TVServer service crashes on analog tuning with Hauppauge HVR-2200 (1 Viewer)

janm

Portal Member
July 19, 2008
18
1
Home Country
Denmark Denmark
Hmmm. I tried disabling the digital tuners in the TV-Server Configuration, but it still crashes when I try to scan...
 

hassegubben

Portal Pro
November 25, 2006
163
2
57
Uppsala
Home Country
Sweden Sweden
I have successfully recorded two analog channels simultaneously with my HVR-2200. Playback is OK. I made two hybrid groups, each with one of the analog tuners. I never added the DVB-T tuners to the groups. They were enabled though. Hope this helps.

TV-Server Version: MP 1.0 RC2
MediaPortal Version: MP 1.0 RC2
MediaPortal Skin: Blue two wide
Windows Version: Win XP SP3
CPU Type: Intel Q9450 2,66GHz
HDD: Seagate Barracuda 7200.9 500 GB IDE, Samsung T166 500GB SataII
Memory: Corsair XMS2 DHX 4GB
Motherboard: Gigabyte GA-X48-DQ6
Video Card: Sapphire Radeon HD 3870 Ultimate
Video Card Driver: Catalyst 8.5
Sound Card: Realtek ALC889
Sound Card AC3: MB inbuilt optical out
Sound Card Driver: Realtek HD Audio v1.87
1. TV Card: Hauppauge PVRUSB2 MCE
1. TV Card Type: Analog
1. TV Card Driver: WinTV 4.4
2. TV Card: HVR-2200
2. TV Card Type: Analog, dual tuner
2. TV Card Driver: WinTV 4.4
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
h.264 Video Codec: FFDshow
Satelite/CableTV Provider: cable/COMHEM
HTPC Case: Antec P182B
Cooling: Noctua NH-U12P
Power Supply: Corsair HX620
Remote: Microsoft Remote Keyboard & Remote
TV: Panasonic PV60 plasma
TV - HTPC Connection: VGA
 

janm

Portal Member
July 19, 2008
18
1
Home Country
Denmark Denmark
I did some more testing and here are the results:
Switched analogue cards around so they went into other hybrid groups: Crash when pressing scan.
Had only analog cards in hybrid groups (1 card in each group - digital cards not in groups): Crash when pressing scan.
Had no hybrid groups at all: Crash when leaving tuner tab - ie. visiting either tuner tabs, not pressing any buttons at all, leaving tuner tab.
Went back to original setting with digital + analog tuner in each hybrid group, then just for fun tried scanning for channels on analog card 2 (always used card 1 for tests), and it still crashed, but this time, the log had a little more info than it had before...
Posting relevant log snippet here:

