- March 26, 2007
- 3,715
- 180
- Home Country
-
Germany
0002552: DiSEqC support is not working for TeVii cards (1 Viewer)
- Thread starter MediaPortal-Bot
- Start date
Users who are viewing this thread
Similar threads
Those signal numbers look fine. (y)
Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :(
-- from CyberSimian in the UK
Those signal numbers look fine. (y)
Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :(...
I've just rebuilt my htpc and added DVB-S and DVB-T cards TBS6281 and TBS6982. The system is all working well except for playback...
Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner card. A quad-tuner card would give you four tuners, but if you wanted more tuners you would need to use the TBS eight-tuner card, or use external tuners, either USB tuners (available with single or dual...
Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner...
I've been using MP2 now for about 3 years:
I really happy with the way it works, although I can think of many great features I'd...
Judging by the source code, 1.20 has DB version 61, and 1.33 has DB version 62. That is, one column has been added: symbolRateMultiplier
Judging by the source code, 1.20 has DB version 61, and 1.33 has DB version 62. That is, one column has been added...
Hi I have a TV server 1.12 on a dedicated box, utilizing 2 DVB-C cards and newcs. I want to keep that installation.
However one of...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal.
Maybe helpful for someone in the future. Thanks for the...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...
It should work, but the error is in something else, but it is not yet clear what.
It should work, but the error is in something else, but it is not yet clear what.
I have MP1 TV Server 1.30 installed on Windows Server 2012R2 (with some bits added for tuner support). MP Server versions have...