MediaPortal SVN-Snapshot:-02-06-2010 13-59h - Revision:24975.rar (2 Viewers)

Status
Not open for further replies.

gibman

Retired Team Member
  • Premium Supporter
  • October 4, 2006
    2,998
    1,372
    Aarhus
    Home Country
    Denmark Denmark
    Re: AW: MediaPortal SVN-Snapshot:-02-06-2010 13-59h - Revision:24975.rar

    If you see picture corruption using DXVA on certain h.264 channels on an ATI based card.
    Then u are probably experiencing this particular bug.
    Should be fixed in upcoming catalyst drivers 10.2.
    more info here :
    Celebrating Windows 7 | Nigel Dessau

    For the time being you can disable dxva (if this is even your problem).

    /gibman

    With this SVN, LiveTV HD channels are still blocky with Win7 and the inbuild audio/video codecs.
    CPU load is below 25% so HW acceleration seems to be active.

    This is 100% reproducible for "Das Erste HD" and "ZDF HD".
    Please let me know if you need logs or a sample TS file...

    UPDATE
    Ok, attached are logs from "Das Erste HD".
    The corresponding TS file can be found here:
    ftp.team-mediaportal.com
    Folder "DVB-S" --> Filename "MPUserFromGER_win7_HD_blocky.zip"
    Especially the last 10 seconds of the file are horrible!
     

    fmulders

    MP Donator
  • Premium Supporter
  • June 3, 2009
    99
    14
    50
    Home Country
    Netherlands Netherlands
    Record icon does not disappear from recordings view

    Just a smal issue, but still a bug.

    The record icon, shown on the recording show, in recording view, will not disappear when you stop recording.
    • Start a recording and look in recording view. You see the icon appearing letting you know it is recording that show.
    • Now stop recording.
    • You see the icon in the top left corner disappear, so it stopped.
    • Look at recording view again, you will see the recorded show but it is still showing the icon there.
    • Only a restart off MP will solved this issue.
     

    Ruud

    MP Donator
  • Premium Supporter
  • December 5, 2004
    276
    6
    Home Country
    Netherlands Netherlands
    Channel Scrambled?

    Hi,

    test synopsys:
    1. clear all logs
    2. reboot
    3. goto TV
    4. press channel
    5. select RTL4 (not a FTA channel, but I have valid CI subscription for it)
    6. after some time a window pops up stating: RL4 channel scrambled
    7. retry
    8. same message
    9. exit MP and run log collector

    please note that:
    1. I have a valid CI subscription!
    2. when recording on this (but also other scrambled) channels, eventually recording works but only after many retries (difference between timeshifting: 1st try -> popup, and recording: endless (?) retries)

    I have notices that when I keep trying to tune to a scrambled channel eventually it will work and that it then will work first time tuning to other channel.

    Same for radio channels.

    If I can 'fix' this by making different config setting, please advise ;)

    hope this helps,
    Regards,
    Ruud.
     

    disaster123

    MP Donator
  • Premium Supporter
  • May 14, 2008
    3,558
    434
    Home Country
    Germany Germany
    AW: Re: AW: MediaPortal SVN-Snapshot:-02-06-2010 13-59h - Revision:24975.rar

    If you see picture corruption using DXVA on certain h.264 channels on an ATI based card.
    Then u are probably experiencing this particular bug.
    Should be fixed in upcoming catalyst drivers 10.2.
    more info here :
    Celebrating Windows 7 | Nigel Dessau

    For the time being you can disable dxva (if this is even your problem).

    /gibman

    With this SVN, LiveTV HD channels are still blocky with Win7 and the inbuild audio/video codecs.
    CPU load is below 25% so HW acceleration seems to be active.

    This is 100% reproducible for "Das Erste HD" and "ZDF HD".
    Please let me know if you need logs or a sample TS file...

    UPDATE
    Ok, attached are logs from "Das Erste HD".
    The corresponding TS file can be found here:
    ftp.team-mediaportal.com
    Folder "DVB-S" --> Filename "MPUserFromGER_win7_HD_blocky.zip"
    Especially the last 10 seconds of the file are horrible!

    I've tried Cat 9.8 - 10.1 - are you shure that this bug is in all releases? Do you know if it is already fixed 10.2 beta?

    @all
    could a dev please tell me what logs you need for dshowhelper problems? All dshowhelpers after 24800 results in a lot of stuttering for me
     

    riksmith

    Portal Pro
    April 18, 2009
    1,856
    322
    Home Country
    Netherlands Netherlands
    Re: Record icon does not disappear from recordings view

    Just a smal issue, but still a bug.

