Specific prefix :
Show all
1.38
1.37
1.36
1.35
1.34
1.33
1.32
1.31.0
1.30.0
1.29.0
1.28.0
1.27.0
1.26.0
1.25.0
1.24.0
1.23.0
1.22.0
1.21.0
1.20.0
1.19.0
1.18.0
1.17.0
1.16.0
1.15.0
1.14.0
1.13.0
1.12.0
1.11.0
1.10.0
[Music]
[TV]
[Pictures]
[Configuration]
[Videos]
[DVD]
[Remote]
[VFD]
[EPG]
[Installation]
[Radio]
[Skin]
[Usability]
[other]
MediaPortal 1
MediaPortal 2
TV-Server
MPTagThat
Documentation
Installer
[solved]
From log:
2009-12-18 20:13:48.667409 [Info.][MPMain]: Main: Video memory left: -1799 MB
http://mantis.team-mediaportal.com/view.php?id=2588
Open the issue in Mantis...
From log:
2009-12-18 20:13:48.667409 [Info.][MPMain]: Main: Video memory left: -1799 MB...
From log:
2009-12-18 20:13:48.667409 [Info.][MPMain]: Main: Video memory left: -1799 MB...
Reported in the following thread:
https://forum.team-mediaportal.com/bugreports-74/recordings-namend-manuel-when-epg-importer-running-73721/ [^]
http://mantis.team-mediaportal.com/view.php?id=2587
Open the issue in Mantis...
Reported in the following thread...
Reported in the following thread...
Some combinations of cards/drivers can cause continuous unable to start graph messages when graph is allowed to stop. This can be seen from logs as PMT time out. This solution is not final fix but enables to use tv and allows to receive feedback from users.
Enable graph rebuilding by adding file to c: drive root:
c:\resetgraph.txt...
Some combinations of cards/drivers can cause continuous unable to start graph messages when graph is allowed to stop. This can be...
Some combinations of cards/drivers can cause continuous unable to start graph messages when graph is allowed to stop. This can be...
Using XPathDocument together with the XPathNavigator class run faster and use less memory than using the XmlDocument class. We should rework the XamlParser to be based on an XPathDocument.
http://mantis.team-mediaportal.com/view.php?id=2511
Open the issue in Mantis...
Using XPathDocument together with the XPathNavigator class run faster and use less memory than using the XmlDocument class. We...
Using XPathDocument together with the XPathNavigator class run faster and use less memory than using the XmlDocument class. We...
If you use the conditional expression !string.equals(...) in a skin, it does not evaluate correctly.
See this post: https://forum.team-mediaportal.com/general-development-no-feature-request-here-48/conditional-visibility-custom-condition-74819/#post548655 [^]
The same problem exists with string.contains() and string.starts()...
If you use the conditional expression !string.equals(...) in a skin, it does not evaluate correctly.
See this post...
If you use the conditional expression !string.equals(...) in a skin, it does not evaluate correctly.
See this post...
two different osd with "no media" occure while opening and after clip ends
http://mantis.team-mediaportal.com/view.php?id=2585
Open the issue in Mantis...
two different osd with "no media" occure while opening and after clip ends
http://mantis.team-mediaportal.com/view.php?id=2585...
two different osd with "no media" occure while opening and after clip ends
http://mantis.team-mediaportal.com/view.php?id=2585...
See thread
https://forum.team-mediaportal.com/mediaportal-1-1-0-beta-1-454/cpu-intensive-teletext-73896/ [^]
http://mantis.team-mediaportal.com/view.php?id=2584
Open the issue in Mantis...
See thread
https://forum.team-mediaportal.com/mediaportal-1-1-0-beta-1-454/cpu-intensive-teletext-73896/ [^]...
See thread
https://forum.team-mediaportal.com/mediaportal-1-1-0-beta-1-454/cpu-intensive-teletext-73896/ [^]...
Assignment of schedules to cards loops over all TV cards, which are not sorted by priority. This way a not preferred card can be used for recording.
http://mantis.team-mediaportal.com/view.php?id=2583
Open the issue in Mantis...
Assignment of schedules to cards loops over all TV cards, which are not sorted by priority. This way a not preferred card can be...
Assignment of schedules to cards loops over all TV cards, which are not sorted by priority. This way a not preferred card can be...
If an ip address is used as tv-server configuration, then singleseat/multiseat is not recognized properly.
http://mantis.team-mediaportal.com/view.php?id=2582
Open the issue in Mantis...
If an ip address is used as tv-server configuration, then singleseat/multiseat is not recognized properly...
If an ip address is used as tv-server configuration, then singleseat/multiseat is not recognized properly...
