Zalman HD135 VFD (VlSys Mplay) (2 Viewers)

OptimusPrime

Portal Pro
November 5, 2007
118
1
48
Ransbach
Home Country
Germany Germany
hi pcwizzul,

deaktivate the external display plugin, delete the externaldisplay.xml in the homepazt of mp,
aktivate the the plugin and config it like the 2 screenshots.

do you see the usb serial converter in your hardware settings? run´s the display correct with mhc?
 

Attachments

  • external pluin 1.jpg
    external pluin 1.jpg
    81.1 KB
  • external pluin 2.jpg
    external pluin 2.jpg
    118.1 KB
  • usb serial converter.jpg
    usb serial converter.jpg
    10.9 KB

pcwizzul

Portal Member
January 25, 2008
22
0
sorry man.....
I'm so dumb!!!
I found out my problem.
I renamed "processplugin.dll" to "processplugin or.dll" and mediaportal was loading both the dlls. Once I renamed the original file "processplugin.dll.backup" everything worked fine. and you know what? it even works on all the pcs that crash with the mhc.
You guys at mediaportal rulez, really! you can make the diplay work while the vlsys team can't. no words!
no, its' not true. still one question!
what about a graphic eq like the one for winamp?
it would be great!
cheers
 

cybrmage

Portal Pro
May 30, 2007
498
86
Home Country
Canada Canada
VL didn´t response to my e-mail :mad:
I hope this didn't surprise you.... NONE of the display manufacturers (with the exception of Matrix Orbital) are any help at all with programming specifics for their devices.

the fan´s go offline if i start mp.
You'll need to post mediaportal logs with Auto fan control turned on, and with manual mode turned on...
Do the fans get shut off if you disable fan control for the driver?
None of your serial port captures showed MHC sending fan control commands... so I don't know it it uses the same commands as the mr300 (that Herr R aus B has).

Here they are. Sorry it took so long
No problem.

WHERE IS CYBRMAGE??? ya still alive, man? :D
I'm still here... I've just been busy with work and other projects... and there has not been a whole lot of activity in here lately...

... i didn´t tryed this yet,
but it should work if you use the winamp plugin und the visualiser-plugin from vl in winamp.

No... It won't work... MediaPortal does not use Winamp for media playback... and the winamp plugin only runs with MHC.

I have all the code needed for Equalizer display (coded for the iMON driver)... but it makes the driver far more complex... I may port it to this driver eventually.... If I get some free time and I'm really bored...

Regards,
CybrMage
 

OptimusPrime

Portal Pro
November 5, 2007
118
1
48
Ransbach
Home Country
Germany Germany
cybermage said:
You'll need to post mediaportal logs with Auto fan control turned on, and with manual mode turned on...
Do the fans get shut off if you disable fan control for the driver?
None of your serial port captures showed MHC sending fan control commands... so I don't know it it uses the same commands as the mr300 (that Herr R aus B has).

Hi Cybr,

here the log´s from auto and manual.

whatever i config in mp, auto,manual or off - if mp starts the fan´s get shut off.

p.s

the next week i will be ofline, cause my job will need me in latvia :)
 

pcwizzul

Portal Member
January 25, 2008
22
0
cybermage is right....
you can't use the winamp plugin for the eq effect.
but I'm sure he would be able to add that part of code to his great driver! ;)
if he has any free time! ;)
you already made a great work with this driver and I couldn't ask for more so thanks for your effort :D
in case you need a bea tester for the equalizer, well let me know and I would be soooo happy.
but isn't there a plugin for mediaportal to do this?
 

Bagal

MP Donator
  • Premium Supporter
  • December 15, 2006
    229
    16
    Home Country
    United Kingdom United Kingdom
    Just thought I'd add my :D for all the hard work on this driver.

    I've been following this thread from the beginning but only got round to installing the driver last night, worked flawlessly first time for me, great job! :cool:
     

    cybrmage

    Portal Pro
    May 30, 2007
    498
    86
    Home Country
    Canada Canada
    The new driver with experimental features is now available... but only in the new stand-alone plugin package... available HERE


    Changes:

    - added Equalizer display
    - display update rate limiting (in case the display can't handle continuous updates)
    - delayed EQ display startup (to allow track info to display before the EQ starts)
    - programmable EQ override (allows periodic track information display while the EQ is functioning)
    - equalizer smoothing​
    - added Advanced display control
    - display shut-off when MediaPortal is idle
    - display shut-off during video playback
    - programmable momentary display turn-on when MediaPortal action received while the display is shut-off​

    These new options must be explicitly enabled in Configuration.

    Regards,
    CybrMage
     

    -Manfred-

    Retired Team Member
  • Premium Supporter
  • May 15, 2007
    728
    343
    Home Country
    Finland Finland
    This new CbrDisplay doesn't start at all due to com port problem. I tried both versions and the result was the same. Logs attached with info tag.

    This will be awesome driver when working!

    Cheers,
    /m
     

    Herr R aus B

    MP Donator
  • Premium Supporter
  • December 22, 2007
    241
    28
    Berlin
    Home Country
    Germany Germany
    The new driver with experimental features is now available... but only in the new stand-alone plugin package... available HERE


    Changes:

    - added Equalizer display
    - display update rate limiting (in case the display can't handle continuous updates)
    - delayed EQ display startup (to allow track info to display before the EQ starts)
    - programmable EQ override (allows periodic track information display while the EQ is functioning)
    - equalizer smoothing​
    - added Advanced display control
    - display shut-off when MediaPortal is idle
    - display shut-off during video playback
    - programmable momentary display turn-on when MediaPortal action received while the display is shut-off​

    These new options must be explicitly enabled in Configuration.

    Regards,
    CybrMage

    oops... things are going on - will be testing the stuff tomorrow (recordings going on at the moment). and btw: thanks for mentioning the little testing i did :)

    i just realized there might still be something missing which is reinitializing the driver rsp. the display when the PC returns from standby. the scenario is, when the PC returns from standby due to some scheduled recording, then the display remains in standby mode and thus, the remote wouldn't work. the work around is to push the PwrOff button of the remote, which then wakes up the display. so the question is, whether the driver gets a signal when the PC goes to or wakes up from standby mode not issued by the remote rsp. the display, but for example by PowerScheduler, which works fine at all. could you then get the display reinitialized, when the PC returns from standby? Do you need a log file for this scenario?

    I will do more testing of the new versions tomorrow :)

    regards

    axel
     

    Users who are viewing this thread

    Top Bottom