Sky UK/IT/AUS enhancements (1 Viewer)

Status
Not open for further replies.

Phathid

Portal Member
February 23, 2012
43
6
47
Home Country
United Kingdom United Kingdom
Ah ok I'm using it legally but respect forum rules so no further mention
 

miroslav22

Development Group Member
  • Premium Supporter
  • September 4, 2009
    703
    460
    Warwick
    Home Country
    United Kingdom United Kingdom
    I think the rules regarding MDAPI are a bit more relaxed these days. As long as you have your own subscription and you're not involved in anything illegal like card sharing then I don't think we mind too much :)
     
    Last edited:

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Sorry to contradict but the rules do still apply. I'm sure you know all the reasons that the rules were put in place. Unless the team agrees to change the policy I respectfully request that you continue to follow the guidelines. If you think the team should change the policy then I have no problem with you raising that suggestion.
     

    miroslav22

    Development Group Member
  • Premium Supporter
  • September 4, 2009
    703
    460
    Warwick
    Home Country
    United Kingdom United Kingdom
    Sorry to clarify what I meant was you don't need to * out MDAPI. There's no problem with mentioning that you use it, but we don't want detailed posts on how to set things up.
     

    Jay_UK

    Test Group
  • Team MediaPortal
  • October 6, 2009
    1,781
    283
    Derby
    Home Country
    United Kingdom United Kingdom
    Miroslav/mm1352000,

    It appears I had the issue with the lack of free cards again (well my other half did - I was at work!) :D

    I believe the issue happened around 13:50 today (8th Aug). From what she remembers, she woke the HTPC (single seat) from sleep, watched a TV series for 40 minutes, then tried to watch TV - at which point she got the error. She then rebooted it and it worked fine. The exact time might be off a little :rolleyes:

    I'd suggest looking in the TV.bak file... I crudely zip all the files in the log folder

    Please ignore any words beginning MD*.... ;)

    Many thanks,

    J.
     

    Attachments

    • justforyouguys.zip
      456.3 KB
    Last edited:

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Hiya Jay

    The relevant section of the logs seems to be this:
    [collapse]2012-08-08 13:49:37.625284 [(18)]: dvb:confused:ubmit tunerequest calling put_TuneRequest
    2012-08-08 13:49:37.625284 [(18)]: dvb:confused:ubmit tunerequest done calling put_TuneRequest
    2012-08-08 13:49:37.626284 [(18)]: subch:0 OnAfterTune
    2012-08-08 13:49:37.626284 [(18)]: RunGraph
    2012-08-08 13:49:37.626284 [(18)]: subch:0 OnGraphStart
    2012-08-08 13:49:37.626284 [(18)]: dvb: RunGraph
    2012-08-08 13:49:37.748291 [EPG Update thread(17)]: user:confused:ky UK remove
    2012-08-08 13:49:37.748291 [EPG Update thread(17)]: FreeSubChannel MD: tried to free non existing sub channel : 0
    2012-08-08 13:49:37.748291 [EPG Update thread(17)]: tvcard:FreeSubChannel: subchannels count 1 subch#0
    2012-08-08 13:49:37.748291 [EPG Update thread(17)]: DVB subch:0 Decompose()
    2012-08-08 13:49:37.749291 [EPG Update thread(17)]: FreeSubChannel CA: freeing sub channel : 0
    2012-08-08 13:49:37.749291 [EPG Update thread(17)]: tvcard:FreeSubChannel : no subchannels present, pausing graph
    2012-08-08 13:49:37.749291 [EPG Update thread(17)]: dvb:pauseGraph called
    2012-08-08 13:49:37.749291 [EPG Update thread(17)]: tvcard:FreeAllSubChannels
    2012-08-08 13:49:37.750291 [EPG Update thread(17)]: mdplug: FreeAllChannels
    2012-08-08 13:49:37.750291 [EPG Update thread(17)]: dvb:pauseGraph
    2012-08-08 13:49:37.887299 [EPG Update thread(17)]: Pausecard
    2012-08-08 13:49:37.888299 [EPG Update thread(17)]: dvb:pauseGraph called
    2012-08-08 13:49:37.888299 [EPG Update thread(17)]: tvcard:FreeAllSubChannels
    2012-08-08 13:49:37.888299 [EPG Update thread(17)]: mdplug: FreeAllChannels
    2012-08-08 13:49:37.889299 [EPG Update thread(17)]: dvb:pauseGraph filterstate already paused, returning.
    2012-08-08 13:49:38.010306 [(18)]: dvb: LockInOnSignal ok
    2012-08-08 13:49:38.010306 [(18)]: FreeSubChannel MD: tried to free non existing sub channel : 0
    2012-08-08 13:49:38.010306 [(18)]: tvcard:FreeSubChannel: subchannels count 0 subch#0
    2012-08-08 13:49:38.011306 [(18)]: tvcard:FreeSubChannel :0 - sub channel not found
    2012-08-08 13:49:38.011306 [(18)]: tvcard:FreeSubChannel : no subchannels present, pausing graph
    2012-08-08 13:49:38.011306 [(18)]: dvb:pauseGraph called
    2012-08-08 13:49:38.011306 [(18)]: tvcard:FreeAllSubChannels
    2012-08-08 13:49:38.011306 [(18)]: mdplug: FreeAllChannels
    2012-08-08 13:49:38.012306 [(18)]: dvb:pauseGraph filterstate already paused, returning.
    2012-08-08 13:49:38.016306 [(18)]: card2:htpc2 2 -1
    2012-08-08 13:49:38.016306 [(18)]: CardReservation.RemoveTuneTicket: removed reservation with id=2, tuningdetails=DVBS:tv:BSkyB BBC 1 E Mids Freq:10788000 ONID:2 TSID:2046 SID:10305 PMT:0x104 FTA:True LCN:101 SymbolRate:22000 Modulation:ModNotSet Polarisation:LinearV InnerFecRate:Rate5_6 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
    2012-08-08 13:49:38.016306 [(18)]: card: SignalTuneEvent card: 2 / subch: 0
    2012-08-08 13:49:38.016306 [(18)]: Controller: htpc2 2 -1
    2012-08-08 13:49:38.017306 [(18)]: Controller: Timeshifting failed, lets try next available card.
    2012-08-08 13:49:38.018307 [(18)]: CardReservationBase: tvcard=3, user=htpc2, dbChannel=2670, ticket=3, tunestate=Tuning, stopstate=Idle
    2012-08-08 13:49:38.019307 [(18)]: card: CardTune 3 BBC 1 E Mids htpc2:3:-1
    2012-08-08 13:49:38.019307 [(18)]: card: Tune on card 3 to subchannel BBC 1 E Mids[/collapse]

