IR Server Suite - Version 1.4.2 Test Build 3158/3281 (1 Viewer)

Status
Not open for further replies.

shark147

New Member
January 2, 2008
4
0
Hi, and-81

I certainly wrong to select the correct plugin.

In the files list I select: "Girder Plugin.dll" that is locate in: C:\Program Files\IR Server Suite\IR Server Plugins\

Thanks advance...
 

and-81

Retired Team Member
  • Premium Supporter
  • March 7, 2005
    2,257
    183
    Melbourne
    Home Country
    Australia Australia
    Here's an update for the MCE Transceiver plugin in 1.0.4.1

    Unzip the attachment into the "IR Server Plugins" folder under your IR Server Suite program files folder, overwrite the old MCE transceiver files with these new ones...

    EDIT: You must disable the input service (start menu, run, services.msc, find the input server and stop it) before you can update the files. Thanks to rekenaar for reminding us.

    This should fix the blasting problem several users have noticed. Let me know how you get on.

    shark147: Click Find and then locate the Girder plugin (from your girder install folder) that you'd like to use, not the "Girder Plugin.dll" that is located in the IR Server plugins folder. I'll add better error handling in the next version to prevent errors like this coming up, and I'll try to document the feature better in the future.

    Cheers,
     

    rekenaar

    Retired Team Member
  • Premium Supporter
  • December 17, 2006
    4,421
    805
    Home Country
    South Africa South Africa
    Thank you - it is working again.

    Other users - you need to stop the input service before you can overwrite the files.
     

    petsa

    MP Donator
  • Premium Supporter
  • January 23, 2007
    588
    15
    Stockholm
    Home Country
    Sweden Sweden
    Hi Aaron,

    Great job! My first test this morning was successful and I could learn some IR commands and blast them. It was not 100% reliable but it may very well be me doing a sloppy job when I learnt the IR commands.

    I'll get back to you later when I've done some more tests, but so far so good!

    /Peter
     

    dominique

    Portal Pro
    May 17, 2007
    55
    1
    sdfsdfsdf
    Home Country
    Cameroon Cameroon
    Ir Server install guide?

    Before few days I post my problem with new version Ir server and blasting. After problems with new Ir server I use again one old version and works ok. Now I see probably the solution for blasting problems and I will try again to use new version (input service). But, after all this posts on forum and reading all this, I'm not sure how to install IR server.
    If someone can to write short HOW TO..

    I'm not sure if I must edit some keys in registry.. what I must to do with HID service.. witch driver I must use..
    Before few monath I use MCE replacment plugin, then different version IR server and all this version has own requirements and little changes. Now my HTPC works ok, but I'm not sure the right way to setup all this.. Maybe I do this right, but maybe no.. So If someone can write very short gude only for install IR server. :D
     

    Noonian

    Portal Member
    January 28, 2007
    13
    0
    Home Country
    Sweden Sweden
    Hi Aaron,

    I have similar problems with the MCE tranceiver. After installing your latest patch I got it working with my hifi remote, but I've still got problems with the Sony TV remote. I've attaced log files from when I learned a button using the debug client and then transmitted it back a couple of times to the receiver. Would be interesting to hear what you make out of it.

    Cheers
    Henrik
     

    Olegus

    New Member
    August 28, 2007
    4
    0
    MCE remote stops working after awakening from Standby mode. In Event log there ia a warning :
    "Timed out sending notification of device interface change to window of "C:\Program Files\IR Server Suite\Input Service\Input Service.exe". To cure it I need to reconfigure Input service.
    To handle Standby I use MCE Standby Tool 0.9.75. I tried different settings om MP page,
    nothing seems to be working. Also I use Tray Launcher to start MP.
    Is it known issue? I cannot find any reference to this error, so I assime I am missing something obvious here.
     

    and-81

    Retired Team Member
  • Premium Supporter
  • March 7, 2005
    2,257
    183
    Melbourne
    Home Country
    Australia Australia
    Olegus:
    That is not a known error, I haven't seen it before.

    Can you tell me more about your setup:
    Remote model,
    Operating system,
    drivers (default or replacement),
    Any registry modifications,
    What sort of Standby (S1, S3, S4),

    And if it is possible can you post log files from the Input Service?

