm wondering if anyone has had any luck with using IRSS with an Intel NUC7 mini computer. It comes with a built in IR receiver that shows in Device Manager as "ITECIR Infrared Receiver (EC)" and "Microsoft eHome Infrared Transceiver".

I've tried everything I can, including editing the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidIr\Remotes keys, removing, changing CodeSetNum values, etc, but IRSS Debug client never recognized any remote command from my RC6 MCE remote. I've also got a Logitech Harmony programmed as an MCE that doesn't recognize either, but both remotes work with my MCE IR dongle, just fine, just not the built-in ITECIR receiver.

There's a similar issue on the Intel forums here. The default MCE remote functions work with the default registry setup for remotes, but the default setup lacks so much compared to using IRSS.

The only option I have is to buy a new IR dongle, like FLIRC, or an MCE dongle, but I have so many remote mappings setup for IRSS and KODI and the Translator that I'd really love to keep using IRSS.

Anyone have any ideas? Is a new plugin needed to support the ITETECH CIR?
 

Terriff

Portal Pro
March 28, 2008
75
3
Any advice on writing a plugin for this IR receiver? I've got 20 years of software experience and would love a push in the right direction. @chefkoch, perhaps? :)
 

Users who are viewing this thread

Similar threads

Thanks, but I already tried that. The first 12 "IrDeviceV2" entries produced no messages at all. The last 2 (labelled "Mouse") produced messages at a rate which caused the HID Demo UI to become unresponsive. The only possible source for these messages was the RF remote I was using to operate the HID Demo UI. Why should an RF...
Thanks, but I already tried that. The first 12 "IrDeviceV2" entries produced no messages at all. The last 2 (labelled "Mouse")...
My HTPC recently stopped responding to IR signals. At first I suspected a HW problem, but the problem remains with two different...
Replies
22
Views
2K
I've attempted setting up the IRSS Suite blaster software and on most attempts it will not learn any codes. On the initial setup attempt I got 0-4 buttons learned from my STB remote and then it just stopped giving me the ability to learn and the notification would just change directly to IR code not learned immediately. Subsequent...
I've attempted setting up the IRSS Suite blaster software and on most attempts it will not learn any codes. On the initial setup...
I've attempted setting up the IRSS Suite blaster software and on most attempts it will not learn any codes. On the initial setup...
Replies
0
Views
731
Just gonna add my 2 cents worth here. I have the Inteset PC-IRS5-01 IR Receiver and it installed fine, as per their instructions. However I did encounter an issue getting my remote, a HP MCE Media Centre remote (RC6), to work as an expected. This, I eventually figured out, was due to the tuner card I was using at the time having a...
Just gonna add my 2 cents worth here. I have the Inteset PC-IRS5-01 IR Receiver and it installed fine, as per their instructions...
I have two Dell 990s, one is my MP player machine, the other the MP video recorder/server. Purchased Inteset USB IR receiver...
Replies
4
Views
5K
Thx, great resource! (and all the best the power button didn't do anything when I pressed it...:whistle:) It is certainly usefull and I'll dig into it later, but actually I was referring to what MP2 is supposed to do with the button presses, so I was looking for a list of keyboard shortcuts to see which ones "match" between MCE and...
Thx, great resource! (and all the best the power button didn't do anything when I pressed it...:whistle:) It is certainly usefull...
I hope somebody has a few pointers as to what I could try, before I do a support request with Hauppaughe. For hardware details on...
Replies
11
Views
5K
Great. :) No, me neither. ...and actually, I thought the MP Control plugin should have worked with MCE remotes straight out of the box without mapping/whatever. It's almost like the remote is generating non-standard commands. Very, very strange. You're so welcome! :) I'm happy to have been able to help, and that you got a solution...
Great. :) No, me neither. ...and actually, I thought the MP Control plugin should have worked with MCE remotes straight out of the...
My MCE remote no longer works. Win8.1 MP 1.13 MCE remote. Was working, but suddenly stopped. I have checked MP 1.13 config and...
Replies
11
Views
2K
Top Bottom