Ok, sorry I did know that.
For info, seem to have got round it by loading in 1.0.1 then scanning. Then updating to 1.0.2 but still on first couple of hours...... defintely better though.
Unable to start graph / start timeshifting... Timed out waiting for PMT (1 Viewer)
- Thread starter nappomat
- Start date
Ok, sorry I did know that.
For info, seem to have got round it by loading in 1.0.1 then scanning. Then updating to 1.0.2 but still on first couple of hours...... defintely better though.
Finland
It seems to be that this getting worse all the time. Most of those new topics are related to this same issue. For me it's a good news because I would like to get this fixed asap =) I have tested now all posible scenarios (update, clean install, different versions etc) Only thing what I haven't done is Vista re-installation...
Code:
2009-06-03 14:03:57.602000 [10]: card: Tune 1 to Test 1
2009-06-03 14:03:57.603000 [10]: card: user: epg:1:-1 tune DVBC:tv:Ziggo Test 1 Freq:717000 ONID:1000 TSID:26 SID:261 PMT:0x2D FTA:False LCN:10000 SymbolRate:6875 Modulation:Mod64Qam
2009-06-03 14:03:57.645000 [10]: dvbc: Tune:DVBC:tv:Ziggo Test 1 Freq:717000 ONID:1000 TSID:26 SID:261 PMT:0x2D FTA:False LCN:10000 SymbolRate:6875 Modulation:Mod64Qam
2009-06-03 14:03:57.647000 [10]: dvb:Submiting tunerequest Channel:Test 1 subChannel:-1
2009-06-03 14:03:57.648000 [10]: dvb:Getting new subchannel
2009-06-03 14:03:57.649000 [10]: dvb:GetNewSubChannel:0 #0
2009-06-03 14:03:57.651000 [10]: TvDvbChannel ctor new subchIndex:0
2009-06-03 14:03:57.652000 [10]: dvb:Submit tunerequest size:1 new:0
2009-06-03 14:03:57.652000 [10]: subch:0 OnBeforeTune
2009-06-03 14:03:57.654000 [10]: dvb:Submit tunerequest calling put_TuneRequest
2009-06-03 14:03:58.469000 [10]: dvb:Submit tunerequest done calling put_TuneRequest
2009-06-03 14:03:58.470000 [10]: subch:0 OnAfterTune
2009-06-03 14:03:58.473000 [10]: dvb: LockedInOnSignal waiting 20ms
2009-06-03 14:03:58.541000 [10]: dvb: LockedInOnSignal ok
2009-06-03 14:03:58.543000 [10]: subch:0 OnGraphStart
2009-06-03 14:03:58.544000 [10]: subch:0 SetupPmtGrabber:pid 2D sid:105
2009-06-03 14:03:58.545000 [10]: subch:0 set pmt grabber pmt:2D sid:105
2009-06-03 14:03:58.546000 [10]: WaitForPMT: Waiting for PMT.
2009-06-03 14:04:00.298000 [5]: Controller: StartTimeShifting RTL 7 120
2009-06-03 14:04:00.300000 [5]: user:epg remove
2009-06-03 14:04:00.300000 [5]: tvcard:FreeSubChannel: subchannels count 1 subch#-1 keep graph=False
2009-06-03 14:04:00.300000 [5]: tvcard:FreeSubChannel :-1 - sub channel not found
2009-06-03 14:04:00.301000 [5]: Controller: find free card for channel RTL 7
2009-06-03 14:04:00.303000 [5]: Controller: got 1 tuning details for RTL 7
2009-06-03 14:04:00.303000 [5]: Controller: channel #1 DVBC:tv:Ziggo RTL 7 Freq:831500 ONID:1000 TSID:11 SID:11006 PMT:0x640 FTA:False LCN:10000 SymbolRate:6875 Modulation:Mod64Qam
2009-06-03 14:04:00.309000 [5]: Controller: card:1 type:DvbC is available priority:2 #users:0 same transponder:False
2009-06-03 14:04:00.312000 [5]: Controller: card:2 type:RadioWebStream cannot tune to channel
2009-06-03 14:04:00.312000 [5]: Controller: found 1 available
2009-06-03 14:04:00.314000 [5]: card: CardTune 1 RTL 7 htpc:1:-1
2009-06-03 14:04:00.315000 [5]: card: Tune 1 to RTL 7
2009-06-03 14:04:08.547000 [10]: WaitForPMT: Timed out waiting for PMT after 10,001 seconds. Increase the PMT timeout value?
