Stuttering in scheduled recordings unless client window is open (TSWriter Continuity error) (1 Viewer)

Kent Ohlsson

Portal Member
March 14, 2012
39
0
Varberg
Home Country
Sweden Sweden
Since these PCs seem to be basically a laptop in a box, it wouldn't be that surprising that there are power saving 'features' which you can't turn off....

There might be, there are tons of settings that can be made in ASRock UEFI Setup Utility. However since I'm not sure about what I'm doing, I haven't tried to change everything, just a few of the settings, see previous posts. Here are some screenshots who might be informative to someone more experienced.

IMG_4316.jpgIMG_4317.jpgIMG_4318.jpgIMG_4319.jpgIMG_4320.jpgIMG_4321.jpgIMG_4322.jpgIMG_4323.jpgIMG_4324.jpgIMG_4325.jpgIMG_4326.jpg IMG_4316.jpgIMG_4317.jpg
 

Kent Ohlsson

Portal Member
March 14, 2012
39
0
Varberg
Home Country
Sweden Sweden
Just for the record and maybe useful information for someone who's thinking of buying a new ASRock computer...

ASRock Technical Support Division didn't bother to reply to my support request of March 25.
Maybe support requests are automatically redirected to /dev/null
 

Jay_UK

Test Group
  • Team MediaPortal
  • October 6, 2009
    1,781
    283
    Derby
    Home Country
    United Kingdom United Kingdom
    Hi there,

    Probably repeating everyone else's post... go through the bios and disable/fix the obvious speed/power management settings - I can see a few obvious ones (which I'm sure you have already tried)

    Have you tried the using something like the "throttlestop" utility?

    J.
     

    Kent Ohlsson

    Portal Member
    March 14, 2012
    39
    0
    Varberg
    Home Country
    Sweden Sweden
    Addition to the above:

    Look at the timings in the tswriter log - it does look like the system is more slugglish where the failed recording is. It takes over 1.8 seconds here from the graph starting to the recording starting (compared to just over 1 second for the clean recording)

    We'd need a log with a few more failed/successful recordings to ascertain properly if you could maybe provide one?

    I've created a new set of log files.

    I did this:

    • Started MP Client normally (not in debug mode)
    • Closed VLC Media player (VLC normally running minimized to tray to prevent stuttering)
    • Initiated a recording
    • Closed the client (Now there should be stuttering in the current recording, tswriter complaining)
    • After a while started VLC again minimized
    • Waited yet another while and started the MP client to cancel the recording
    • closed MP client
    • Started MP client in debug mode to generate the zip file for logs
     

    Kent Ohlsson

    Portal Member
    March 14, 2012
    39
    0
    Varberg
    Home Country
    Sweden Sweden
    Hi there,

    Probably repeating everyone else's post... go through the bios and disable/fix the obvious speed/power management settings - I can see a few obvious ones (which I'm sure you have already tried)

    Have you tried the using something like the "throttlestop" utility?

    J.

    I can try harder. I will go through some more BIOS but not today.

    Personally I already have the cure for my problems. (Running VLC minimized to tray when windows starts) It should be nice though to find the cause of the problems because it's my believe that I'm certainly not alone to have them. I believe most people (with affected systems of course) make recordings while the MP client is active, hence they will never notice it. I also believe there are some people just giving up, maybe trying some other software (which is sad) or just accepts the fact it's not working. It's probably not a problem with MP, I don't believe that but maybe it's a problem that MP could deal with (take care of) and prevent the suspected power saving functions to occur which potentially causes problems for users of MP :) Am I right in my thinking here?
     

    Paranoid Delusion

    Moderation Manager
  • Premium Supporter
  • June 13, 2005
    13,062
    2,978
    Cheshire
    Home Country
    United Kingdom United Kingdom
    it's a problem that MP could deal with (take care of) and prevent the suspected power saving functions to occur which potentially causes problems for users of MP :) Am I right in my thinking here?

    Hi Kent, the problem seems to be unique, that's why we are all repeating ourselves as to why this is happening.

    Anyway only 1 change I can see required to get the best from your setup from the pictures you posted, that would be restart pc on ac power loss, nothing else seems even remotely relevant.
     

    melstig

    Portal Pro
    July 16, 2006
    129
    12
    Umea
    Home Country
    Sweden Sweden
    Hi,
    I did not realize that my system spec was gone since the merge to the new forum, sorry for that. :)

    I will try to find the time during eastern to see if the problems are similar on my system.
     

    Kent Ohlsson

    Portal Member
    March 14, 2012
    39
    0
    Varberg
    Home Country
    Sweden Sweden
    OK, thanks again everyone for helping. Let's hope that this is a very unique problem as Ray suggests. From what I've understood the stuttering occurs because of some aggressive, unidentified power saving functions that's specific on my hardware platform/combination of hardware.

    I expect that by some time that more people experiencing the same problem will find this thread and can contribute with reports so that the exact cause of the problem will be revealed.

    Happy Easter holidays everyone! :)
     

    melstig

    Portal Pro
    July 16, 2006
    129
    12
    Umea
    Home Country
    Sweden Sweden
    I finally did a recordning without the MP Client running, sorry for the delay. I could not see any difference with the client running or not. I upgraded MP to the latest version prior to the recording.
     

    arion_p

    Retired Team Member
  • Premium Supporter
  • February 7, 2007
    3,373
    1,626
    Athens
    Home Country
    Greece Greece
    Intel SpeedStep will definitely cause issues in TVServer. It will lower the CPU frequency depending on CPU usage. But it has some hysteresis which is enough to cause the discontinuities. In the BIOS setup screenshots you posted SpeedStep is enabled.

    IIRC CPU-Z will show you the actual CPU frequency in realtime. You can use that as a monitor, to see if that is your issue.
     

    Users who are viewing this thread

    Top Bottom