@Sebastiii this post will have the logs I mentioned on IRC
Okay, first off this HTPC (main HTPC) is about 3 years old and has not changed hardware configuration since day 1. AMD A6-6400, 8GB RAM on board HDMI and a 128GB SSD.
First it ran Win 7, then it ran Win 8, only to be upgraded to 8.1 shortly there after. After about a year I installed Win 10 Preview, and then finally upgrading to Win 10 retail about 2 weeks ago.
While running Win 7 had MP 1.9 and 1.10 running just fine. While running 8/8.1 it had 1.10 and 1.11 running just fine. While running Win 10 Preview it had MP 1.11 and 1.12 Pre-Release running just fine.
Two weeks ago I wipe the drive and install a fresh copy of Windows 10 and MP 1.13. I did the same exact thing with my other 3 HTPCs, also running AMD APUs (A6-5400, not the 6400) with on board HDMI and 8GB RAM. The other HTPCs went from Win 8 with MP 1.10 straight to Win 10 with MP 1.13. As those HTPCs are not used by me alone they did not get upgraded and tested out Pre Releases like my main HTPC. The other three follow a "If it's not broke dont fix it" ideology.
I have never used any codecs other than LAV since these have been built. In the last 4 years I have used nothing but LAV. No other codecs have ever been installed on any of these systems not to mention they all got wiped fresh.
While all HTPC are more sluggish than they used to be and are experiencing slight issues that can be moved past, my main HTPC is not so lucky. It is more sluggish than the others, so bad that it takes anywhere from 15-90 seconds to show the list after leaving playback. Does not matter if the list is only 24 episodes in MP-TVSeries or if it is my "All Movies" list of 4,614 movies. The speed is about the same. What worse is that I have to try and play a video multiple times (sometimes once, other times I tried 20 or so times and it never played) always getting a Unable to Play error.
I upgraded to 1.14 Pre and it seemed to get worse.
I uninstalled 1.14 and installed 1.11 and the sluggishness seemed to have all but evaporated, but the not able to play videos problem is still there. Also since I installed 1.11 I no longer have the TV plugin to watch my live TV.
Also, while on 1.14 MP would just end itself. No errors, just a nice shut down of the application.
The logs included are from my main HTPC and the level is set to debug, but I have not found very much useful info in the logs, but to be fair I suck big-time at reading logs.
ANY help in these matters would be greatly appreciated.
Okay, first off this HTPC (main HTPC) is about 3 years old and has not changed hardware configuration since day 1. AMD A6-6400, 8GB RAM on board HDMI and a 128GB SSD.
First it ran Win 7, then it ran Win 8, only to be upgraded to 8.1 shortly there after. After about a year I installed Win 10 Preview, and then finally upgrading to Win 10 retail about 2 weeks ago.
While running Win 7 had MP 1.9 and 1.10 running just fine. While running 8/8.1 it had 1.10 and 1.11 running just fine. While running Win 10 Preview it had MP 1.11 and 1.12 Pre-Release running just fine.
Two weeks ago I wipe the drive and install a fresh copy of Windows 10 and MP 1.13. I did the same exact thing with my other 3 HTPCs, also running AMD APUs (A6-5400, not the 6400) with on board HDMI and 8GB RAM. The other HTPCs went from Win 8 with MP 1.10 straight to Win 10 with MP 1.13. As those HTPCs are not used by me alone they did not get upgraded and tested out Pre Releases like my main HTPC. The other three follow a "If it's not broke dont fix it" ideology.
I have never used any codecs other than LAV since these have been built. In the last 4 years I have used nothing but LAV. No other codecs have ever been installed on any of these systems not to mention they all got wiped fresh.
While all HTPC are more sluggish than they used to be and are experiencing slight issues that can be moved past, my main HTPC is not so lucky. It is more sluggish than the others, so bad that it takes anywhere from 15-90 seconds to show the list after leaving playback. Does not matter if the list is only 24 episodes in MP-TVSeries or if it is my "All Movies" list of 4,614 movies. The speed is about the same. What worse is that I have to try and play a video multiple times (sometimes once, other times I tried 20 or so times and it never played) always getting a Unable to Play error.
I upgraded to 1.14 Pre and it seemed to get worse.
I uninstalled 1.14 and installed 1.11 and the sluggishness seemed to have all but evaporated, but the not able to play videos problem is still there. Also since I installed 1.11 I no longer have the TV plugin to watch my live TV.
Also, while on 1.14 MP would just end itself. No errors, just a nice shut down of the application.
The logs included are from my main HTPC and the level is set to debug, but I have not found very much useful info in the logs, but to be fair I suck big-time at reading logs.
ANY help in these matters would be greatly appreciated.