Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-03-05)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: NVIDIA Audio Decoder
Video Codec: NVIDIA Video Decoder
CPU Type: AMD Athlon XP 2000+
Memory: 511 MB
Motherboard: MK79G-1394 (AOpen)
TV Card Model: Hauppage Nova-t (TT)
TV Card Type: DVB-t
TV Card Driver: 4.4.10.12
Video Card Model: Radeon 9800 Pro (128 MB)
Video Card Driver: 8.191.0.0
Video Card Resolution: 1024x576
Video Render Type: VMR9
Audio Card Model: NVIDIA(R) nForce(TM) Audio
Audio Card Driver: 6.14.462.0
Synopsis::
I recently posted this message, but so far nobody has responded to it. With the latest CVS, resuming from stand by still breaks 'my tv' (MP hangs). I've done a few more tests since.
First I tried going into stand by and resuming with MCE2K5 itself, from the home menu with the TV stopped. The DVB-t card still works properly after the system resumes, which confirms the system itself is working fine, and that the problem is related to MP.
Then I went back to MP and used the 'devcon' utility to restart the dvb-t card after resuming, but before firing up MP's 'my tv' module. This made no difference, MP still hangs after selecting 'my tv'.
However, if I restart MP after the system has resumed, 'my tv' works fine again. I don't think a restart of MP should be required and this is also a bit impractical, as I've got a dedicated media PC with just the MCE remote (can't restart MP only from menu), and in the future I would like to start using powerscheduler to wake up the system for recordings.
I would appreciate it if somebody else could try the same scenario and report back. If it is a general bug, the dev team will hopefully look into it, as it would be extremely useful to have this working properly.
I can do more testing and/or post log files if required.
MediaPortal Version: 0.2.0.0 RC2 (2006-03-05)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: NVIDIA Audio Decoder
Video Codec: NVIDIA Video Decoder
CPU Type: AMD Athlon XP 2000+
Memory: 511 MB
Motherboard: MK79G-1394 (AOpen)
TV Card Model: Hauppage Nova-t (TT)
TV Card Type: DVB-t
TV Card Driver: 4.4.10.12
Video Card Model: Radeon 9800 Pro (128 MB)
Video Card Driver: 8.191.0.0
Video Card Resolution: 1024x576
Video Render Type: VMR9
Audio Card Model: NVIDIA(R) nForce(TM) Audio
Audio Card Driver: 6.14.462.0
Synopsis::
I recently posted this message, but so far nobody has responded to it. With the latest CVS, resuming from stand by still breaks 'my tv' (MP hangs). I've done a few more tests since.
First I tried going into stand by and resuming with MCE2K5 itself, from the home menu with the TV stopped. The DVB-t card still works properly after the system resumes, which confirms the system itself is working fine, and that the problem is related to MP.
Then I went back to MP and used the 'devcon' utility to restart the dvb-t card after resuming, but before firing up MP's 'my tv' module. This made no difference, MP still hangs after selecting 'my tv'.
However, if I restart MP after the system has resumed, 'my tv' works fine again. I don't think a restart of MP should be required and this is also a bit impractical, as I've got a dedicated media PC with just the MCE remote (can't restart MP only from menu), and in the future I would like to start using powerscheduler to wake up the system for recordings.
I would appreciate it if somebody else could try the same scenario and report back. If it is a general bug, the dev team will hopefully look into it, as it would be extremely useful to have this working properly.
I can do more testing and/or post log files if required.