Specific prefix :
Show all
1.36
1.35
1.34
1.33
1.32
1.31.0
1.30.0
1.29.0
1.28.0
1.27.0
1.26.0
1.25.0
1.24.0
1.23.0
1.22.0
1.21.0
1.20.0
1.19.0
1.18.0
1.17.0
1.16.0
1.15.0
1.14.0
1.13.0
1.12.0
1.11.0
1.10.0
[Music]
[TV]
[Pictures]
[Configuration]
[Videos]
[DVD]
[Remote]
[VFD]
[EPG]
[Installation]
[Radio]
[Skin]
[Usability]
[other]
MediaPortal 1
MediaPortal 2
TV-Server
MPTagThat
Documentation
Installer
[solved]
https://forum.team-mediaportal.com/plugins-erweiterungen-178/clickfinder-dreifache-anzeige-75726/#post561894 [^]
http://mantis.team-mediaportal.com/view.php?id=2668
Open the issue in Mantis...
https://forum.team-mediaportal.com/plugins-erweiterungen-178/clickfinder-dreifache-anzeige-75726/#post561894 [^]...
https://forum.team-mediaportal.com/plugins-erweiterungen-178/clickfinder-dreifache-anzeige-75726/#post561894 [^]...
After deactivating the setting, the config sections can't be opened anymore because a wrong value is set to a NumericUpDown.
http://mantis.team-mediaportal.com/view.php?id=2667
Open the issue in Mantis...
After deactivating the setting, the config sections can't be opened anymore because a wrong value is set to a NumericUpDown...
After deactivating the setting, the config sections can't be opened anymore because a wrong value is set to a NumericUpDown...
Thread says it all:
https://forum.team-mediaportal.com/submit-patches-mediaportal-tv-server-etc-325/fix-minidisplaylibrary-swapped-lines-dm140gink-vfd-displays-74948/ [^]
http://mantis.team-mediaportal.com/view.php?id=2666
Open the issue in Mantis...
Thread says it all...
Thread says it all...
If you use a DPI value larger than 100% on your system, then the DeployTool will be resized to this value (i.e. 125%).
This causes alligment errors of the text and makes the graphics look very bad.
Resizing should be avoided.
http://mantis.team-mediaportal.com/view.php?id=2665
Open the issue in Mantis...
If you use a DPI value larger than 100% on your system, then the DeployTool will be resized to this value (i.e. 125%).
This causes...
If you use a DPI value larger than 100% on your system, then the DeployTool will be resized to this value (i.e. 125%).
This causes...
Each channel gets detected by ChannelInfo as not scrambled + error in detection of FTA changes
http://mantis.team-mediaportal.com/view.php?id=2664
Open the issue in Mantis...
Each channel gets detected by ChannelInfo as not scrambled + error in detection of FTA changes...
Each channel gets detected by ChannelInfo as not scrambled + error in detection of FTA changes...
if you are on multiseat and watch a in-progress recording from within MyTV -> recordings, then the "total playtime" dow not update.
this means that after some time, skipsteps nolonger work.
see Steps To Reproduce for more info.
http://mantis.team-mediaportal.com/view.php?id=1472
Open the issue in Mantis...
if you are on multiseat and watch a in-progress recording from within MyTV -> recordings, then the "total playtime" dow not update...
if you are on multiseat and watch a in-progress recording from within MyTV -> recordings, then the "total playtime" dow not update...
https://forum.team-mediaportal.com/submit-patches-mediaportal-tv-server-etc-325/tvengine3-import-section-doesnt-import-dvb-ip-channels-76368/ [^]
http://mantis.team-mediaportal.com/view.php?id=2663
Open the issue in Mantis...
https://forum.team-mediaportal.com/submit-patches-mediaportal-tv-server-etc-325/tvengine3-import-section-doesnt-import-dvb-ip-channe...
https://forum.team-mediaportal.com/submit-patches-mediaportal-tv-server-etc-325/tvengine3-import-section-doesnt-import-dvb-ip-channe...
If you enter Recorded TV while a program is being recorded, that program will be deleted if you enter Recorded TV after it ends.
http://mantis.team-mediaportal.com/view.php?id=2662
Open the issue in Mantis...
If you enter Recorded TV while a program is being recorded, that program will be deleted if you enter Recorded TV after it ends...
If you enter Recorded TV while a program is being recorded, that program will be deleted if you enter Recorded TV after it ends...
Vmr7 is not supported anymore. Also it can block MP with black screen.
http://mantis.team-mediaportal.com/view.php?id=2661
Open the issue in Mantis...
Vmr7 is not supported anymore. Also it can block MP with black screen.
http://mantis.team-mediaportal.com/view.php?id=2661
Open...
