Problems with TT S2-3200 for DVB-S2 (1 Viewer)

[te3hpurp]

kszabo

Hi. First thing I need is to have your logs, when errors happen. You need to start mp in debug mode to have clean logs
as explained here:
MEDIAPORTAL - free media center - Reporting bugs becomes a lot easier in 1.1.0 RC3

Then I can compare it with mine. I'm using 5.0.2.1 drivers and It works wery good.

Br,

 

[dlarge500]

AW: Problems with TT S2-3200 for DVB-S2

no i don`t think, i have the same issues with Win7 with all drivers from Technotrend.
This problems i have always my htpc come from standby.

 

[kszabo]

here are the logs, generated with RC3 debug mode.

what I did:
1. start MP -> TV Guide -> try start watching N24 (Astra 19,2°E) -> unable to start graph
2. video section -> play recorded .ts file without problem (recorded with same hardware and driver, but under Vista not Win7)
3. close MP

more information:
- tried all drivers (5.0.0.6 to 5.0.2.1 beta for Win7)
- fresh reboot does not help (no standby problem)
- same Hardware works fine under Vista (MP 1.0.2 and 1.1 RC2 tested)

Setup:
- CPU Phenom 8450
- RAM 4 GB
- Onboard ATi HD3200 with Catalyst 10.4
- Windows 7 HP 32 bit
- Technotrend DVB-S2 HD3200, Diseq switch, 2 Dishes, Driver 5.0.0.19

thanx

 

[te3hpurp]

Thak you for your logs. I start checking them. If I cant find any obvious reasons, then i need to compare logs with mine and that might take some time. I hope tomorrow I have something,
Br,

 

[te3hpurp]

Hi.

Okay. It looks like for some reason your tuningdetail for N24 is not correct.
From kingofsat:

Astra 1L (19.2E) - 12544.75 H - Txp: 107 - Keila: Astra 1L DVB-S (QPSK) - 22000 5/6 (34.2 Mbps) - NID:1 - TID:1107
N24
Germany News ProSiebenSat.1 Vapaa 17503 1023 1024 ger 99 1023 35

And from your logs, your tuningdetails for N24 are:
dvbs: TuneVBS:tvroSiebenSat.1 N24 Freq:10921000 ONID:1 TSID:1107 SID:17503 PMT:0x63 FTA:True LCN:3787 SymbolRate:22000 Modulation:ModNotSet Polarisation:LinearH InnerFecRate:Rate5_6 DisEqc:Level1BB band:Universal Pilot:NotSet RollOff:NotSet
So ferquency is not right.

This might sometimes happen, when if channel has moved from one transponder to another
and old one still transmits tuning parameters for that channel, even if its not transmitting. And when this
wrong transponder is scanned after correct one during channel scan, tuning details are updated to wrong ones.

I suggest you use satellite update in SetupTv to fetch lates satellite info and do rescan, if not allready done.
If you have done it. Then you might need to manually edit satellite transponders. They are in "C:\ProgramData\Team MediaPortal\MediaPortal TV Server\TuningParameters\dvbs" if ypu used default installation location. There is file "19.2°E Astra 1H,1KR,1L,1M.xml"

Similar has happened to me with Thor sometimes. And i edited file to contain only transponedrs I want.
And kingofsat is good helpfor editing file.

Br,

 

[kszabo]

Thanx for your help. I will check this.

But I must say I did a fresh install of Win7, with fresh install of MePo 1.1, first updated satellite list and made a fresh scan of Astra and Thor... it should have function (did also in the past)

 

[te3hpurp]

Thanx for your help. I will check this.

But I must say I did a fresh install of Win7, with fresh install of MePo 1.1, first updated satellite list and made a fresh scan of Astra and Thor... it should have function (did also in the past)

Hi.
As i explained, even if you fetch new satellite info it might be out of Mp's hand, because if wrong(old) transponder keeps sending channel info and it is scanned later during channel scan it overwrites tuningdetails. If you dont want to remove any transponders, just swap their order and do channel scan. You can use channel search in kingofsat to find transponders and satellites that transmits that channel.

Br,