Bugtracker Feed (5 Viewers)

Follow our Mantis Bugtracker via RSS
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/03_TV_Channels/2_Mapping Select tuner up the top; select channel(s) on the left; click ">".
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/03_TV_Channels/2_Mapping Select tuner...
According to DVB guidelines, ONID + TSID + SID should be unique in all the world. However intermittent feeds and some non-compliant...
Replies
6
Views
5K
Currently the TVServer logging is always in 'Debug' mode and can not be changed. Continue reading...
Currently the TVServer logging is always in 'Debug' mode and can not be changed. Continue reading...
Currently the TVServer logging is always in 'Debug' mode and can not be changed. Continue reading...
Replies
0
Views
1K
If you have a manual recording running, then click the 'stop record' button in TV home, you get a dialog warning that DELETING the recording will stop it.<br /> <br /> If you select 'Active Recordings' and then select the recording, you get the correct 'Stop Recording' dialog.<br /> <br /> Should hopefully be easy enough to fix. :)...
If you have a manual recording running, then click the 'stop record' button in TV home, you get a dialog warning that DELETING the...
If you have a manual recording running, then click the 'stop record' button in TV home, you get a dialog warning that DELETING the...
Replies
0
Views
599
When you lookup IMDb info from a movie in your EPG, you'll run into errors:<br /> [2013-05-18 21:05:16,558] [Log ] [MPMain ] [ERROR] - Exception: System.NullReferenceException: Object reference not set to an instance of an object.<br /> at TvPlugin.TvGuideBase.OnGetIMDBInfo() Continue reading...
When you lookup IMDb info from a movie in your EPG, you'll run into errors:<br /> [2013-05-18 21:05:16,558] [Log ] [MPMain ]...
When you lookup IMDb info from a movie in your EPG, you'll run into errors:<br /> [2013-05-18 21:05:16,558] [Log ] [MPMain ]...
Replies
0
Views
620
On the server, if you play part of a recording, then stop and play again, it always starts from the beginning and never asks if you want to resume from the previous point.<br /> <br /> On a multiseat client this is all still working perfectly. Continue reading...
On the server, if you play part of a recording, then stop and play again, it always starts from the beginning and never asks if you...
On the server, if you play part of a recording, then stop and play again, it always starts from the beginning and never asks if you...
Replies
0
Views
476
This change integrates the PowerScheduler++ plugin into Mediaportal, therefore the built-in PowerScheduler is replaced by the Powerscheduler++ functionality. Continue reading...
This change integrates the PowerScheduler++ plugin into Mediaportal, therefore the built-in PowerScheduler is replaced by the...
This change integrates the PowerScheduler++ plugin into Mediaportal, therefore the built-in PowerScheduler is replaced by the...
Replies
0
Views
509
Some 'raw' (not LATM) AAC audio from IPTV streams does not play using LAV audio decoder with TsReader.ax. See <a href="https://forum.team-mediaportal.com/threads/rtsp-issue-french-provider-free.118930/">https://forum.team-mediaportal.com/threads/rtsp-issue-french-provider-free.118930/</a> [<a...
Some 'raw' (not LATM) AAC audio from IPTV streams does not play using LAV audio decoder with TsReader.ax. See <a...
Some 'raw' (not LATM) AAC audio from IPTV streams does not play using LAV audio decoder with TsReader.ax. See <a...
Replies
0
Views
1K
When importing TV config settings made by older versions of MP (before 1.4) the import throws an exception. Continue reading...
When importing TV config settings made by older versions of MP (before 1.4) the import throws an exception. Continue reading...
When importing TV config settings made by older versions of MP (before 1.4) the import throws an exception. Continue reading...
Replies
0
Views
564
Video-only channels cannot be timeshifted or recorded.<br /> There are currently TV Server limitations that require audio to be present when video is present, and there may also be limitations in TsReader and/or MP itself.<br /> <br /> It may be useful to add support for video-only channels if/when adding support for capture devices...
Video-only channels cannot be timeshifted or recorded.<br /> There are currently TV Server limitations that require audio to be...
Video-only channels cannot be timeshifted or recorded.<br /> There are currently TV Server limitations that require audio to be...
Replies
0
Views
581
What needs to be added we can find here: <a href="https://forum.team-mediaportal.com/forums/submit-epg-grabbers-and-tuningdetails.296/">https://forum.team-mediaportal.com/forums/submit-epg-grabbers-and-tuningdetails.296/</a> [<a href="https://forum.team-mediaportal.com/forums/submit-epg-grabbers-and-tuningdetails.296/"...
What needs to be added we can find here: <a...
What needs to be added we can find here: <a...
Replies
0
Views
653
Major channel numbers with value greater than 63 are not parsed correctly.<br /> Refer to the detailed information here:<br /> <a...