2008-07-21 20:24:53.811000 [12]: card: Tune 4 to
2008-07-21 20:24:53.813000 [12]: card: user: Jan-PC:4:-1 tune tv: Freq:0 Channel:4 Country:The Netherlands Tuner:Cable Video:Tuner
2008-07-21 20:24:53.835000 [12]: analog: Tune:tv: Freq:0 Channel:4 Country:The Netherlands Tuner:Cable Video:Tuner
2008-07-21 20:24:53.857000 [12]: analog: build graph
2008-07-21 20:24:53.865000 [12]: analog: AddTvTunerFilter Hauppauge WinTV-7164 Analog TV Tuner
2008-07-21 20:24:53.914000 [12]: analog: AddCrossBarFilter try:Hauppauge WinTV-7164 Analog Xbar 0
2008-07-21 20:24:53.924000 [12]: analog: PinDest:name:0: Video Tuner In [6/1] Direction:Input Connected:False
2008-07-21 20:24:53.925000 [12]: analog: pinSource 0:name:Analog Video [6/1] Direction:Output Connected:False
2008-07-21 20:24:53.940000 [12]: analog: pins connected
2008-07-21 20:24:53.940000 [12]: analog: AddCrossBarFilter succeeded
2008-07-21 20:24:53.951000 [12]: analog: AddTvAudioFilter try:Hauppauge WinTV-7164 Analog TV Audio 0
2008-07-21 20:24:53.974000 [12]: analog: PinDest:name:TVAudio In [5/1] Direction:Input Connected:False
2008-07-21 20:24:53.975000 [12]: analog: pinSource 0:name:Analog Video [7/1] Direction:Output Connected:True
2008-07-21 20:24:53.975000 [12]: analog: skipping pin
2008-07-21 20:24:53.976000 [12]: analog: pinSource 1:name:Analog Audio [7/1] Direction:Output Connected:False
2008-07-21 20:24:53.977000 [12]: analog: pins connected
2008-07-21 20:24:53.992000 [12]: analog: AddTvAudioFilter succeeded:Hauppauge WinTV-7164 Analog TV Audio
2008-07-21 20:24:54.114000 [12]: analog: AddTvCaptureFilter try: 0
2008-07-21 20:24:54.119000 [12]: analog: AddTvCaptureFilter try: 1
2008-07-21 20:24:54.121000 [12]: analog: AddTvCaptureFilter try:Line in at rear panel (Blue) 2
2008-07-21 20:24:54.233000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.234000 [12]: analog: AddTvCaptureFilter try:Line in at rear panel (black) 3
2008-07-21 20:24:54.295000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.296000 [12]: analog: AddTvCaptureFilter try:Line in at rear panel (Grey) 4
2008-07-21 20:24:54.358000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.358000 [12]: analog: AddTvCaptureFilter try:Line in at rear panel (Green) 5
2008-07-21 20:24:54.419000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.420000 [12]: analog: AddTvCaptureFilter try:Realtek HD Digital input 6
2008-07-21 20:24:54.501000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.502000 [12]: analog: AddTvCaptureFilter try:Line in at rear panel (Orange) 7
2008-07-21 20:24:54.564000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.565000 [12]: analog: AddTvCaptureFilter try:Mic in at rear panel (Pink) 8
2008-07-21 20:24:54.626000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.627000 [12]: analog: AddTvCaptureFilter try:Line in at front panel (Green) 9
2008-07-21 20:24:54.689000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.690000 [12]: analog: AddTvCaptureFilter try:Mic in at front panel (Pink) 10
2008-07-21 20:24:54.753000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.754000 [12]: analog: AddTvCaptureFilter try:Hauppauge WinTV-7164 Analog Capture 11
2008-07-21 20:24:54.925000 [12]: analog: AddTvCaptureFilter failed to connect to crossbar
2008-07-21 20:24:54.927000 [12]: analog: AddTvCaptureFilter try:Hauppauge WinTV-7164 Analog Capture 12
2008-07-21 20:24:54.936000 [12]: analog: AddTvCaptureFilter connected to crossbar successfully
2008-07-21 20:24:54.941000 [12]: analog: FindCapturePin on capture filter
2008-07-21 20:24:54.956000 [12]: analog: AddTvEncoderFilter
2008-07-21 20:24:55.034000 [12]: analog: AddTvEncoderFilter found:22 encoders
2008-07-21 20:24:55.035000 [12]: analog: try encoder:Hauppauge WinTV-7164 AAC AES Encoder 0
2008-07-21 20:24:55.060000 [12]: analog: filter Hauppauge WinTV-7164 AAC AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.061000 [12]: analog: try encoder:Hauppauge WinTV-7164 AAC AES Encoder 1
2008-07-21 20:24:55.066000 [12]: analog: filter Hauppauge WinTV-7164 AAC AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.067000 [12]: analog: try encoder:Hauppauge WinTV-7164 MP3 AES Encoder 2
2008-07-21 20:24:55.072000 [12]: analog: filter Hauppauge WinTV-7164 MP3 AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.072000 [12]: analog: try encoder:Hauppauge WinTV-7164 MP3 AES Encoder 3
2008-07-21 20:24:55.077000 [12]: analog: filter Hauppauge WinTV-7164 MP3 AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.078000 [12]: analog: try encoder:Hauppauge WinTV-7164 AVI Encoder/Mux 4
2008-07-21 20:24:55.085000 [12]: analog: filter Hauppauge WinTV-7164 AVI Encoder/Mux does not have mpeg-2 ps output
2008-07-21 20:24:55.085000 [12]: analog: try encoder:Hauppauge WinTV-7164 AVI Encoder/Mux 5
2008-07-21 20:24:55.092000 [12]: analog: filter Hauppauge WinTV-7164 AVI Encoder/Mux does not have mpeg-2 ps output
2008-07-21 20:24:55.093000 [12]: analog: try encoder:Hauppauge WinTV-7164 ASF Encoder/Mux 6
2008-07-21 20:24:55.110000 [12]: analog: filter Hauppauge WinTV-7164 ASF Encoder/Mux does not have mpeg-2 ps output
2008-07-21 20:24:55.111000 [12]: analog: try encoder:Hauppauge WinTV-7164 ASF Encoder/Mux 7
2008-07-21 20:24:55.125000 [12]: analog: filter Hauppauge WinTV-7164 ASF Encoder/Mux does not have mpeg-2 ps output
2008-07-21 20:24:55.126000 [12]: analog: try encoder:Hauppauge WinTV-7164 LPCM AES Encoder 8
2008-07-21 20:24:55.131000 [12]: analog: filter Hauppauge WinTV-7164 LPCM AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.132000 [12]: analog: try encoder:Hauppauge WinTV-7164 LPCM AES Encoder 9
2008-07-21 20:24:55.137000 [12]: analog: filter Hauppauge WinTV-7164 LPCM AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.138000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG2 VES Encoder 10
2008-07-21 20:24:55.143000 [12]: analog: filter Hauppauge WinTV-7164 MPEG2 VES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.144000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG2 VES Encoder 11
2008-07-21 20:24:55.150000 [12]: analog: filter Hauppauge WinTV-7164 MPEG2 VES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.151000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG1 VES Encoder 12
2008-07-21 20:24:55.162000 [12]: analog: filter Hauppauge WinTV-7164 MPEG1 VES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.163000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG1 VES Encoder 13
2008-07-21 20:24:55.169000 [12]: analog: filter Hauppauge WinTV-7164 MPEG1 VES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.170000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG1 L2 AES Encoder 14
2008-07-21 20:24:55.176000 [12]: analog: filter Hauppauge WinTV-7164 MPEG1 L2 AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.176000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG1 L2 AES Encoder 15
2008-07-21 20:24:55.181000 [12]: analog: filter Hauppauge WinTV-7164 MPEG1 L2 AES Encoder does not have mpeg-2 ps output
2008-07-21 20:24:55.182000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG2 TS Encoder/Mux 16
2008-07-21 20:24:55.235000 [12]: analog: filter Hauppauge WinTV-7164 MPEG2 TS Encoder/Mux does not have mpeg-2 ps output
2008-07-21 20:24:55.236000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG2 TS Encoder/Mux 17
2008-07-21 20:24:55.270000 [12]: analog: filter Hauppauge WinTV-7164 MPEG2 TS Encoder/Mux does not have mpeg-2 ps output
2008-07-21 20:24:55.271000 [12]: analog: try encoder:Hauppauge WinTV-7164 MPEG2 PS Encoder/Mux 18
2008-07-21 20:24:55.282000 [12]: analog: encoder in-pin1:name:I2S Audio [9/1] Direction:Input Connected:False
2008-07-21 20:24:55.282000 [12]: analog: encoder in-pin2:name:Analog ITU Video [9/1] Direction:Input Connected:False
2008-07-21 20:24:55.287000 [12]: analog: ConnectEncoderFilter video:True audio:True
2008-07-21 20:24:55.288000 [12]: analog: found pin#0 name:I2S Audio [9/2] Direction:Input Connected:False
2008-07-21 20:24:55.289000 [12]: analog: found pin#1 name:Analog ITU Video [9/2] Direction:Input Connected:False
2008-07-21 20:24:55.290000 [12]: analog: pinsAvailable on capture filter:5
2008-07-21 20:24:55.290000 [12]: analog: capture pin:0 name:I2S Audio [15/1] Direction:Output Connected:False
2008-07-21 20:24:55.387000 [12]: analog: capture pin:1 name:Analog ITU Video [16/1] Direction:Output Connected:False

