My Alarm does not wake up computer in latest SVNs (1 Viewer)

[GoldenEye]

MediaPortal Version: Productive: 2.0.0.0 latest CVS
Windows Version: Windows XP Professional SP2
CPU Type: AMD Athlon 64 3200
HDD: Samsung SP1614N 160GB
Memory: 1GB
Motherboard: Shuttle FT20
Motherboard Chipset: ATI RS480 + Uli M1573
Motherboard Bios: Phoenix Award WorkstationBIOS v6.00PG
Video Card: ATI Radeon XPress 200 Series (onboard)
Video Card Driver: ati2dvag (6.14.10.6606)
Sound Card: Realtek HD Audio ALC880 (onboard)
Sound Card AC3:
Sound Card Driver: 5.10.00.5288
1. TV Card: Hauppauge PVR-500 (Tuner 1)
1. TV Card Type: analog
1. TV Card Driver: 2.0.43.24103
2. TV Card: Hauppauge PVR-500 (Tuner 2)
2. TV Card Type: analog
2. TV Card Driver: 2.0.43.24103
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: NVIDIA Puerevideo Platinum 1.02.150
MPEG2 Audio Codec: NVIDIA Puerevideo Platinum 1.02.150
Satelite/CableTV Provider: Cablecom DigiTV (via Settop Box)
HTPC Case: Shuttle xpc
Cooling:
Power Supply:
Remote: Q-Sonic Master Remote 6in1 (X10)
TV: Sanyo PLV-Z2 Beamer
TV - HTPC Connection: DVI

Since about a week, my Alarm does not work anymore. I can reproduce this by the following steps:
- Access My Alarm in Mediaportal
- Set a new alarm

- Type: Single
- Media Type: Radio
- Set date and time
- Wake up MediaPortal: Yes
- Choose a channel
- Set Alarm active​

- Go back to home screen
- Set MP in standby

--> The computer never wakes up.

This used to work in 2.0.0.4.

G.

PS: The log shows nothing special.

 

[ronilse]

Hi,
Only way to see whats happen on your system it's the logs from what you describe above.

Regards
Roy

 

[GoldenEye]

Hi,
Only way to see whats happen on your system it's the logs from what you describe above.

Regards
Roy

Roy, thanks for your answer.

Here we go ...

G.

 

[ronilse]

MediaPortal Version: MP 0.2.0.0 (0.2.1.0) + latest available SVN
Windows Version: Windows MCE + All Updates
CPU Type: Intel Pentium D 940 3.2
HDD: 3 x 250 GB Samsung HD
Memory: 2 X Corsair 6400 DDR2 (2GB)
Motherboard: Asus P5WD2-E Premium
Motherboard Chipset: Intel 975X Express / Intel ICH7R
Motherboard Bios: Asus V0601
Video Card: Asus GeForce 7600GT 256MB GDDR3 Silent
Video Card Driver: NVIDIA ForceWare 92.91beta
Sound Card: Onboard Realtek ALC882M
Sound Card AC3: Coaxial out
Sound Card Driver: 5.10.0.5268
1. TV Card: Hauppauge PVR-150 MCE
1. TV Card Type: Analog
1. TV Card Driver: 2.0.43.24103
2. TV Card: Hauppauge HVR-1300 MCE
2. TV Card Type: Analog + DVB-t(testing)
2. TV Card Driver: 2.113.24030.0
3. TV Card: TerraTec Cinergy 2400i DT MCE
3. TV Card Type: DVB-T
3. TV Card Driver: 1.0.3.255
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Nvidia
MPEG2 Audio Codec: Nvidia
Satelite/CableTV Provider: CableTV + FTA (DVB-t)
HTPC Case: Silverstone SST-LC18S
Cooling:
Power Supply: NorthQ 4775-500S, ATX 500W Silent
Remote: MCE 2005 Europe (Hauppauge Clone)
TV: B&O AvantDVD
TV - HTPC Connection: Composite

Tested with MediaPortal 0.2.0.0 + svn-09-29-2006--20-41-Rev10596
Can confirm the issue when setting a alarm to wake up PC to play radio.

To reproduce:
Enable Alarm in MP Setup -> Plugin
Open MP Home -> Plugins -> Alarm & set a Alarm:

- Type: Single
- Media Type: Radio
- Set date and time (21:20)
- Wake up MediaPortal: Yes
- Choose a channel
- Set Alarm active

Go back to MP Home & let PowerScheduler Hibernate/Suspend PC
Wait for PC to wake up........... (start it if it goes way over the time)

The test also show the WebEPG startup via PS @ 21:15 (hibernated around 2 min later), so this indicates that PS can wake up the PC, but not when it's set by Alarm plugin.

I started PC @about 3 min over manual & set a new timer event (21:28) without hibernate, to know that it works when not hibernated. This alarm started as it should. Logs attached.

More info: This came in with changes in Revision 10417, undid this & it works again, hovever it conflicts with WebEPG plugin (after reverting to that rev)


Regards
Roy

 

[ronilse]

Hi,
This should now be fixed, just tested a private build of revision 10612 (all revision from that will have the fix) & it works again, thanks to micheloe


for testing & reporting bugs

Regards
Roy

 

[GoldenEye]

Roy

Thanks for this. I can confirm that my Alarm can wake my computer up again

However, there are two new issues:
- The monitor is not turned on after wake up invoked by my Alarm.
- It is not possible to send the computer into standby after it has been woken up by my Alarm.

I have opened another topic for those.

G.