Mini guide is one of the left over half-implemented non-maintained dialogs which confuse skin engine badly. It should be fixed so it inherits from GUIDialogWindow which will fix the error below as well as other possible errors.
http://mantis.team-mediaportal.com/view.php?id=3601
Open the issue in Mantis...
Mini guide is one of the left over half-implemented non-maintained dialogs which confuse skin engine badly. It should be fixed so...
Mini guide is one of the left over half-implemented non-maintained dialogs which confuse skin engine badly. It should be fixed so...
If you setup a view and turn the option to skip single entries on the first row (level 0) this works when you enter the view but if you press back
http://mantis.team-mediaportal.com/view.php?id=3600
Open the issue in Mantis...
If you setup a view and turn the option to skip single entries on the first row (level 0) this works when you enter the view but if...
If you setup a view and turn the option to skip single entries on the first row (level 0) this works when you enter the view but if...
The partial recording pin in EPG can sometimes not get cleared when the episode it is showing is going to be recorded has been cancelled
http://mantis.team-mediaportal.com/view.php?id=3599
Open the issue in Mantis...
The partial recording pin in EPG can sometimes not get cleared when the episode it is showing is going to be recorded has been...
The partial recording pin in EPG can sometimes not get cleared when the episode it is showing is going to be recorded has been...
While having fast switch between SMS and standard input modes is very convenient, identification of current input mode is confusing users.
http://mantis.team-mediaportal.com/view.php?id=3598
Open the issue in Mantis...
While having fast switch between SMS and standard input modes is very convenient, identification of current input mode is confusing...
While having fast switch between SMS and standard input modes is very convenient, identification of current input mode is confusing...
While scanning IPTV the TvServer find channels but doesn't add them. Forum thread: https://forum.team-mediaportal.com/mediaportal-1-2-0-beta-540/tvserver-while-scanning-doesnt-add-new-iptv-channels-95882/ [^]
http://mantis.team-mediaportal.com/view.php?id=3597
Open the issue in Mantis...
While scanning IPTV the TvServer find channels but doesn't add them. Forum thread...
While scanning IPTV the TvServer find channels but doesn't add them. Forum thread...
LAV Splitter can parse ITrackInfo information to know what subtitle track is the Forced Subtitle one.
Cpp2005 has patch MPC-HC Engine and it's working very nicely :)
Now we can have Forced Subtitle with MPC Matroska Splitter and LAV Splitter.
Thank cpp2005 and nevcairiel to add ITrackInfo to LAV Splitter.
Patch is attached...
LAV Splitter can parse ITrackInfo information to know what subtitle track is the Forced Subtitle one.
Cpp2005 has patch MPC-HC...
LAV Splitter can parse ITrackInfo information to know what subtitle track is the Forced Subtitle one.
Cpp2005 has patch MPC-HC...
If you set a level in a music view to have a default layout of coverflow but this is not implemented in the skin you are using then rather than gracefully just choosing list layout you get a null reference exception and nothing is displayed.
http://mantis.team-mediaportal.com/view.php?id=3595
Open the issue in Mantis...
If you set a level in a music view to have a default layout of coverflow but this is not implemented in the skin you are using then...
If you set a level in a music view to have a default layout of coverflow but this is not implemented in the skin you are using then...
1. Set a schedule 'every day at this time'.
2. Wait until it is recording.
3. Go to 'schedules' and cancel a future episode of the same schedule.
Expected - it just cancels the episode you selected.
Actual - it warns you that the schedule is recording, and if you continue, it also stops the current schedule...
1. Set a schedule 'every day at this time'.
2. Wait until it is recording.
3. Go to 'schedules' and cancel a future episode of...
1. Set a schedule 'every day at this time'.
2. Wait until it is recording.
3. Go to 'schedules' and cancel a future episode of...
We get the first day of the week from windows, and then assume that this is the first day of a five-day working week, with a two day weekend. This is not always correct.
http://mantis.team-mediaportal.com/view.php?id=3593
Open the issue in Mantis...
We get the first day of the week from windows, and then assume that this is the first day of a five-day working week, with a two...
We get the first day of the week from windows, and then assume that this is the first day of a five-day working week, with a two...
Some new skin properties are not being set to an empty string.
This means that when a skin uses one of these labels before it is set then skin property will be output as a literal
Eg. in music views the #music.genre property is only set once an item is selected on the facade. If no item is selected then this property will never...
Some new skin properties are not being set to an empty string.
This means that when a skin uses one of these labels before it is...
