Scrambled channels, what to do to open them? (1 Viewer)

[e_razor]

TV-Server Version: 1.0.0.0 RC1 (refresh)
MediaPortal Version: 1.0.0.0 RC1 (refresh)
MediaPortal Skin: Default
Windows Version: Windows XP Sp3
CPU Type: Intel 3.0ghz p4
HDD: Seagate 15k SCSI
Memory: 1GB DDR
Motherboard: Elitegroup
Video Card: Nvidia Geforce 6200 256mb
Video Card Driver: Forcewave 169.21
Sound Card: Creative Audigy
Sound Card AC3: No AC3
Sound Card Driver:
1. TV Card: Terratec Cinergy S2 HD CI
1. TV Card Type: DVB-S/DVB-S2
1. TV Card Driver: 4.94.00.366
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Intervideo and others
MPEG2 Audio Codec: Intervideo and others
h.264 Video Codec: none
Satelite/CableTV Provider: 0.8W Thor
HTPC Case: Chieftech
Cooling: Standard
Power Supply: 550W OCZ
Remote: Microsoft oem
TV: Fujitusu siemens
TV - HTPC Connection: DVI

I've installed a brand new Terratec Cinergy S2 HD PCI with a common interface module. I have inserted a conax cam in the CI slot and inserted the subscription card into the CAM. (both card and cam tested on different locations). I select card and lnb settings in tv server setup and scan sucsessfully. The problem is that most channels are scrambled and theres doesnt seem to be a single setting for this in tv server. note that i have a valid subscription. Anyone got some hints where to start looking to fix this problem? i can see it getting correct epg datas for the channels. When i try to preview them on the tv server i get this error code "Preview failed: ChannelIsScrambled"

This is regarding the norwegian provider canal digital, using a Conax cam.

 

[noddan]

Have you checked the checkbox to say that the card has a cam? I don't remember excactly where it is and I'm testing sleep modes on my htpc right now but poke around in the settings and see if you can find it.

 

[MadDuke]

I just had the same problem - the setting is made in the TV Server Config.
TV Servers -> [Name of your TV Server]
Here you have to select the tuner-card that has a CAM and click 'Edit'
Tick 'Enable CAM...'