Enable those debug settings in MediaPortal Configuration instead of manual hacks.
http://mantis.team-mediaportal.com/view.php?id=2581
Open the issue in Mantis...
Enable those debug settings in MediaPortal Configuration instead of manual hacks...
Enable those debug settings in MediaPortal Configuration instead of manual hacks...
conflicts manager is currently only finished serverside.
the client has no access to the data created on the server, thats why the user will never see conflicts on the fontend.
the "workaround" for conflicts detection we have in the fontend right now, should then be replaced by the "ultimate solution" ;)...
conflicts manager is currently only finished serverside.
the client has no access to the data created on the server, thats why the...
conflicts manager is currently only finished serverside.
the client has no access to the data created on the server, thats why the...
If GPU drivers are hanging / crashing and Windows restarts the drivers MP wont currently survive from the situation. This used to work with 1.0.2 release.
http://mantis.team-mediaportal.com/view.php?id=2580
Open the issue in Mantis...
If GPU drivers are hanging / crashing and Windows restarts the drivers MP wont currently survive from the situation. This used to...
If GPU drivers are hanging / crashing and Windows restarts the drivers MP wont currently survive from the situation. This used to...
At least with Microsoft Windows 7 DTV DVD video decoder the zapping between SD and HD channels is failing if the graph is not going to be completely rebuild (only reconnect between filters is used).
http://mantis.team-mediaportal.com/view.php?id=2579
Open the issue in Mantis...
At least with Microsoft Windows 7 DTV DVD video decoder the zapping between SD and HD channels is failing if the graph is not going...
At least with Microsoft Windows 7 DTV DVD video decoder the zapping between SD and HD channels is failing if the graph is not going...
If you configure a share on a networked computer in either video or music, and this network share is not available, nor Medaportal neither Configuration can be startet. Hang occours at "loading display plugins". Logs don't show related entries.
http://mantis.team-mediaportal.com/view.php?id=2578
Open the issue in Mantis...
If you configure a share on a networked computer in either video or music, and this network share is not available, nor Medaportal...
If you configure a share on a networked computer in either video or music, and this network share is not available, nor Medaportal...
In multiseat, if you pause live TV for a while, then try to skip forward 15 sec, 30 sec, etc., then most of the time it just skips straight to the end.
Reported in team forum.
https://forum.team-mediaportal.com/mediaportal-releases-315/live-tv-recordings-freeze-stop-shortly-after-channel-change-skipping-multiseat-71308/index14.html...
In multiseat, if you pause live TV for a while, then try to skip forward 15 sec, 30 sec, etc., then most of the time it just skips...
In multiseat, if you pause live TV for a while, then try to skip forward 15 sec, 30 sec, etc., then most of the time it just skips...
The remoting calls that we do from the client to server will ofcourse timeout and fail in the event the server is down.
These blocking calls will timeout after approx 1 min. per call or so.
The client should have it's own lower timeout value.
http://mantis.team-mediaportal.com/view.php?id=2576
Open the issue in Mantis...
The remoting calls that we do from the client to server will ofcourse timeout and fail in the event the server is down.
These...
The remoting calls that we do from the client to server will ofcourse timeout and fail in the event the server is down.
These...
Remove MyExtension plugin, which not used and not have skin for B3W and will be replaced by a external plugin
http://mantis.team-mediaportal.com/view.php?id=2575
Open the issue in Mantis...
Remove MyExtension plugin, which not used and not have skin for B3W and will be replaced by a external plugin...
Remove MyExtension plugin, which not used and not have skin for B3W and will be replaced by a external plugin...
Currently, the shares configuration only provides a way to configure client shares. We need a switch in the shares overview to show/add/edit/delete also server shares. I think the config screens should look the same, there should only be a sort of tab-control to choose between the client's and the server's shares in the shares...
Currently, the shares configuration only provides a way to configure client shares. We need a switch in the shares overview to...
Currently, the shares configuration only provides a way to configure client shares. We need a switch in the shares overview to...
There were problems when resuming from suspend state in the follwing views:
tvguide
recordings
schedules
tvsearch
This should work better.
scenario:
"show last active module" is activated
user changes to tvguide
user suspends htpc-
user resumes htpc.
tvguide should resume as it was left...
There were problems when resuming from suspend state in the follwing views:
tvguide
recordings
schedules
tvsearch
This should...
There were problems when resuming from suspend state in the follwing views:
tvguide
recordings
schedules
tvsearch
This should...
Sometimes when the DB gets into an inconsistent state.
ex. where we have recordings that is associated with a channel that has been deleted.
in this "rec.ReferencedChannel()" returns null causing all sorts of error logging.
http://mantis.team-mediaportal.com/view.php?id=2571
Open the issue in Mantis...
