Video Playback Stuttering (1 Viewer)
- Thread starter igork72
- Start date
- August 9, 2012
- 2,660
- 2,002
- Home Country
-
Germany
OK that would seem to indicate an issue with LAV and or your OS settings as opposed to a specific MP/LAV problem.
@Sebastiii where to go from here?
- Moderator
- #33
Hi 
Yep surely merit is not set correctly at OS level for LAV, but MP should first try to load LAV filter and if it can't be connected, it swith to merit one.
Something is wrong for sure !!
Maybe LAV codec settings are wrong too ?
Hope it help
Yep surely merit is not set correctly at OS level for LAV, but MP should first try to load LAV filter and if it can't be connected, it swith to merit one.
Something is wrong for sure !!
Maybe LAV codec settings are wrong too ?
Hope it help
- August 9, 2012
- 2,660
- 2,002
- Home Country
-
Germany
Just a couple of questions and ideas.
What intel graphics do you have and which version of LAV are you using?
Can you try setting a different hardware decoder in the LAV as shown in the attached screenshot, start with Intel QuickSync but also DXVA2 (copy-back), D3D11 and None with the problem video and let us know the results. Also please try with the VC1 option disabled.
What intel graphics do you have and which version of LAV are you using?
Can you try setting a different hardware decoder in the LAV as shown in the attached screenshot, start with Intel QuickSync but also DXVA2 (copy-back), D3D11 and None with the problem video and let us know the results. Also please try with the VC1 option disabled.
- Moderator
- #38
A bit tricky to see if correct codec are in place, is to use GraphStudioNext
Unpack the zip into a C:\GraphStudioNext
Register "proppage.dll" in an elevated command prompt : regsvr32 "c:\GraphStudioNext\proppage.dll"
Then start MP and try to play a video.
Start GraphStudio and do CTRL+G and connect to MediaPortal (or MPC-HC)
Post result here with MP log too (watchdog)
It should be like this :
Note that it's madVR because i'm using it but it can be EVR
Here we can see that playing a video AVC 1080i...m2ts, we can see that all codec are correctly in place and connected
Unpack the zip into a C:\GraphStudioNext
Register "proppage.dll" in an elevated command prompt : regsvr32 "c:\GraphStudioNext\proppage.dll"
Then start MP and try to play a video.
Start GraphStudio and do CTRL+G and connect to MediaPortal (or MPC-HC)
Post result here with MP log too (watchdog)
It should be like this :
Note that it's madVR because i'm using it but it can be EVR
Here we can see that playing a video AVC 1080i...m2ts, we can see that all codec are correctly in place and connected
- Moderator
- #40
Sorry for the delay !!!
From your log, the sample you are trying to play is 25hz so DRR try to switch to 50hz and it failed :
[2020-06-01 20:18:55,360] [Log ] [SetRefreshRateBasedOnFPS thread] [INFO ] - CycleRefreshRate: unable to change refresh rate 50Hz for monitor 1 for resolution 3840 x 2160
It stays at 24, that can introduce stuttering so it can be an issue too
Can you try to set your display to 50hz (manually from windows) and play the files ? (maybe worth a try to disable internal DRR to avoid eventual changes.)
You graph looks good
From your log, the sample you are trying to play is 25hz so DRR try to switch to 50hz and it failed :
[2020-06-01 20:18:55,360] [Log ] [SetRefreshRateBasedOnFPS thread] [INFO ] - CycleRefreshRate: unable to change refresh rate 50Hz for monitor 1 for resolution 3840 x 2160
It stays at 24, that can introduce stuttering
so it can be an issue tooCan you try to set your display to 50hz (manually from windows) and play the files ? (maybe worth a try to disable internal DRR to avoid eventual changes.)
You graph looks good