Specific prefix :
Show all
1.36
1.35
1.34
1.33
1.32
1.31.0
1.30.0
1.29.0
1.28.0
1.27.0
1.26.0
1.25.0
1.24.0
1.23.0
1.22.0
1.21.0
1.20.0
1.19.0
1.18.0
1.17.0
1.16.0
1.15.0
1.14.0
1.13.0
1.12.0
1.11.0
1.10.0
[Music]
[TV]
[Pictures]
[Configuration]
[Videos]
[DVD]
[Remote]
[VFD]
[EPG]
[Installation]
[Radio]
[Skin]
[Usability]
[other]
MediaPortal 1
MediaPortal 2
TV-Server
MPTagThat
Documentation
Installer
[solved]
MP configuration can crash on startup if codecs are not registered properly in the system registry. This might happen if codec packs or other media software has been installed and/or uninstalled improperly.
http://mantis.team-mediaportal.com/view.php?id=3704
Open the issue in Mantis...
MP configuration can crash on startup if codecs are not registered properly in the system registry. This might happen if codec...
MP configuration can crash on startup if codecs are not registered properly in the system registry. This might happen if codec...
- Rename IMediaProvider to IResourceProvider (and all related classes)
- Rename project MediaPortal.Core to MediaPortal.General
- Rename solution folder System to Core
http://mantis.team-mediaportal.com/view.php?id=3703
Open the issue in Mantis...
- Rename IMediaProvider to IResourceProvider (and all related classes)
- Rename project MediaPortal.Core to MediaPortal.General
-...
- Rename IMediaProvider to IResourceProvider (and all related classes)
- Rename project MediaPortal.Core to MediaPortal.General
-...
The last few versions of MediaPortal (alpha, beta, RC) have identifies themselves in the registry as 1.2.0. As a result of this, it is not possible to update from these versions to 1.2.0.
We need to fix this!
http://mantis.team-mediaportal.com/view.php?id=3702
Open the issue in Mantis...
The last few versions of MediaPortal (alpha, beta, RC) have identifies themselves in the registry as 1.2.0. As a result of this, it...
The last few versions of MediaPortal (alpha, beta, RC) have identifies themselves in the registry as 1.2.0. As a result of this, it...
The following tags are missing within the database / views etc
AlbumArtistsSort
AlbumSort
ComposersSort
Grouping
TitleSort
PerformersSort
http://mantis.team-mediaportal.com/view.php?id=3701
Open the issue in Mantis...
The following tags are missing within the database / views etc
AlbumArtistsSort
AlbumSort
ComposersSort
Grouping
TitleSort...
The following tags are missing within the database / views etc
AlbumArtistsSort
AlbumSort
ComposersSort
Grouping
TitleSort...
The current scraping of artist and album info has many flaws. This should be reworked (possibly scripted to allow for custom scrapers ?)
http://mantis.team-mediaportal.com/view.php?id=3699
Open the issue in Mantis...
The current scraping of artist and album info has many flaws. This should be reworked (possibly scripted to allow for custom...
The current scraping of artist and album info has many flaws. This should be reworked (possibly scripted to allow for custom...
The current visualization code has several flaws and does not work with latest version of Milkdrop.
http://mantis.team-mediaportal.com/view.php?id=3700
Open the issue in Mantis...
The current visualization code has several flaws and does not work with latest version of Milkdrop...
The current visualization code has several flaws and does not work with latest version of Milkdrop...
Look at implementing WASAPI support within BASS player
http://mantis.team-mediaportal.com/view.php?id=3696
Open the issue in Mantis...
Look at implementing WASAPI support within BASS player
http://mantis.team-mediaportal.com/view.php?id=3696
Open the issue in...
Look at implementing WASAPI support within BASS player
http://mantis.team-mediaportal.com/view.php?id=3696
Open the issue in...
Clean up BASS implementation
http://mantis.team-mediaportal.com/view.php?id=3695
Open the issue in Mantis...
Clean up BASS implementation
http://mantis.team-mediaportal.com/view.php?id=3695
Open the issue in Mantis...
Clean up BASS implementation
http://mantis.team-mediaportal.com/view.php?id=3695
Open the issue in Mantis...
There are several issues with current ASIO implementation.
http://mantis.team-mediaportal.com/view.php?id=3697
Open the issue in Mantis...
There are several issues with current ASIO implementation.
http://mantis.team-mediaportal.com/view.php?id=3697
Open the issue in...
There are several issues with current ASIO implementation.
http://mantis.team-mediaportal.com/view.php?id=3697
Open the issue in...
Implement Replay Gain support in BASS player.
http://mantis.team-mediaportal.com/view.php?id=3698
Open the issue in Mantis...