Some new skin properties are not being set to an empty string.
This means that when a skin uses one of these labels before it is...
No matter which share you select as default in music config, you are always taken to the top level when you enter 'My Music'.
http://mantis.team-mediaportal.com/view.php?id=3591
Open the issue in Mantis...
No matter which share you select as default in music config, you are always taken to the top level when you enter 'My Music'...
No matter which share you select as default in music config, you are always taken to the top level when you enter 'My Music'...
Just a reminder to update default DVB-S tuning details with latest values prior to release of 1.2
http://mantis.team-mediaportal.com/view.php?id=3590
Open the issue in Mantis...
Just a reminder to update default DVB-S tuning details with latest values prior to release of 1.2...
Just a reminder to update default DVB-S tuning details with latest values prior to release of 1.2...
If you pause a movie and then hit the step forward button a movie's playback is continued even though MP still shows it's in pause mode. Skipping steps in pause mode should not resume playback.
http://mantis.team-mediaportal.com/view.php?id=3589
Open the issue in Mantis...
If you pause a movie and then hit the step forward button a movie's playback is continued even though MP still shows it's in pause...
If you pause a movie and then hit the step forward button a movie's playback is continued even though MP still shows it's in pause...
On a fresh installation the splash doesn't vanish when opening the configuration tool for the first time.
http://mantis.team-mediaportal.com/view.php?id=3588
Open the issue in Mantis...
On a fresh installation the splash doesn't vanish when opening the configuration tool for the first time...
On a fresh installation the splash doesn't vanish when opening the configuration tool for the first time...
Changes in physical input and audio encoding are not handled. The Colossus is able to encode PCM to AAC or pass through AC3. Changing between channels with AAC and AC3 audio leads to silence. Also, the Colossus and HDPVR have a number of physical inputs. If one channel is available from one set of inputs and a second channel is...
Changes in physical input and audio encoding are not handled. The Colossus is able to encode PCM to AAC or pass through AC3...
Changes in physical input and audio encoding are not handled. The Colossus is able to encode PCM to AAC or pass through AC3...
The Hauppauge Colossus HDMI inputs can't be used. They are simply not handled by the crossbar mapping or input selection logic.
http://mantis.team-mediaportal.com/view.php?id=3586
Open the issue in Mantis...
The Hauppauge Colossus HDMI inputs can't be used. They are simply not handled by the crossbar mapping or input selection logic...
The Hauppauge Colossus HDMI inputs can't be used. They are simply not handled by the crossbar mapping or input selection logic...
Setting a default layout of coverflow when adding a picture folder is not working.
http://mantis.team-mediaportal.com/view.php?id=3585
Open the issue in Mantis...
Setting a default layout of coverflow when adding a picture folder is not working...
Setting a default layout of coverflow when adding a picture folder is not working...
To reproduce:
1. Open MP.
2. Go to the TV section.
3. Start watching any channel, but to *do not* go to full screen so that the topbar is still available.
4. Click/"activate" the second bottom from the right (looks like a square).
--> video will sort of go full screen, but on the background surface, not properly
5. Click/"activate"...
To reproduce:
1. Open MP.
2. Go to the TV section.
3. Start watching any channel, but to *do not* go to full screen so that the...
To reproduce:
1. Open MP.
2. Go to the TV section.
3. Start watching any channel, but to *do not* go to full screen so that the...
If you scroll through the EPG using the pageup/pagedown buttons, it scrolls one channel at a time and updates the screen every time.
This can be very visible if the CPU is under load, and is easy to fix. The fix is in the linked thread.
http://mantis.team-mediaportal.com/view.php?id=3583
Open the issue in Mantis...
If you scroll through the EPG using the pageup/pagedown buttons, it scrolls one channel at a time and updates the screen every...
If you scroll through the EPG using the pageup/pagedown buttons, it scrolls one channel at a time and updates the screen every...
When you're in the TV EPG and you go to a point in the future and press enter on a show and select repeatings of a show and go back again to the EPG you're still at the same time in the timeline. When you select IMDB on a show and you go back you're again at the current time and not at the point where you selected IMDB...
When you're in the TV EPG and you go to a point in the future and press enter on a show and select repeatings of a show and go back...
When you're in the TV EPG and you go to a point in the future and press enter on a show and select repeatings of a show and go back...
There have been several issues with the two WinForms dialogs we use for the above two warnings. Also they look inconsistent to the rest of MP.