Major channel numbers with value greater than 63 are not parsed correctly.<br /> Refer to the detailed information here:<br /> <a...
Major channel numbers with value greater than 63 are not parsed correctly.<br /> Refer to the detailed information here:<br /> <a...
Replies
0
Views
678
In most cases, North American cable providers do not broadcast channel names and LCNs in such a way that clear QAM tuners can receive them. (Channel data is transmitted in an "out-of-band" frequency using a different modulation system.)<br /> <br /> When the name for a given channel is not available, TV Server assigns the name as:<br...
In most cases, North American cable providers do not broadcast channel names and LCNs in such a way that clear QAM tuners can...
In most cases, North American cable providers do not broadcast channel names and LCNs in such a way that clear QAM tuners can...
Replies
0
Views
634
Clear QAM channels are scanned using the QAM Standard, QAM HRC, QAM IRC, QAM HRC + 3 and QAM Std Alternative tuning detail files.<br /> <br /> The frequencies listed in those files should match the details here:<br /> <a...
Clear QAM channels are scanned using the QAM Standard, QAM HRC, QAM IRC, QAM HRC + 3 and QAM Std Alternative tuning detail...
Clear QAM channels are scanned using the QAM Standard, QAM HRC, QAM IRC, QAM HRC + 3 and QAM Std Alternative tuning detail...
Replies
0
Views
609
In order to start playback of a recording you have to use the 'okay' button. 'play' does not do anything.<br /> <br /> There is a GIT branch for this.<br /> <br /> <a href="https://github.com/MediaPortal/MediaPortal-1/tree/FEAT_Play_in_recorded_tv">https://github.com/MediaPortal/MediaPortal-1/tree/FEAT_Play_in_recorded_tv</a> [<a...
In order to start playback of a recording you have to use the 'okay' button. 'play' does not do anything.<br /> <br /> There is a...
In order to start playback of a recording you have to use the 'okay' button. 'play' does not do anything.<br /> <br /> There is a...
Replies
0
Views
508
Remove old master/slave code to increase performance and stability Continue reading...
Remove old master/slave code to increase performance and stability Continue reading...
Remove old master/slave code to increase performance and stability Continue reading...
Replies
0
Views
448
TV Server does not support storing ATSC xx.yy LCNs in the LCN field.<br /> Currently these LCNs are stored in separate "major channel" and "minor channel" fields, which means the LCN can't be used for zapping.<br /> <br /> Refer to standard ATSC A-65 Program & System Information Protocol For Terrestrial Broadcast & Cable.<br />...
TV Server does not support storing ATSC xx.yy LCNs in the LCN field.<br /> Currently these LCNs are stored in separate "major...
TV Server does not support storing ATSC xx.yy LCNs in the LCN field.<br /> Currently these LCNs are stored in separate "major...
Replies
0
Views
548
This issue is not easy to describe precisely except by the steps to reproduce it. Continue reading...
This issue is not easy to describe precisely except by the steps to reproduce it. Continue reading...
This issue is not easy to describe precisely except by the steps to reproduce it. Continue reading...
Replies
0
Views
524
If you watch a recording and press near the end (~10mins) the skip step button right MP skips to the end of the recording but doesn't stop playback => you have just a frozen frame if you than press -15sek (skip step) MP stops playback Continue reading...
If you watch a recording and press near the end (~10mins) the skip step button right MP skips to the end of the recording but...
If you watch a recording and press near the end (~10mins) the skip step button right MP skips to the end of the recording but...
Replies
0
Views
535
TsReader.ax FFDShow video decoder AV sync workaround fails when 'Core CC Parser' filter is used, because TsReader.ax assumes decode filter is directly connected to it's output pin. Continue reading...
TsReader.ax FFDShow video decoder AV sync workaround fails when 'Core CC Parser' filter is used, because TsReader.ax assumes decode...
TsReader.ax FFDShow video decoder AV sync workaround fails when 'Core CC Parser' filter is used, because TsReader.ax assumes decode...
Replies
0
Views
578
Update TsReader.ax code to include bug fixes and updates already tested in the experimental 'noStopMod70' version - see <a href="https://forum.team-mediaportal.com/threads/experimental-tsreader-development.102693/#post-811296">https://forum.team-mediaportal.com/threads/experimental-tsreader-development.102693/#post-811296</a> [<a...
Update TsReader.ax code to include bug fixes and updates already tested in the experimental 'noStopMod70' version - see <a...
Update TsReader.ax code to include bug fixes and updates already tested in the experimental 'noStopMod70' version - see <a...
Replies
0
Views
846
I borrowed a MP singleseat install for troubleshooting purposes.<br /> This PC is called PC1.<br /> <br /> At home configured the servername in MP config to point to my home server called "server".<br /> <br /> I then stopped tvservice on PC1.<br /> <br /> Once I was done with the PC1, I returned the PC to the user.<br /> <br /> I...
