Using video input from Hauppauge PVR150 (1 Viewer)
- Thread starter stretcho
- Start date
Germany
- go to Television / TV Channels
- create a channel give it a name
- go to the most right tab "external"
- select received by external settop box
- select input SVHS or RGB (not sure right now which one...)
- if you use a IR blaster specifiy the channel number of the external settop box
Basically you have two possibilities for channel switching. Using the IR Blaster. Then you can setup as every channel in MP and you can switch the external channel comfortably with MP's remote.
Or you create only one channel for the settop box and you change the channels with the external boxS remote
thanks+regards
WeWe
- create a channel give it a name
- go to the most right tab "external"
- select received by external settop box
- select input SVHS or RGB (not sure right now which one...)
- if you use a IR blaster specifiy the channel number of the external settop box
Basically you have two possibilities for channel switching. Using the IR Blaster. Then you can setup as every channel in MP and you can switch the external channel comfortably with MP's remote.
Or you create only one channel for the settop box and you change the channels with the external boxS remote
thanks+regards
WeWe
Users who are viewing this thread
Similar threads
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format". Not sure what that means, but to test that, I downloaded a copy of Capture4Me, and indeed, it switches LNBs without any issues with minimal configuration (just set DiSEqC to 1.x A/B/C/D and select the...
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format"...
Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup...
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine.
Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC?
PS: You can also try to make short record
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...
I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...
Windows Notepad works fine nothing special involved.
Windows Notepad works fine nothing special involved.
Hello and good morning,
atm I´m gonna try to install my new MP2 Server with a hybrid solution DVB-T2 and MagentaTV.
For DVB-T2 I...
According to Wikipedia, Windows only uses code pages other than UTF-8 to support legacy (mostly 32 bit) applications and supports two code pages in addition to UTF-8 (OEM and ANSI). According to Microsoft, UTF-8 has been the preferred character set since 2019. If TV Server (or its import routine) were using UTF-8, then umlauts...
According to Wikipedia, Windows only uses code pages other than UTF-8 to support legacy (mostly 32 bit) applications and supports...
Because I have around 200 TV channels and more than a dozen groups, I tried to import the TV channel groups from an old export.xml...
There seems to be an ongoing problem that some users have when trying to install MP 1.36. I regret that I do not know the cause of this problem, and so cannot suggest a solution. However, I can suggest a workaround that (hopefully) will work for you. The workaround is to:
Completely uninstall MP, MySQL, and MariaDB.
Perform a...
There seems to be an ongoing problem that some users have when trying to install MP 1.36. I regret that I do not know the cause of...
MediaPortal was working without any issue until 24 hours ago. Then it started hanging; the disk it was installed on was quite full...