We should show these warnings using regular MP GUI screens that are skinable and have the same look and feel.
http://mantis.team-mediaportal.com/view.php?id=3581
Open the issue in Mantis...
There have been several issues with the two WinForms dialogs we use for the above two warnings. Also they look inconsistent to the...
There have been several issues with the two WinForms dialogs we use for the above two warnings. Also they look inconsistent to the...
When you try to use conditions on animations, as outlined in the wiki:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/18_Contribute/7_Skins/Skin_Architecture/Animations [^]
even the example posted in Wiki does not work. The condition is not respected.
In other cases, the animation goes directly to the last frame of the animation...
When you try to use conditions on animations, as outlined in the wiki...
When you try to use conditions on animations, as outlined in the wiki...
0. Configuration. TVClient -> Make sure loop guide seamlessly is not ticked.
1. Go to TV guide.
2. Scroll to one of the last channels in EPG (one of the last 8 channels if using default skins).
3. Click the channel to start watching.
4. Click Esc (back).
5. Observe that the guide is looped. The first few channels are shown in bottom...
0. Configuration. TVClient -> Make sure loop guide seamlessly is not ticked.
1. Go to TV guide.
2. Scroll to one of the last...
0. Configuration. TVClient -> Make sure loop guide seamlessly is not ticked.
1. Go to TV guide.
2. Scroll to one of the last...
The Line 21 closed captions subtitle index setting is not compatible with some parts of the code. An index of -1 causes an index out of range exception in some situations.
http://mantis.team-mediaportal.com/view.php?id=3578
Open the issue in Mantis...
The Line 21 closed captions subtitle index setting is not compatible with some parts of the code. An index of -1 causes an index...
The Line 21 closed captions subtitle index setting is not compatible with some parts of the code. An index of -1 causes an index...
See the following thread for details and a fix
https://forum.team-mediaportal.com/mediaportal-1-2-0-beta-540/epg-inconsistent-behaviour-when-scrolling-page-up-down-96608/ [^]
http://mantis.team-mediaportal.com/view.php?id=3576
Open the issue in Mantis...
Issue is described here.
https://forum.team-mediaportal.com/mediaportal-1-2-0-beta-540/client-freeze-96189/ [^]
I added a catch exception which seems to have fixed the issue for the user.
http://mantis.team-mediaportal.com/view.php?id=3575
Open the issue in Mantis...
Issue is described here.
https://forum.team-mediaportal.com/mediaportal-1-2-0-beta-540/client-freeze-96189/ [^]
I added a catch...
Issue is described here.
https://forum.team-mediaportal.com/mediaportal-1-2-0-beta-540/client-freeze-96189/ [^]
I added a catch...
This is a long time issue in MediaPortals (Big) Icon Layout, which leads to a state where the user does not see the last line of items.
http://mantis.team-mediaportal.com/view.php?id=3574
Open the issue in Mantis...
This is a long time issue in MediaPortals (Big) Icon Layout, which leads to a state where the user does not see the last line of...
This is a long time issue in MediaPortals (Big) Icon Layout, which leads to a state where the user does not see the last line of...
When adding files to the music database the date added value is not formatted. This works in standard settings however in some localisations the format will not be correct and this means that no valid date is set
http://mantis.team-mediaportal.com/view.php?id=3573
Open the issue in Mantis...
When adding files to the music database the date added value is not formatted. This works in standard settings however in some...
When adding files to the music database the date added value is not formatted. This works in standard settings however in some...
Dialogs that inherit from SetupControls.FormTuningDetailCommon cannot be opened in VS2010 design view. The following design-time error is shown:
FATAL ERROR: No configuration store was found! Gentle is unable to continue! The handlers emitted the following error messages: Unable to create GentleSectionHandler for section named...
Dialogs that inherit from SetupControls.FormTuningDetailCommon cannot be opened in VS2010 design view. The following design-time...
Dialogs that inherit from SetupControls.FormTuningDetailCommon cannot be opened in VS2010 design view. The following design-time...
Discontinuity Error logging was dissabled for some reason in 1.2.0 Alpha.
This error provides useful info because in 99% of all cases, it is caused by a bad signal - this information is a huge timesafer when doing support.
http://mantis.team-mediaportal.com/view.php?id=3571
Open the issue in Mantis...
Discontinuity Error logging was dissabled for some reason in 1.2.0 Alpha.
This error provides useful info because in 99% of all...
Discontinuity Error logging was dissabled for some reason in 1.2.0 Alpha.
This error provides useful info because in 99% of all...