Hi
Sometimes my twinhan card fails to decode a scrambled channel and I was wondering what parameter I should try to increase first to see if that helps. The channel always comes ok when switching back and forward. But worse is when tve3 is recording and it happens, then the size of file is 0Mb and the recording totally fails. It happens most of the time when the tve3 is recording and nobody is whatching tv. When watching tv it normally works but maybe it fails 1 out of 50 times. So maybe there is a difference how tve3 is recording compared to when wtaching tv?
Do the tve3 use the settings below at all or is it just when whatching tv not recording?
is it
Tune
PAt
CAT
PMT
SDt
or any else?
please help
the log looks like this when it fails
2007-07-05 20:58:06 B subch:0 RunGraph: already running
2007-07-05 20:58:06 B subch:0 SetupPmtGrabber
id 41A sid:41A
2007-07-05 20:58:06 B subch:0 set pmt grabber pmt:41A sid:41A
2007-07-05 20:58:06 B subch:0 wait for pmt 41A
2007-07-05 20:58:06 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 D subch:0 OnPMTReceived() True
2007-07-05 20:58:07 D subch:0 SendPmt:41A 41A FFFFFFFF 2
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 D Decode pmt
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 D subch:0 SendPMT version:2 len:109 1050
2007-07-05 20:58:07 D Decode pmt
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D Twinhan: send PMT cam
efault len:86 video:0x423 audio:0x422
2007-07-05 20:58:07 D capmt:3 4 1A C5 0 0 2 E4 23 0 23 1 9 F 5 0 E0 35 10 1 1 13 1 20 14 3 2 5 8 9 F 5 0 E0 61 10 1 1 13 1 20 14 3 2 32 8 3 E4 22 0 23 1 9 F 5 0 E0 35 10 1 1 13 1 20 14 3 2 5 8 9 F 5 0 E0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D Twinhan: cam failed 0x8007001F
regards
Lasse
Sometimes my twinhan card fails to decode a scrambled channel and I was wondering what parameter I should try to increase first to see if that helps. The channel always comes ok when switching back and forward. But worse is when tve3 is recording and it happens, then the size of file is 0Mb and the recording totally fails. It happens most of the time when the tve3 is recording and nobody is whatching tv. When watching tv it normally works but maybe it fails 1 out of 50 times. So maybe there is a difference how tve3 is recording compared to when wtaching tv?
Do the tve3 use the settings below at all or is it just when whatching tv not recording?
is it
Tune
PAt
CAT
PMT
SDt
or any else?
please help
the log looks like this when it fails
2007-07-05 20:58:06 B subch:0 RunGraph: already running
2007-07-05 20:58:06 B subch:0 SetupPmtGrabber
2007-07-05 20:58:06 B subch:0 set pmt grabber pmt:41A sid:41A
2007-07-05 20:58:06 B subch:0 wait for pmt 41A
2007-07-05 20:58:06 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 D subch:0 OnPMTReceived() True
2007-07-05 20:58:07 D subch:0 SendPmt:41A 41A FFFFFFFF 2
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 D Decode pmt
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 B subch:0 wait for pmt 41A
2007-07-05 20:58:07 D subch:0 SendPMT version:2 len:109 1050
2007-07-05 20:58:07 D Decode pmt
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:423 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 35 10 1 1 13 1 20 14 3 2 5 8
2007-07-05 20:58:07 D descr2 pid:422 len:11 9 f 5 0 e0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D Twinhan: send PMT cam
2007-07-05 20:58:07 D capmt:3 4 1A C5 0 0 2 E4 23 0 23 1 9 F 5 0 E0 35 10 1 1 13 1 20 14 3 2 5 8 9 F 5 0 E0 61 10 1 1 13 1 20 14 3 2 32 8 3 E4 22 0 23 1 9 F 5 0 E0 35 10 1 1 13 1 20 14 3 2 5 8 9 F 5 0 E0 61 10 1 1 13 1 20 14 3 2 32 8
2007-07-05 20:58:07 D Twinhan: cam failed 0x8007001F
regards
Lasse
New Zealand