2009-06-03 14:04:08.569000 [10]: card: Tuner locked: Trueit appears i have the same issue, this is from my tv.log from tv server 1.0.2. Using a terratec cinergy dvb-c card. It doesn't happen on all channels dough but a lot of them don't work.
I noticed it was always the same channel that doesn't work. So i uninstalled tv server, deleted all the channels and reinstalled tv server, new channel scan and now these channels work .
And now the bad news.
Some other channels don't work. And always the same channels after a rescan.
Another thing i noticed when scanning, when you do a complete new can it shouldn't updated channels. (because you can't update channels on a first scan, they are all new).
Example
1. 6 new 0 updates
2. 12 new 0 updates
3. 8 new 6 updates <- why update
So my guess is that it up updates a previously found channel to a wrong transponder. ( don't know how to explain but thing you get the point ).
.And now the bad news.
Some other channels don't work
. And always the same channels after a rescan. Another thing i noticed when scanning, when you do a complete new can it shouldn't updated channels. (because you can't update channels on a first scan, they are all new).
Example
1. 6 new 0 updates
2. 12 new 0 updates
3. 8 new 6 updates <- why update
So my guess is that it up updates a previously found channel to a wrong transponder. ( don't know how to explain but thing you get the point ).
Glad I found this thread - didn't find it before I reported a similar set of symptoms in another thread.
Typically, I see "cannot start stream" or similar error message from MyTV; For The Record also gives errors when I try to watch live TV. I have also seen fairly random effects like not being able to tune a channel, but trying to turn on TV some time later works. What I have not checked is whether I was trying the same channel each time and it could be that all except a few channels were not working; sometimes I struck lucky and picked a channel that was on the "working" MUX (DVB-T here). Sometimes MP hangs altogether and needs killing via Task Manager.
Couple of other effects that might be related - sometimes I can try selecting a channel and it actually ends up with a different one (but have not analysed whether what is shown always comes from the same MUX), and I cannot scan any channels on one of my 6 local MUXes, although a DVB-T TV fed from the same antenna distribution amplifier works fine. I do find all channels on the other 5 MUXes.
I am currently using 1.0.2, but seen similar symptoms with 1.0.1; running XP sp3. Would dearly like to get a copy of 1.0.0, tune with that, and then upgrade. Maybe that's why only a relatively small number of users are reporting problems? All the "old-timers" are running upgrades from an earlier version and it's only the new boys who are getting caught?
Typically, I see "cannot start stream" or similar error message from MyTV; For The Record also gives errors when I try to watch live TV. I have also seen fairly random effects like not being able to tune a channel, but trying to turn on TV some time later works. What I have not checked is whether I was trying the same channel each time and it could be that all except a few channels were not working; sometimes I struck lucky and picked a channel that was on the "working" MUX (DVB-T here). Sometimes MP hangs altogether and needs killing via Task Manager.
Couple of other effects that might be related - sometimes I can try selecting a channel and it actually ends up with a different one (but have not analysed whether what is shown always comes from the same MUX), and I cannot scan any channels on one of my 6 local MUXes, although a DVB-T TV fed from the same antenna distribution amplifier works fine. I do find all channels on the other 5 MUXes.
I am currently using 1.0.2, but seen similar symptoms with 1.0.1; running XP sp3. Would dearly like to get a copy of 1.0.0, tune with that, and then upgrade. Maybe that's why only a relatively small number of users are reporting problems? All the "old-timers" are running upgrades from an earlier version and it's only the new boys who are getting caught?
I would like to avice everyone to test MediaPortal 1.0.2 without any community plugins or skins.
If it comes down to a communityplugin which "breaks" you setup, then please refer to the related developer for support.
If it comes down to a communityplugin which "breaks" you setup, then please refer to the related developer for support.
Hi,
I'm having PMT timeouts now and then, with a Terratec Cinergy C (with CI interface + Alphacrypt). I'm very willing to solve this problem, because it's the only thing that makes the TV part not completely woman-proof
I've only got IRSS as plugin.
If you guys need logs or something, I can post them later. However, I'm getting the same kind of PMT timeout errors (with debug mode enabled).
I'm having PMT timeouts now and then, with a Terratec Cinergy C (with CI interface + Alphacrypt). I'm very willing to solve this problem, because it's the only thing that makes the TV part not completely woman-proof
I've only got IRSS as plugin.
If you guys need logs or something, I can post them later. However, I'm getting the same kind of PMT timeout errors (with debug mode enabled).
Using MediaPortal 1.0.2 "Vanilla" also creates the Graph errors. As little as possible plugins enabled and no additional plugins installed. Blue3wide skin used.
I guess my logs did not give any relevant information?
I guess my logs did not give any relevant information?