MPDisplay++ - Extended Display/Touchscreen Plugin (1 Viewer)

[synack]

AW: MPDisplay2 - MP Secondary Display

argh, same situation here but after the update it wont work, in log is only a start message...

Have tryed with deinstall and fresh install (by hand), nothing??

Where could i look for the problem (which log)?
Any idea?

Regards
Holger

 

[Peter2]

Re: MPDisplay2 - MP Secondary Display

Sorry, can't help you since I don't know a lot about it - just started using it and the only thing I found out is how to modify the layout of some screens.

 

[MrCrabs]

Re: MPDisplay2 - MP Secondary Display

I just tried to install it under rc and it didn't work. Told me that it is not compatible. Maybe it works if you update to rc, but won't if you want to install it under rc?

 

[Wondermusic]

AW: MPDisplay2 - MP Secondary Display

Hi Guys,

I hope there will be a new version soon. Sa_ddam ist still working on the Server Part of MPD2. This is a neccessary way to let the plugin work under different situations.
Problem is: While the Server Part is not ready, gdl and sunedane can not pick up with the GUI.
But - there is still a progress on the plugin - it just takes much more time than expected.... Sorry for that!

Cheers,
Wonder

 

[Samdezwam]

Re: MPDisplay2 - MP Secondary Display

Hello,

When using the RC, which skins can be used? I was able to load the plugin, but when trying to config, I got an error saying the skin files were missing. When trying to install a skin package, I instantly got an error (dependency error, wrong MP version).

Thanks,
Sam

 

[popy]

AW: MPDisplay2 - MP Secondary Display

Hi!

Does anybody have it run under RC? Under Beta it run for me well but nothing under RC.
Maybe my mistake but can't solve it.

Regards
Holger

Hey Synack.

Have update beta to RC and MPDisplay2 Crashes Mediaportal in Mediaportal Beta there wasnt this issue:

Ii have a directX exception "E_OUTOFMEMORY"
Its reproduceable with the following steps:

• Let PowerScheduler++ power down the system to S3
• PowerScheduler++ resumes the htpc every day on 19:00 for a scheduled recording and after that it goes again to S3
• Manual power up the htpc again (resume from S3) and bang MP has freezed

I cant get a debug log because after starting MP in debug mode (with provided tool) and it freezes (like described above) the debug tool is also killed by the exception

Here is the log - first exception:

2011-09-08 19:38:51.285392 [Info.][MPMain(1)]: Exception   :System.ArgumentException: Der Wert liegt außerhalb des erwarteten Bereichs.
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:51.286392 [Info.][MPMain(1)]: Exception   :Der Wert liegt außerhalb des erwarteten Bereichs.
2011-09-08 19:38:51.286392 [Info.][MPMain(1)]:   site      :Void PresentInternal(Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, IntPtr)
2011-09-08 19:38:51.287392 [Info.][MPMain(1)]:   source    :Microsoft.DirectX.Direct3D
2011-09-08 19:38:51.287392 [Info.][MPMain(1)]:   stacktrace:   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:51.481403 [Info.][MPMain(1)]: Exception   :System.ArgumentException: Der Wert liegt außerhalb des erwarteten Bereichs.
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:51.482403 [Info.][MPMain(1)]: Exception   :Der Wert liegt außerhalb des erwarteten Bereichs.
2011-09-08 19:38:51.482403 [Info.][MPMain(1)]:   site      :Void PresentInternal(Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, IntPtr)
2011-09-08 19:38:51.482403 [Info.][MPMain(1)]:   source    :Microsoft.DirectX.Direct3D
2011-09-08 19:38:51.483403 [Info.][MPMain(1)]:   stacktrace:   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:51.680415 [Info.][MPMain(1)]: Exception   :System.ArgumentException: Der Wert liegt außerhalb des erwarteten Bereichs.
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:51.681415 [Info.][MPMain(1)]: Exception   :Der Wert liegt außerhalb des erwarteten Bereichs.
2011-09-08 19:38:51.681415 [Info.][MPMain(1)]:   site      :Void PresentInternal(Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, IntPtr)
2011-09-08 19:38:51.681415 [Info.][MPMain(1)]:   source    :Microsoft.DirectX.Direct3D
2011-09-08 19:38:51.682415 [Info.][MPMain(1)]:   stacktrace:   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:51.880426 [Info.][MPMain(1)]: Exception   :System.ArgumentException: Der Wert liegt außerhalb des erwarteten Bereichs.
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:51.880426 [Info.][MPMain(1)]: Exception   :Der Wert liegt außerhalb des erwarteten Bereichs.
2011-09-08 19:38:51.881426 [Info.][MPMain(1)]:   site      :Void PresentInternal(Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, Microsoft.DirectX.PrivateImplementationDetails.tagRECT*, IntPtr)
2011-09-08 19:38:51.881426 [Info.][MPMain(1)]:   source    :Microsoft.DirectX.Direct3D
2011-09-08 19:38:51.881426 [Info.][MPMain(1)]:   stacktrace:   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)
2011-09-08 19:38:52.077437 [Info.][MPMain(1)]: Exception   :System.ArgumentException: Der Wert liegt außerhalb des erwarteten Bereichs.
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
   bei Microsoft.DirectX.Direct3D.Device.Present()
   bei MediaPortalApp.Render(Single timePassed)

The logs are really big, so i cant upload it here.
I have uploaded it to zippyshare: Zippyshare.com - log - MP.zip

If i disable MPDisplay2 plugin, the error is also gone.
So it seems MPDisplay2 crash my whole Mediaportal

Hoping for a new version soon, because my secondary monitor looks really bad without MPDisplay2.

cu
pOpY

 

[noxx2]

AW: MPDisplay2 - MP Secondary Display

how can i install this plugin with MePo 1.2 RC ????

 

[rekenaar]

Re: MPDisplay2 - MP Secondary Display

Hi noxx2

Not using it myself, but it looks like this one should work on MP RC:
Download Section

 

[MrCrabs]

Re: MPDisplay2 - MP Secondary Display

OK, I got it working on my iPad. Is it right, that MPD2 works on an iPad only as a screen with no touch function? That would be very sad...

 

[popy]

AW: Re: MPDisplay2 - MP Secondary Display

Hi noxx2

Not using it myself, but it looks like this one should work on MP RC:
Download Section

Yes its work (comming from MP 1.2 Beta) and updated to RC but in may case its very instable on RC