Sometimes when the DB gets into an inconsistent state.
ex. where we have recordings that is associated with a channel that has been...
Sometimes when the DB gets into an inconsistent state.
ex. where we have recordings that is associated with a channel that has been...
The channel logo as well as recording EPG title is missing from the recorded TV OSD.
http://mantis.team-mediaportal.com/view.php?id=2572
Open the issue in Mantis...
The channel logo as well as recording EPG title is missing from the recorded TV OSD...
The channel logo as well as recording EPG title is missing from the recorded TV OSD...
In addition to VS 2008 SP1 C++ redist ATL security update must be installed. http://support.microsoft.com/kb/973924 [^]
http://mantis.team-mediaportal.com/view.php?id=2570
Open the issue in Mantis...
In addition to VS 2008 SP1 C++ redist ATL security update must be installed. http://support.microsoft.com/kb/973924 [^]...
In addition to VS 2008 SP1 C++ redist ATL security update must be installed. http://support.microsoft.com/kb/973924 [^]...
When using a thin network client where the SQL lite database files are located on a remote server the mediaportal.log and error.log log files are riddled with all sorts of SQL errors.
This happens when...
client suspends htpc.
client resumes htpc.
The db connections needs to be properly disposed/disconnected when located on remote...
When using a thin network client where the SQL lite database files are located on a remote server the mediaportal.log and error.log...
When using a thin network client where the SQL lite database files are located on a remote server the mediaportal.log and error.log...
consider this scenario.
user has activated the "show last active module" setting.
user starts fullscreen video playback of DVD/avi/mkv etc.
user hibernates htpc using remote control or similar.
user resumes .. result is black screen.
When last active window ID is fullscreen video it should instead use the previous windowID in order...
consider this scenario.
user has activated the "show last active module" setting.
user starts fullscreen video playback of...
consider this scenario.
user has activated the "show last active module" setting.
user starts fullscreen video playback of...
DaemonTools changed the exe name from "daemon.exe" to "DTLite.exe".
Configuration needs to be update to correctly detect the new program.
http://mantis.team-mediaportal.com/view.php?id=2567
Open the issue in Mantis...
DaemonTools changed the exe name from "daemon.exe" to "DTLite.exe".
Configuration needs to be update to correctly detect the new...
DaemonTools changed the exe name from "daemon.exe" to "DTLite.exe".
Configuration needs to be update to correctly detect the new...
If you had a earlier version of MediaPortal with Client only installed before installation of 1.1 Alpha, installation seems to fail. It doesn't report any errors on installation, but when configuration it's run & on close it trows an file not found error(see attached log).
A Clean install doesn't trow this...
If you had a earlier version of MediaPortal with Client only installed before installation of 1.1 Alpha, installation seems to...
If you had a earlier version of MediaPortal with Client only installed before installation of 1.1 Alpha, installation seems to...
The B3W OSD was updated. The B3 one now needs sorting.
Forum thread https://forum.team-mediaportal.com/mediaportal-releases-315/new-pause-osd-b3-non-wide-72581/ [^]
http://mantis.team-mediaportal.com/view.php?id=2566
Open the issue in Mantis...
The B3W OSD was updated. The B3 one now needs sorting.
Forum thread...
The B3W OSD was updated. The B3 one now needs sorting.
Forum thread...
for some cards "Microsoft DVBT network provider" works better than "Generic network provider".
For some others it's the only solution.
We need a way to select the provider for each TV card.
Community provided a preliminary patch...
for some cards "Microsoft DVBT network provider" works better than "Generic network provider".
For some others it's the only...
for some cards "Microsoft DVBT network provider" works better than "Generic network provider".
For some others it's the only...
when enabling the recording notification it would notify the user on old started and stopped recordings.
ex.
1) 10.00 hrs: client1 starts recording1 at 10.00 hrs.
2) 11:00 hrs: client2 decides to watch TV, when tv starts he gets a notification about recording1, which started at 10.00 hrs.
3) 11.00 hrs: client1 stops recording1 at...
when enabling the recording notification it would notify the user on old started and stopped recordings.
ex.
1) 10.00 hrs: client1...
when enabling the recording notification it would notify the user on old started and stopped recordings.
ex.
1) 10.00 hrs: client1...
The title says it all, for detailed info see here:
https://forum.team-mediaportal.com/bugreports-74/error-starting-radio-when-card-being-used-recording-tv-71820/ [^]
http://mantis.team-mediaportal.com/view.php?id=2514
Open the issue in Mantis...
The title says it all, for detailed info see here...
The title says it all, for detailed info see here...