    The error sounds like the Input Service has locked up or crashed around the suspend/resume and windows is failing to notify it of the device availability.

    I've been doing all my suspend/resume testing with the USB device still getting power while suspended, maybe I need to test what happens when the usb receiver loses power ...

    Thanks for letting me know about the problem, if you can provide some more information it will help me a lot and I'll try to have this sorted out for the next version.

    Thanks,
     

    Olegus

    New Member
    August 28, 2007
    4
    0
    I'll try my best to give you all info you need .
    OS - XPSP2
    Remote version - there is a model number on IR receiver -HA-IR01SV(TSDX IR07)
    eHome driver did not want to recognize it until I added VID/PID record to .inf.
    I think at some moment I tried eHome driver and MCE replacement driver, but latter did not work for me at all
    and I switched back to eHome.

    I use S3 mode.
    I must say, my system is pretty week - it is Athlon 1500.

    With old version of IR Server I had this behavor on and off. Now it is constant - after waking up my remote stops working. For 15-20 seconds after wake up even red led on receiver does not react on key presses, then it come on, but now MP does not react until I restart input service.
    Hope it helps.

    Forgot to attach my log. :
    7.01.2008 21:24:52: Log Opened
    2008-01-07 21:24:52.953125 - Info: Starting Input Service ...
    2008-01-07 21:24:53.625000 - Info: Started in Server Mode
    2008-01-07 21:24:53.750000 - Debug: Server message received: RegisterClient, Request
    2008-01-07 21:24:53.750000 - Info: Registered a client
    2008-01-07 21:24:53.781250 - Debug: SendTo(RegisterClient, Response, Success)
    2008-01-07 21:24:54.328125 - Info: Transmit and Receive plugin started: "Microsoft MCE"
    2008-01-07 21:24:54.328125 - Info: Input Service started
    2008-01-07 21:24:56.078125 - Debug: Remote Event: 31730
    2008-01-07 21:24:56.078125 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:04.250000 - Debug: Server message received: RegisterClient, Request
    2008-01-07 21:25:04.250000 - Info: Registered a client
    2008-01-07 21:25:04.250000 - Debug: SendTo(RegisterClient, Response, Success)
    2008-01-07 21:25:09.359375 - Debug: Remote Event: 31713
    2008-01-07 21:25:09.359375 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:10.515625 - Debug: Remote Event: 31713
    2008-01-07 21:25:10.515625 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:11.281250 - Debug: Remote Event: 31713
    2008-01-07 21:25:11.281250 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:11.906250 - Debug: Remote Event: 31713
    2008-01-07 21:25:11.906250 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:12.500000 - Debug: Remote Event: 31713
    2008-01-07 21:25:12.500000 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:13.015625 - Debug: Remote Event: 31713
    2008-01-07 21:25:13.015625 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:13.765625 - Debug: Remote Event: 31712
    2008-01-07 21:25:13.765625 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:14.265625 - Debug: Remote Event: 31712
    2008-01-07 21:25:14.265625 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:14.781250 - Debug: Remote Event: 31712
    2008-01-07 21:25:14.781250 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:17.156250 - Debug: Remote Event: 31731
    2008-01-07 21:25:17.156250 - Debug: SendToAll(RemoteEvent, Notify)
    2008-01-07 21:25:57.250000 - Info: Entering standby ...
    2008-01-07 21:25:57.406250 - Debug: SendToAll(ServerSuspend, Notify)
    2008-01-07 21:26:18.671875 - Info: Resume from standby ...
    2008-01-07 21:26:18.671875 - Debug: SendToAll(ServerResume, Notify)
    2008-01-07 21:26:19.546875 - Info: Resume from standby ...
    2008-01-07 21:26:19.546875 - Debug: SendToAll(ServerResume, Notify)
     

    M4TH

    Portal Member
    January 19, 2007
    44
    0
    48
    Montréal, Qc
    Home Country
    Canada Canada
    Hi
    I have a small bug, I get an error message when I use "Pause" in macros
    Error Message: "Object reference not set to an instance of an object"

    Beau travail en passant!

    Math
     
    Status
    Not open for further replies.

    Users who are viewing this thread

    Top Bottom