MediaPortal Version: 1.5.0
Description
Hi.
MP Version 1.6 Final (could not choose 1.6 in pulldown menu on top) Sys specs are up to date.
Since Upgrade from 1.6 pre to 1.6 Final I've encountered problems with more than one scheduled recording at the same time. I have a dual tuner DVB-S2 card so at least 2 recordings in parallel must be possible.
The first recording starts pretty normal. Then, when the second recording starts, the first one gets paused!!!, not stopped or aborted, until the scheduled recording time is over. I first thought about some hickups in SAT Signal. But this issue is reproducible on my system. I had a look at the log files and see, that the recording runs from scheduled start to stop time, but the .ts only runs from start to the time the next scheduled recording has started...
Sometimes it's the other way round. Then the second recording starts after the first one is finished. Both cases are captured in the attached tswriter.log. "Inspector Barnaby" has started too late at 01:15 (second case) and "Die Garmisch Cops" are finished too early at 05:15 instead of scheduled time 06:00 (first case) The "last changed" date of the .ts file is 06:00 as if it was running as wanted. But the file is to small and it's missing 45 minutes at the end.
I think this is probably caused by schedules priority system not recognising the other free tuner.
As I had the log level set to "error" the log files are not that good, I fear... But I've attached them nevertheless. I now have change this to "Debug" if more logs are needed in future.
The screenshot is showing my two tuners activated in TV Server. Both tuners are having signal and can be used without issues if I manually start recordings or timeshifting on both of them.
View attachment 143138
Could this be caused by the change in MySQL (from 5.1 to 5.6, done with install of 1.6 Final)?
I really need to fix this soon or I need to go back to 1.6 pre which was running pretty well here.
Steps to Reproduce:
Schedule overlapping recordings and see what's happen.
Description
Hi.
MP Version 1.6 Final (could not choose 1.6 in pulldown menu on top) Sys specs are up to date.
Since Upgrade from 1.6 pre to 1.6 Final I've encountered problems with more than one scheduled recording at the same time. I have a dual tuner DVB-S2 card so at least 2 recordings in parallel must be possible.
The first recording starts pretty normal. Then, when the second recording starts, the first one gets paused!!!, not stopped or aborted, until the scheduled recording time is over. I first thought about some hickups in SAT Signal. But this issue is reproducible on my system. I had a look at the log files and see, that the recording runs from scheduled start to stop time, but the .ts only runs from start to the time the next scheduled recording has started...
Sometimes it's the other way round. Then the second recording starts after the first one is finished. Both cases are captured in the attached tswriter.log. "Inspector Barnaby" has started too late at 01:15 (second case) and "Die Garmisch Cops" are finished too early at 05:15 instead of scheduled time 06:00 (first case) The "last changed" date of the .ts file is 06:00 as if it was running as wanted. But the file is to small and it's missing 45 minutes at the end.
I think this is probably caused by schedules priority system not recognising the other free tuner.
As I had the log level set to "error" the log files are not that good, I fear... But I've attached them nevertheless. I now have change this to "Debug" if more logs are needed in future.
The screenshot is showing my two tuners activated in TV Server. Both tuners are having signal and can be used without issues if I manually start recordings or timeshifting on both of them.
View attachment 143138
Could this be caused by the change in MySQL (from 5.1 to 5.6, done with install of 1.6 Final)?
I really need to fix this soon or I need to go back to 1.6 pre which was running pretty well here.
Steps to Reproduce:
Schedule overlapping recordings and see what's happen.