Please help me to stop this tearing+a couple of other issues (5 Viewers)

[laeb66]

Take control over Nvidia and ATI cards

Use this drive it´s give much more control over your card and better image..

http://www.omegadrivers.net/

You gone love it

 

[CHli]

In my NVidia Driver I already setted VSYNC to ON since a while now and it didn't solve the problem.

In Nvidia's driver you can choose to let the application handle or to force. Mine is on forced mode of course.

Thought you had THE solution

 

[slayer]

yep same here I have tried extensively vsync on and off over the past few weeks with no difference in results

 

[laeb66]

Tearing + Nvidia

Have tryed eith Nvidia 5200 128 Mb AGP from Gainward..
No tearing !! Used the Omegadives driver..

Gone make a list over the change I done in my system..
Hope you can find anything that help you out..


Part 1:Bios changes..
Overclock: 100 (133 default ) System speed 2.09 GHz (2,8 GHz)
Dram speed 266 (366)
PCI lac.. 66/33 MHz (auto)
Spread spectrum AGP/PCI Disable (enable)
AGP Arti. 32 Mb (64 Mb) Allways set this to the half of your VGA memory
ex. 64 Mb/2=32 128 Mb/2=64


Part2: Windows performens. set to Maximum (balanced)
Swap file 0 Mb (auto)
1394 Network Inactive ( active)
1394 set to 400 Mb (100) Regestry entry.

Total running services 21
All hotfixes from MS..
Extra Hotfixes for DVB, Hotfix for 1394..

Part 3: Program installed
Win XP pro sp2 .
Theatertek dvd
Imon 1.8
ffdshow
vobsub
CDEX
DVD Shrink
MP 1.3.0 All CVS
OS2Grabber for EPG

System:
ASUS P4P800
Intel P4 2.8 GHz 512 Kb
2Gb Ram 400 MHz Kingston 4X512
Matrox Millenium 650 AGP 64 Mb
Zyxel G-360 Wirless PCI
Hercules Game Theatre XP PCI
Seagate S-ATA 200 Gb 7200 rpm 8 Mb
FireDTV -T

Fan less system..

Live TV Settings.
Vidieo codecscaler
Audio Codecscaler 4.1 system
De interlace mode: None
WRM9 :Windowless
Aspect ratiotretch

Filter settings_
Dscaler video.. De-interl..mode :auto
DVB Aspct:19:9
IDTC to use:MMX
Display forces sub: ONThe rest is set to OFF


If you need more .. Just ask..

 

[vbap]

Live TV Settings.
Vidieo codecscaler
Audio Codecscaler 4.1 system
De interlace mode: None
WRM9 :Windowless
Aspect ratiotretch

Are you really using VMR9 Windowless? What happends if VMR9 Renderless is used?[/quote]

 

[vbap]

OK, on my clean MCE2005 install, I set the Nvidia graphics driver properties so that VSYNCH is set to ON (by default, it is set to "Let application decide", if you deselect this, then you can change the value to eitehr ON or OFF).

LiveTV still tearing.

Next Steps:
1. Try a refresh rate of 50Hz. If not fixed, back to 60Hz.
2. PCI Latency. If not fixed, reset back to original.
3. Frodo's suggested MS patches. If not fixed, I'll still leave these ones in.

I know I've tried these before, but now I have a clean install, I want to try again in a much more controlled manner.

Stay tuned...

 

[laeb66]

OK, on my clean MCE2005 install, I set the Nvidia graphics driver properties so that VSYNCH is set to ON (by default, it is set to "Let application decide", if you deselect this, then you can change the value to eitehr ON or OFF).

LiveTV still tearing.

Next Steps:
1. Try a refresh rate of 50Hz. If not fixed, back to 60Hz.
2. PCI Latency. If not fixed, reset back to original.
3. Frodo's suggested MS patches. If not fixed, I'll still leave these ones in.

I know I've tried these before, but now I have a clean install, I want to try again in a much more controlled manner.

Stay tuned...

I did a test yesterday with a Nvidia 5200 128 Mb card and diffrent driver..
I hookt up the system to a broadcast analyser and this is the resault..
This is a low budget card 40euro!

Resolution used: 800*600:1024*768:1280*720
VGA and DVI signal

Nvidia Driver ver.77.77: V-sync set to on..
TS on : H-sync is fine C-sync jumpy pending of range +- 0,5-1%
TS off : H-sync in range 0.1-0.4% V-sync pending alot +- 4-14%

Omega drive set 1.6693: V-sync set to always on
TS on : H-sync is fine C-sync jumpy pending of range +- 0,1-0.3%
TS off : H-sync isfine V-sync pendig in range +- 0,1-0,4%

No bigger diffrent off codec use...
More stability in the signal on 75Hz then 60Hz

But this is note a signal I want to use for broadcasting!!!

Gone make some test on a ATI

 

[laeb66]

Live TV Settings.
Vidieo codecscaler
Audio Codecscaler 4.1 system
De interlace mode: None
WRM9 :Windowless
Aspect ratiotretch

Are you really using VMR9 Windowless? What happends if VMR9 Renderless is used?

[/quote]

Yes I use Windowless..
Note any big diffrent using Renderless!!! The onli thing is that i can get
3 thin lines in fast moving scens .. Dont happen so offen...
Think this is a memory problem on my card .. only 64 Mb

 

[voxmortis]

I have a 6600GT, latest drivers (78.03) and I get tearing on DVDs, videos and live TV. It's usually only when the picture pans or there's lots of movement on the screen... but it's DEFINTELY an MP thang, cos PowerDVD, WinDVD, mediaplayer, mediaplayer classic etc etc all run perfectly. Only MP gives me this tearing.

Fortunately the wife's eyes must be on a different frequency than mine... she's not picking it up.

It annoys the t!ts off me though.

I'll try the Timeshift 'fix' tonight and also the VSync fix... I can also tweak the Hz... BUT it's only MP giving me this issue!

Any ideas out there?!

 

[cage121]

I do have the same problem as voxmortis, with a twinhan dvb-s card. Its very annoying. Do anyone have a solution to this problem? It must be a MP problem, cus all the other players work fine.