    So it looks like what happened is that TV Server chose a tuner to use to tune a channel. It could see that tuner was being used to grab EPG, so it stopped the EPG grabbing and proceeded to tune with it. Half way through tuning, we suddenly see that the EPG grabber comes back and says "I've got data, do you want it!". This is strange considering that EPG grabbing should have been aborted. The EPG grabber stuffs up the tuning process because it frees the "subchannel" that is being used for the tuning process.

    @miroslav22: I'm not sure if this issue is specific to your branch of the code, but I've never seen this happen in other logs. Potential bug?

    In any case, this does not appear to be related to the problem that was previously seen...

    mm
     

    Jay_UK

    Test Group
  • Team MediaPortal
  • October 6, 2009
    1,781
    283
    Derby
    Home Country
    United Kingdom United Kingdom
    Hi there,

    Thanks for looking into this... So maybe I have two issues....or two one-off issues that might not happen again.... I will keep a close eye on things a little further...

    Miroslav...it would be good if you give your code a quick once over? :D

    J.
     

    Benoire

    MP Donator
  • Premium Supporter
  • March 17, 2012
    679
    161
    45
    Auckland
    Home Country
    New Zealand New Zealand
    Hey Guys,

    I've finally got the whole EPG thing working with SKY NZ by changing the details of the EPG. It is now pulling the full sky EPG including the HD chanenls (not just now/next!) The issue I now have is that all the channels have a preceeding [[00]] or similar in front of them... see attached pic!

    EPG_issues.jpg

    What is causing this? I'm really happy to not have to combine channels to get the full EPG, but no doubt this will confuse the partner!

    Cheers,

    Chris
     

    Jay_UK

    Test Group
  • Team MediaPortal
  • October 6, 2009
    1,781
    283
    Derby
    Home Country
    United Kingdom United Kingdom
    Hi there,

    What skin are you using?

    Does it support genres/categories??

    J.
     
    Last edited:

    Benoire

    MP Donator
  • Premium Supporter
  • March 17, 2012
    679
    161
    45
    Auckland
    Home Country
    New Zealand New Zealand
    Hey Jay,

    That's the strange thing, as far as I can tell using EPGCollector with OpenTV or EIT I do not see these preceeding characters... which is why it confuses me!
     
    Status
    Not open for further replies.

    Users who are viewing this thread

    Top Bottom