I borrowed a MP singleseat install for troubleshooting purposes.<br /> This PC is called PC1.<br /> <br /> At home configured the...
I borrowed a MP singleseat install for troubleshooting purposes.<br /> This PC is called PC1.<br /> <br /> At home configured the...
Replies
0
Views
501
TvService crash due to unhandled exception in OnPMTReceived() method when any exception is thrown (see tvserver_tv.log, time: 2013-04-04 19:01:16.984375). Continue reading...
TvService crash due to unhandled exception in OnPMTReceived() method when any exception is thrown (see tvserver_tv.log, time...
TvService crash due to unhandled exception in OnPMTReceived() method when any exception is thrown (see tvserver_tv.log, time...
Replies
0
Views
532
KWorld (Cyberlink) software encoders are supported but not included in the default installation. This means people with KWorld analog tuners have to define these encoders in the database manually, which is quite inconvenient.<br /> <br /> The solution is to add the definitions to the database as part of the installation, as we do for...
KWorld (Cyberlink) software encoders are supported but not included in the default installation. This means people with KWorld...
KWorld (Cyberlink) software encoders are supported but not included in the default installation. This means people with KWorld...
Replies
0
Views
634
Renaming channels with the service ID is performed even with channels that don't have a real service ID.<br /> <br /> In TV Server configuration, it is possible to [for all channels]:<br /> 1. Set the LCN as the service ID from the first tuning detail.<br /> 2. Set the channel name as the service ID from the first tuning detail.<br />...
Renaming channels with the service ID is performed even with channels that don't have a real service ID.<br /> <br /> In TV Server...
Renaming channels with the service ID is performed even with channels that don't have a real service ID.<br /> <br /> In TV Server...
Replies
0
Views
526
The purpose of 'only grab EPG data for selected channels' in the TV and radio sections of SetupTV.exe is to allow the option of only storing data for channels that are selected.<br /> <br /> If this option is not checked (and it isn't be default), then the expected behaviour is that data for all channels will be stored.<br /> <br />...
The purpose of 'only grab EPG data for selected channels' in the TV and radio sections of SetupTV.exe is to allow the option of...
The purpose of 'only grab EPG data for selected channels' in the TV and radio sections of SetupTV.exe is to allow the option of...
Replies
0
Views
509
The skin engine enhancements for 1.3.0Alpha sneaked in a change of behaviour whereby when you open the TV EPG the channel at the top of the list is the last-tuned channel, not the first channel in the group.<br /> <br /> As a side-effect of this, if a channel has never been tuned (new install) then entering the EPG is not possibly...
The skin engine enhancements for 1.3.0Alpha sneaked in a change of behaviour whereby when you open the TV EPG the channel at the...
The skin engine enhancements for 1.3.0Alpha sneaked in a change of behaviour whereby when you open the TV EPG the channel at the...
Replies
0
Views
642
Logic for enabling/disabling the QAM frequency plan field is flawed.<br /> <br /> The field should be enabled when "tune QAM instead of ATSC..." is ticked and disabled when "tune QAM instead of ATSC..." is not ticked.<br /> <br /> Currently after scanning, the field is automatically enabled, regardless of whether "tune QAM instead of...
Logic for enabling/disabling the QAM frequency plan field is flawed.<br /> <br /> The field should be enabled when "tune QAM...
Logic for enabling/disabling the QAM frequency plan field is flawed.<br /> <br /> The field should be enabled when "tune QAM...
Replies
0
Views
531
In TV setup you have the option to set "movie" or "series" format masks. These names are misleading and they are actually for one off or multiple schedules.<br /> <br /> So if you record one episode of a series it will use the movie mask even though the user might be expecting for it to use the series mask Continue reading...
In TV setup you have the option to set "movie" or "series" format masks. These names are misleading and they are actually for one...
In TV setup you have the option to set "movie" or "series" format masks. These names are misleading and they are actually for one...
Replies
0
Views
396
This is a parent mantis entry to collect the various recorded TV issues. Continue reading...
This is a parent mantis entry to collect the various recorded TV issues. Continue reading...
This is a parent mantis entry to collect the various recorded TV issues. Continue reading...
Replies
0
Views
454
Need to make some minor changes to GetSpokenViewDate to change wording<br /> <br /> This month -> Earlier this month<br /> This year -> Earlier this year<br /> <br /> and add 'Last week'.<br /> <br /> First working version of code<br /> <br /> <a...
Need to make some minor changes to GetSpokenViewDate to change wording<br /> <br /> This month -> Earlier this month<br /> This...
Need to make some minor changes to GetSpokenViewDate to change wording<br /> <br /> This month -> Earlier this month<br /> This...
Replies
0
Views
415
Top Bottom