    The record icon, shown on the recording show, in recording view, will not disappear when you stop recording.
    • Start a recording and look in recording view. You see the icon appearing letting you know it is recording that show.
    • Now stop recording.
    • You see the icon in the top left corner disappear, so it stopped.
    • Look at recording view again, you will see the recorded show but it is still showing the icon there.
    • Only a restart off MP will solved this issue.

    Oops... i also noticed this and forgot too report. I tried to disable the database caching and that seems to work.

    i have the following situation:

    i have a recording running. while it's recording, i am watching another program. now i want to switch to the recording. i open epg, select the red marked program, press ok and it runs the recording from livepoint without asking.
    if going to the records and select the actual recording, i am asked to start the record from beginning or start at the current live point.

    shouldn't I be asked where to start, if selecting the recording in EPG?

    You should, and I can confirm here that this is working.

    Edit: this was working, fixes are in SVN around 24925. I can confirm that it is not working with Maya Blue and Blue3 Wide skins.

    RikSmith - these are your fixes, right? Are you able to check if the EPG fix I tested made it into SVN?

    Edit2: the changes were committed in SVN 24928, and were working. The only other change to affect the relevant file (TvGuideBase.cs) was in SVN 24962, fixing mantis 2684. It is reasonable to assume that this fix broke the earlier fix, but not possible to confirm without further testing.

    Gibman, Seidelin - could you please check?

    Mark

    No this are not my changes, mine are in the tv recordings area, not the guide.

    Edit: Just checked the code, it will work for series but definitively not for normal recordings.
    Please test if series does work at your setup.

    Edit 2: I am making a patch.
     

    riksmith

    Portal Pro
    April 18, 2009
    1,856
    322
    Home Country
    Netherlands Netherlands
    Re: Record icon does not disappear from recordings view

    i have the following situation:

    i have a recording running. while it's recording, i am watching another program. now i want to switch to the recording. i open epg, select the red marked program, press ok and it runs the recording from livepoint without asking.
    if going to the records and select the actual recording, i am asked to start the record from beginning or start at the current live point.

    shouldn't I be asked where to start, if selecting the recording in EPG?

    Patch made: https://forum.team-mediaportal.com/...g-guide-only-working-series-77414/#post574415
     

    Brownard

    Development Group
  • Team MediaPortal
  • March 21, 2007
    2,290
    1,872
    Home Country
    United Kingdom United Kingdom
    Re: MediaPortal SVN-Snapshot:-02-06-2010 13-59h - Revision:24975.rar

    Hi

    MP is still crashing on me when using skip steps with TV. It only seems to occur when using rtsp in multiseat and skipping around near the live point. Sometimes you can get a way with it for a while but the attached logs show a crash after 3-4 skips.

    If you need any more info let me know.

    :D
     

    romuz

    Retired Team Member
  • Premium Supporter
  • July 26, 2008
    1,045
    250
    Moskau
    Home Country
    Russian Federation Russian Federation
    Re: MediaPortal SVN-Snapshot:-02-06-2010 13-59h - Revision:24975.rar

    Hi
    with current svn and multiseat(rtsp) most of the time all working great,
    but sometimes while playback im getting logs in streamingserver like this:
    07-02-2010 14:07:59.293 Seeking beyond the end position: 1478339412 > %I64d
    07-02-2010 14:07:59.652 Seeking beyond the end position: 1478436232 > %I64d
    as result playback problems at that time
    what can cause that type of error?

    seeking helps to fix it.

    ps %I64d i think becouse a typo in
    multifilereader.cpp
    LogDebug("Seeking beyond the end position: %I64d > %%I64d", m_currentPosition, m_endPosition);
     

    disaster123

    MP Donator
  • Premium Supporter
  • May 14, 2008
    3,558
    434
    Home Country
    Germany Germany
    AW: MediaPortal SVN-Snapshot:-02-06-2010 13-59h - Revision:24975.rar

    gibman
    even with cat 10.2 RC2 ZDF HD, ARD HD and Arte HD are still blocky heavy stuttering and not viewable. Have you tested the .ts file i've uploaded?

    Also i cnanot access the video acceleration settings with dxvachecker anymore since 10.2 :-(
     
    Status
    Not open for further replies.

    Users who are viewing this thread

    Top Bottom