Any ideas?
 

misterd

Retired Team Member
  • Premium Supporter
  • April 4, 2006
    1,597
    314
    Home Country
    Germany Germany
    I have no idea what is causing those crashes as there are still no helpful error messages :(

    MisterD
     

    janm

    Portal Member
    July 19, 2008
    18
    1
    Home Country
    Denmark Denmark
    Sorry for my late reply, have had some computer problem. Short story: Computer blew up! Slightly longer version: In the process of identifying and replacing the dead hardware.

    Is there any way for me to extract a call stack from TVService so we can get closer to identifying the source of the crashes?
     

    janm

    Portal Member
    July 19, 2008
    18
    1
    Home Country
    Denmark Denmark
    Bump. Any idea on how I can get closer to the source of the crashes? Can I run the service with some special parameters to make it give more detailed logs, or maybe I can get a special debug version of the exe I can run on my system?
     

    misterd

    Retired Team Member
  • Premium Supporter
  • April 4, 2006
    1,597
    314
    Home Country
    Germany Germany
    There are no switches which could increase the logging. Perhaps it could help if you would attach all logs from TvServer. You can use therefor MediaPortal Logs Collector, which collects all logs of MP and the TvServer.
    Unfortunately I'm currently trying to fix a major issue for analog tv which will take some time.

    MisterD
     

    janm

    Portal Member
    July 19, 2008
    18
    1
    Home Country
    Denmark Denmark
    I attached the logs in the OP. I can attach them again if you want, but I doubt there will be any new info in these logs.
    Basically the logs stop at the point where the server is contacting the analog tuner and nothing else show up until i restart the service.

    Hmmm. This fix you are working on for analog TV, is that related to my problems?

    PS: Grats on 1000 posts :)
     

    kiwijunglist

    Super Moderator
  • Team MediaPortal
  • June 10, 2008
    6,746
    1,751
    New Zealand
    Home Country
    New Zealand New Zealand
    I think i know when the error occurs. The error occurs when a hybrid switches back and forth from digital to analog. I have ran MP RC2 with TV Server config open and verified that the crash only occurs in this situtation.

    If you setup TV Server so that 1x hybrid is digital only and 1x hybrid is analog only then you don't get any crashes.

    If you setup the hvr2200 as a hybrid then make hybrid 1 preferred for digital and hybrid 2 preferred for analog, then it only crashes if you record digital tv, and then switch back and forth between analog and digital channels using the 2nd hybrid. I get the error No Audio/Video detected.

    MP RC2 + SVN 20227 / VISTA 32 SP1 / HVR 2200
     

    Users who are viewing this thread

    Top Bottom