Vmr7 is not supported anymore. Also it can block MP with black screen.
http://mantis.team-mediaportal.com/view.php?id=2661
Open...
Sample scheduling can cause wrong v-sync to be used to display the frame when refresh rate and source frame rate doesn't match. This will cause visible juddering on media playback (DVD / TV / AVI etc.)
http://mantis.team-mediaportal.com/view.php?id=2660
Open the issue in Mantis...
Sample scheduling can cause wrong v-sync to be used to display the frame when refresh rate and source frame rate doesn't match...
Sample scheduling can cause wrong v-sync to be used to display the frame when refresh rate and source frame rate doesn't match...
Fix is posted in internal forum thread
https://forum.team-mediaportal.com/mediaportal-releases-315/fix-double-progressbar-issue-live-tv-mini-osd-blue3-wide-76622/ [^]
Needs a little testing before commit.
http://mantis.team-mediaportal.com/view.php?id=2659
Open the issue in Mantis...
Fix is posted in internal forum thread...
Fix is posted in internal forum thread...
When playing music the progress bar does not update smothly.
This is due to the fact that is uses integer percentage. i.e 1,2 .. 100.
For a standard 3 minute song: 1% is 3*60*0.01 = 1.8 sec. This means that
progress changes only each 1.8 sec.
Proposed soluition. Change progress to float i.e. 23,8%. This would increase resolution...
When playing music the progress bar does not update smothly.
This is due to the fact that is uses integer percentage. i.e 1,2 ...
When playing music the progress bar does not update smothly.
This is due to the fact that is uses integer percentage. i.e 1,2 ...
Current playing (highlighted list item) is not updated if current playing change outside My Music
http://mantis.team-mediaportal.com/view.php?id=2657
Open the issue in Mantis...
Current playing (highlighted list item) is not updated if current playing change outside My Music...
Current playing (highlighted list item) is not updated if current playing change outside My Music...
I experienced this https://forum.team-mediaportal.com/mediaportal-releases-315/corrupted-recordings-71355/#post565114: [^]
22:55 start rec
23:07 epg abort
00:00 recording end, tells "no more recording"
resulting recording is only 12 minutes
http://mantis.team-mediaportal.com/view.php?id=2656
Open the issue in Mantis...
I experienced this https://forum.team-mediaportal.com/mediaportal-releases-315/corrupted-recordings-71355/#post565114: [^]
22:55...
I experienced this https://forum.team-mediaportal.com/mediaportal-releases-315/corrupted-recordings-71355/#post565114: [^]
22:55...
Try to adjust settings for radio in MP config tool and exception is raised
http://mantis.team-mediaportal.com/view.php?id=2655
Open the issue in Mantis...
Try to adjust settings for radio in MP config tool and exception is raised
http://mantis.team-mediaportal.com/view.php?id=2655...
Try to adjust settings for radio in MP config tool and exception is raised
http://mantis.team-mediaportal.com/view.php?id=2655...
If user fast forwards over the recorded show's duration it is possible to trigger a crash with using skip steps at that point.
http://mantis.team-mediaportal.com/view.php?id=2654
Open the issue in Mantis...
If user fast forwards over the recorded show's duration it is possible to trigger a crash with using skip steps at that point...
If user fast forwards over the recorded show's duration it is possible to trigger a crash with using skip steps at that point...
Currently, audio is speeded up when FFWD or REW in TV. Audio should be muted instead.
http://mantis.team-mediaportal.com/view.php?id=2653
Open the issue in Mantis...
Currently, audio is speeded up when FFWD or REW in TV. Audio should be muted instead...
Currently, audio is speeded up when FFWD or REW in TV. Audio should be muted instead...
The EVR presenter flushes frames in the queue during fast forward and rewind, which doesn't work well with the way MP has implemented these features.
http://mantis.team-mediaportal.com/view.php?id=2652
Open the issue in Mantis...
The EVR presenter flushes frames in the queue during fast forward and rewind, which doesn't work well with the way MP has...
The EVR presenter flushes frames in the queue during fast forward and rewind, which doesn't work well with the way MP has...
This will cause that virtual keyboard is not displayed at all. Also affects to other GUI rendering.
http://mantis.team-mediaportal.com/view.php?id=2651
Open the issue in Mantis...
This will cause that virtual keyboard is not displayed at all. Also affects to other GUI rendering...
This will cause that virtual keyboard is not displayed at all. Also affects to other GUI rendering...
Some CI menu handlers use polling threads that are not handled correctly in case of exceptions.
After some more channel changes CAM is not longer working reliable. Affected are DigitalEveryWhere and Twinhan polling threads.
Side issue: The CI handler gets not re-attached to a card after playback was stopped, so polling thread will...
