[WiP] madVR support in MP1 (13 Viewers)

[Sebastiii]

Guys, this build looks promising (i hope so)
Need @Freuli to test it too about the bug from intel that remove audio device, to know if i didn't break it and create regression

 

[azzuro]

Seb,
on the 433 build, i can see flickering on OSD during seek .
i will try to reproduce it this evening

 

[Sebastiii]

Yes the flickering is maybe because the seek is done in a thread now to avoid Some freeze.

From Tapatalk

 

[joecrow]

v443, (FCU workarround not enabled) on its own on my HTPC (1703, recent but not latest AMD vid. drivers), is looking good so far. TV, OV, HD,SD vids and 3D MVC both fullscreen and windowed also resume from sleep.
With Auto3D installed though things got very weird. I initially tried to set it up to switch my Phillips TV into 3D mode when I played a 3D SBS but could not get it to work, Auto3D detected it correctly but stayed in SBS mode. On stop the Videos menu was also SBS, very briefly before the TV switched to 3D and then after manually switching 3D off on the TV and hitting back to return to the homescreen that was now in SBS mode (see screenshot) . Got exact same with Auto3D set to "No Device" (as per attached log). I had to disable the Auto3d plugin to stop this

 

[Freuli]

Hi Sebastiii,

I was out skiing over the weekend. First race days this season for my son.
I hope to try tonight. Should I switch on the FCU or not?

Regards
Markus

 

[Sebastiii]

Hi Markus,

Yes FCU should be ON for you, you can try with it OFF for testing but ON will work better on your side and nice for skiing

 

[Sebastiii]

v443, (FCU workarround not enabled) on its own on my HTPC (1703, recent but not latest AMD vid. drivers), is looking good so far. TV, OV, HD,SD vids and 3D MVC both fullscreen and windowed also resume from sleep.
With Auto3D installed though things got very weird. I initially tried to set it up to switch my Phillips TV into 3D mode when I played a 3D SBS but could not get it to work, Auto3D detected it correctly but stayed in SBS mode. On stop the Videos menu was also SBS, very briefly before the TV switched to 3D and then after manually switching 3D off on the TV and hitting back to return to the homescreen that was now in SBS mode (see screenshot) . Got exact same with Auto3D set to "No Device" (as per attached log). I had to disable the Auto3d plugin to stop this
View attachment 195439

Is this possible that it's 3D MVC mode triggered ?
Will analyse log

 

[azzuro]

hummm,
only for say new madvr release

madVR v0.92.11

* added 2 new lower "remove compression artifacts" strengths
* slightly improved "remove compression artifacts" quality at lower strengths
* "remove compression artifacts" now always runs as part of NGU (if possible)
* display bitdepth now defaults to new "auto" setting (read from EDID)
* extended "if there are big black bars, reduce bar size" option range
* render target display is now shown in bold in the settings dialog
* added support for "execute command line on profile switch"
* when OS "HDR and Advanced Color" switch is active, FSE mode is disabled
* removed "exclusive" / "windowed" mode OSD notification
* added "(OS HDR)" vs "(NV HDR)" vs "(AMD HDR)" OSD information
* added downscaling "LL" (Linear Light) information to OSD
* added keyboard shortcut for opening settings dialog (default Ctrl+S)
* added keyboard shortcut for toggling seekbar on/off
* added keyboard shortcut for showing seekbar for 5 seconds
* added keyboard shortcut for toggling debanding on/off vs strength
* added file tag "detectBlackBars=on|off" or "blackBarDetection=on|off"
* added file tag "hdr=on|off" or "transfer=hdr|sdr|2084|709"
* added "battery" profile variable
* added "fullscreen" profile variable, can be exclusive or windowed
* renamed "fseMode" profile variable to "exclusive" ("fseMode" still works)
* fixed: "display" profile variable didn't work properly
* fixed: little "let madVR decide" chroma quadrupling bug
* fixed: screenshots were distorted with when using "crop black bars"
* fixed: screenshots in paused state sometimes crashed madVR
* fixed #320: make seeking to start of movie easier with FSE mode seek bar
* fixed #336: madHcCtrl: 3DLUT file path is evaluated for remote instance
* fixed #406: typing in "devices" profiles could jump to other pages
* fixed #481: distorted colors with Y416 input and DXVA processing
* added workaround for subtitle renderer crashes (XySubFilter, AssFilterMod)
* added workaround for PotPlayer OSD render crashes

 

[Sebastiii]

v443, (FCU workarround not enabled) on its own on my HTPC (1703, recent but not latest AMD vid. drivers), is looking good so far. TV, OV, HD,SD vids and 3D MVC both fullscreen and windowed also resume from sleep.
With Auto3D installed though things got very weird. I initially tried to set it up to switch my Phillips TV into 3D mode when I played a 3D SBS but could not get it to work, Auto3D detected it correctly but stayed in SBS mode. On stop the Videos menu was also SBS, very briefly before the TV switched to 3D and then after manually switching 3D off on the TV and hitting back to return to the homescreen that was now in SBS mode (see screenshot) . Got exact same with Auto3D set to "No Device" (as per attached log). I had to disable the Auto3d plugin to stop this
View attachment 195439

Are you able to reproduce it each time ?

 

[Freuli]

Hello,

unfortunately, the new version doesn't work for me.
Starting mkv with madvr is failing. Independently FCU on or off. Starting it works, but it needs a long time before it starts running. Pressing stop key, MP is crashing without any message from madvr.
With EVR and MP DRR it's working properly.

Regards
Markus