Implement Replay Gain support in BASS player.
http://mantis.team-mediaportal.com/view.php?id=3698
Open the issue in Mantis...
Implement Replay Gain support in BASS player.
http://mantis.team-mediaportal.com/view.php?id=3698
Open the issue in Mantis...
this happens very rarely.
after an upgrade to a new MP version, the SQL servers hostname inside the tv-servers gentle.config is replaced with "localhost" without any userinteraction.
this breaks multiseat completelly and if the database is on an other PC, it even breaks singleseat...
this happens very rarely.
after an upgrade to a new MP version, the SQL servers hostname inside the tv-servers gentle.config is...
this happens very rarely.
after an upgrade to a new MP version, the SQL servers hostname inside the tv-servers gentle.config is...
MediaPortal should also be able to use a present "folder.png" and not only a "folder.jpg".
Pro would be that the png allows transparent areas of the image, which looks a lot better in many skins.
So MediaPortal should first check for an folder.png, and if there is none, then look for a folder.jpg...
MediaPortal should also be able to use a present "folder.png" and not only a "folder.jpg".
Pro would be that the png allows...
MediaPortal should also be able to use a present "folder.png" and not only a "folder.jpg".
Pro would be that the png allows...
If you are searching the EPG by description, and click on the description of a program, you should obtain the dialog which allows you to set a recording. This does not happen. Please see the forum thread (additional information) for more details.
http://mantis.team-mediaportal.com/view.php?id=2392
Open the issue in Mantis...
If you are searching the EPG by description, and click on the description of a program, you should obtain the dialog which allows...
If you are searching the EPG by description, and click on the description of a program, you should obtain the dialog which allows...
If you are searching/filtering the EPG by description, then when you move focus onto a description, the full description is shown at the bottom of the screen, along with the channel, time, etc.
The one thing that is missing from here is the title of the program, which you cannot always guess from the description...
If you are searching/filtering the EPG by description, then when you move focus onto a description, the full description is shown...
If you are searching/filtering the EPG by description, then when you move focus onto a description, the full description is shown...
When watching tv with Mediaportal in windowed mode and timeshift is on if you minimise and restore several times, mediaportal eventually becomes unresponsive forcing you to quit the process in task manager
http://mantis.team-mediaportal.com/view.php?id=721
Open the issue in Mantis...
When watching tv with Mediaportal in windowed mode and timeshift is on if you minimise and restore several times, mediaportal...
When watching tv with Mediaportal in windowed mode and timeshift is on if you minimise and restore several times, mediaportal...
Please refer to https://forum.team-mediaportal.com/showthread.php?t=14648 [^] for details of the problem.
In summary, temporary interference to the DVB-T signal causes MediaPortal to "stutter" and then freeze, even though the interference has ceased and a normal DVB-T signal is available. By contrast, Windows MCE exhibits the same...
Please refer to https://forum.team-mediaportal.com/showthread.php?t=14648 [^] for details of the problem.
In summary, temporary...
Please refer to https://forum.team-mediaportal.com/showthread.php?t=14648 [^] for details of the problem.
In summary, temporary...
In MediaPortal 0.2.0.0 when you change the channel, the timeshiftbuffer gets cleared. In TV-Server this does not happen.
after you switched the channel you can go back in the timeshiftbuffer where you see the channel you watched before.
http://mantis.team-mediaportal.com/view.php?id=936
Open the issue in Mantis...
In MediaPortal 0.2.0.0 when you change the channel, the timeshiftbuffer gets cleared. In TV-Server this does not happen.
after you...
In MediaPortal 0.2.0.0 when you change the channel, the timeshiftbuffer gets cleared. In TV-Server this does not happen.
after you...
It would be nice to have a card-priority for every channel. Let me describe a setting:
I have two cards, one analogue-cabel and one DVB-T. Some channels are better recorded with DVB-T and some better with analogue, e.g. ZDF is good with DVB-T, but Kabel1 should be recorded with analgoue. So it would be nice if I could select the...
It would be nice to have a card-priority for every channel. Let me describe a setting:
I have two cards, one analogue-cabel and...
It would be nice to have a card-priority for every channel. Let me describe a setting:
I have two cards, one analogue-cabel and...
one of the biggest problems we always notice when we help ppl is that they do not understand the meaning of some features/options if their native language is not english.
therefor we should add multilanguage support to setuptv.
http://mantis.team-mediaportal.com/view.php?id=1061
Open the issue in Mantis...
one of the biggest problems we always notice when we help ppl is that they do not understand the meaning of some features/options...
one of the biggest problems we always notice when we help ppl is that they do not understand the meaning of some features/options...
If you resize the MediaPortal window and TV is fullscreen it does not turn back on tv after the sizinf excercise is finished.
http://mantis.team-mediaportal.com/view.php?id=1179
Open the issue in Mantis...