Some CI menu handlers use polling threads that are not handled correctly in case of exceptions.
After some more channel changes...
Some CI menu handlers use polling threads that are not handled correctly in case of exceptions.
After some more channel changes...
in case of an unexpected card change the buffer is restartet from beginning.
http://mantis.team-mediaportal.com/view.php?id=2649
Open the issue in Mantis...
in case of an unexpected card change the buffer is restartet from beginning.
http://mantis.team-mediaportal.com/view.php?id=2649...
in case of an unexpected card change the buffer is restartet from beginning.
http://mantis.team-mediaportal.com/view.php?id=2649...
https://forum.team-mediaportal.com/mediaportal-1-1-0-beta-1-454/problems-dropping-frames-evr-74360/ [^]
The EVR presenter schedules late samples instead of dropping them. In addition it drops too many frames.
The following changes are currently proposed:
- schedule frames 1/3 of presentation time early instead of 1/4
- raise...
https://forum.team-mediaportal.com/mediaportal-1-1-0-beta-1-454/problems-dropping-frames-evr-74360/ [^]
The EVR presenter...
https://forum.team-mediaportal.com/mediaportal-1-1-0-beta-1-454/problems-dropping-frames-evr-74360/ [^]
The EVR presenter...
When powering down the HTPC with the aid of the remote control we somehow process an extra call to gplayer.stop which is not needed.
Instead it causes havoc when resuming the HTPC.
The gplayer.stop command is often first carried out when the HTPC actually resumes from standby.
Not exactly a nice thing.
Often it has no ill effects...
When powering down the HTPC with the aid of the remote control we somehow process an extra call to gplayer.stop which is not...
When powering down the HTPC with the aid of the remote control we somehow process an extra call to gplayer.stop which is not...
On my X10 remote control I usually have the power button mapped to "hibernation".
I decided to try the standby mode instead, seeing as this would improve turn on/off times.
It does :)
But then I also stumbled upon a timing issue that I haven't seen before when entering the slower hibernation mode.
Sometimes (30-40%) when I turn on...
On my X10 remote control I usually have the power button mapped to "hibernation".
I decided to try the standby mode instead...
On my X10 remote control I usually have the power button mapped to "hibernation".
I decided to try the standby mode instead...
TsReader NALU code has huge CPU usage (after discontinuity packet checking cde has been added). This causes frame dropping to happen.
http://mantis.team-mediaportal.com/view.php?id=2645
Open the issue in Mantis...
TsReader NALU code has huge CPU usage (after discontinuity packet checking cde has been added). This causes frame dropping to...
TsReader NALU code has huge CPU usage (after discontinuity packet checking cde has been added). This causes frame dropping to...
When you have the same channel in 2 groups and change channels it will always revert back to the first group the channel appears in.
http://mantis.team-mediaportal.com/view.php?id=2507
Open the issue in Mantis...
When you have the same channel in 2 groups and change channels it will always revert back to the first group the channel appears...
When you have the same channel in 2 groups and change channels it will always revert back to the first group the channel appears...
i have a lot of recordings with unicode in names. But i still use 1.0.2. SO if this plugin is compatible with 1.0.2 then please can anyone compile new mtn for me to test?
i have a lot of recordings with unicode in names. But i still use 1.0.2. SO if this plugin is compatible with 1.0.2 then please can...
Link to internal team forum:
https://forum.team-mediaportal.com/mediaportal-releases-315/mtn-exe-unicode-filenames-76159/ [^]...
null pointer randomly occurs when trying to refresh a recording from DB that has been deleted.
http://mantis.team-mediaportal.com/view.php?id=2644
Open the issue in Mantis...
null pointer randomly occurs when trying to refresh a recording from DB that has been deleted...
null pointer randomly occurs when trying to refresh a recording from DB that has been deleted...
During normal debugging I discovered a few places that threw a null pointer exception when accessing:
Channel.ReferringGroupMap().groupName
if some cases : "Channel.ReferringGroupMap()" could be null.
http://mantis.team-mediaportal.com/view.php?id=2643
Open the issue in Mantis...
During normal debugging I discovered a few places that threw a null pointer exception when accessing...
During normal debugging I discovered a few places that threw a null pointer exception when accessing...
When the MP-II server connects, "Local media" should be exchanged by "Music", "Movies" and "Pictures" menu entries. When it disconnects, the replacement is done the other way around.
Sometimes, not all entries were exchanged correctly. The menu then showed a random mixture of all those entries.
By SVN rev. 24763, I think that I have...
When the MP-II server connects, "Local media" should be exchanged by "Music", "Movies" and "Pictures" menu entries. When it...
When the MP-II server connects, "Local media" should be exchanged by "Music", "Movies" and "Pictures" menu entries. When it...