Mobile phone as remote Control (Bluetooth) (1 Viewer)
- Thread starter alamo.de
- Start date
Belgium
Hi,
It works out of the box, no need for configuration.
Just enable it in windows, find your mobile & connect it. It will work as an mouse or whatever your mobile can do.
I just use a modified skin (on the mobile) for MP nothing else.
Regards
Roy
It works out of the box, no need for configuration.
Just enable it in windows, find your mobile & connect it. It will work as an mouse or whatever your mobile can do.
I just use a modified skin (on the mobile) for MP nothing else.
Regards
Roy
Users who are viewing this thread
Similar threads
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall rules were set to Public. I couldn't connect to the new TV Server from my old single-seat installation running 32-bit until I changed all MP-related firewall rules on the new machine to Private. Before I did...
Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall...
Server and client on modern uptodate Windows 11 desktop. Software is Server and Client version x86 1.38.003
Remote client on...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting power settings for "Intel Graphics". I set it to Maximum Performance. I tried many other things so it could be a combination of them, but this was the last thing I did and I haven't had the problem return...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting...
I'm running MP1 as a client only on this:
https://www.amazon.com/dp/B0DZX5DWS5?ref_=pe_123509780_1038749300_t_fed_asin_title&th=1...
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching live TV. I've now ticked the box to "Use EVR for LiveTV", with a default display refresh rate of 50Hz. In combination with tweaking some of the Nvidia 3D settings for the MP executable only, I now have a...
After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching...
Every so often, when I switch to a TV channel, my MP client stops accepting user inputs, either from the remote or keyboard/mouse...