If you resize the MediaPortal window and TV is fullscreen it does not turn back on tv after the sizinf excercise is finished...
If you resize the MediaPortal window and TV is fullscreen it does not turn back on tv after the sizinf excercise is finished...
this is a "interesting" issue. if you tune a channel inside manual control and connect to this RTSP stream with i.e. VLC, then the "RTSP client session times out" after 45 seconds.
*uptdate*
it was reported that the issue seems only to occur with "VLC 0.8.6i".
if you use VLC 0.8.6e then it works nicely.
maybe a VLC bug...
this is a "interesting" issue. if you tune a channel inside manual control and connect to this RTSP stream with i.e. VLC, then the...
this is a "interesting" issue. if you tune a channel inside manual control and connect to this RTSP stream with i.e. VLC, then the...
TvControl's User() should be clarified how it's suppose to work and if current mode of operation is intended. See details in:
https://forum.team-mediaportal.com/get-support-90/tvcontrol-user-not-proper-41443/ [^]
http://mantis.team-mediaportal.com/view.php?id=1408
Open the issue in Mantis...
TvControl's User() should be clarified how it's suppose to work and if current mode of operation is intended. See details in...
TvControl's User() should be clarified how it's suppose to work and if current mode of operation is intended. See details in...
TV-server needs configuration to either have option to disable log rotation or define more sensible rotation patters, like weekly, monthly.
Now there's no way to find out why recording failed 2 days ago as you have only logs from yesterday night till now.
http://mantis.team-mediaportal.com/view.php?id=1627
Open the issue in Mantis...
TV-server needs configuration to either have option to disable log rotation or define more sensible rotation patters, like weekly...
TV-server needs configuration to either have option to disable log rotation or define more sensible rotation patters, like weekly...
If no devices are connected to the Hauppauge HDPVR the device hangs TVServer.
The PMT timeout doesn't take effect.
http://mantis.team-mediaportal.com/view.php?id=1658
Open the issue in Mantis...
If no devices are connected to the Hauppauge HDPVR the device hangs TVServer.
The PMT timeout doesn't take effect...
If no devices are connected to the Hauppauge HDPVR the device hangs TVServer.
The PMT timeout doesn't take effect...
See thread https://forum.team-mediaportal.com/development-mp-1-0-1-283/remember-use-mpaudioswitcher-audio-mixing-per-channel-basis-48311/ [^]
http://mantis.team-mediaportal.com/view.php?id=1844
Open the issue in Mantis...
See thread...
See thread...
In MediaPortal we allready have the "priorities" section implemented. but for some reason, noone added the required logic to the TV-Server.
and because of this, we have a not working priorities section in MyTV...
In MediaPortal we allready have the "priorities" section implemented. but for some reason, noone added the required logic to the...
In MediaPortal we allready have the "priorities" section implemented. but for some reason, noone added the required logic to the...
The current solution (by not deleting anything) is poor, because if you use a huge Satellite network (i.e. Astra 19.2), there are frequently changes in the channel lists.
* channel change there transponders
* new channels appear and vanish after a shart time
* channels change thier names (i.e. "Kabel 1" becomes "Kabel...
The current solution (by not deleting anything) is poor, because if you use a huge Satellite network (i.e. Astra 19.2), there are...
The current solution (by not deleting anything) is poor, because if you use a huge Satellite network (i.e. Astra 19.2), there are...
In TVE2 it is possible to download a complete channellist (analog) from our webservers, by entering the location you live in.
This should be ported to the TV-Server.
As soon as we did this, we will ease up the process for our users to submit updated channellists which we make then available online...
In TVE2 it is possible to download a complete channellist (analog) from our webservers, by entering the location you live in.
This...
In TVE2 it is possible to download a complete channellist (analog) from our webservers, by entering the location you live in.
This...
Many paytv providers require that you activate a smartcard on an encryped channel.
This means that you have to tune that channel for up to 2 hours, until the card "uppdates" and becomes active.
Currently the only way to do that is using the "preview" option inside setuptv.exe.
You can not use manual control, since TvServer will...
Many paytv providers require that you activate a smartcard on an encryped channel.
This means that you have to tune that channel...
Many paytv providers require that you activate a smartcard on an encryped channel.
This means that you have to tune that channel...
When user resumes the recoding from the previously stopped playback position the 1st frame is displated briefly before the correct file position is found.
http://mantis.team-mediaportal.com/view.php?id=2387
Open the issue in Mantis...
When user resumes the recoding from the previously stopped playback position the 1st frame is displated briefly before the correct...
When user resumes the recoding from the previously stopped playback position the 1st frame is displated briefly before the correct...