AtmoWin - improvement discussion (6 Viewers)

[HomeY]

Hab dir doch einen link zu einem Programm geschickt schon mal verwendet ?

Ja, und hier zeigt das Atmowin....

 

[BassFan]

Kleine Info..
Setze doch einfach hier mal ein paar Breakpoints und prüfe dann ob nach dem du TV>TSReader verwendet hast diese überhaupt ausgelößt werden.
Wenn nicht dann ist es normal das sich MP aufhängt da in dem Fall die Com Schnittstelle und AtmoLight nicht freigegeben werden.
Ich kann nur Ratschläge geben da ich keine Hardware noch über Win8 verfüge

gruss

 

[BassFan]

Hab dir doch einen link zu einem Programm geschickt schon mal verwendet ?

Ja, und hier zeigt das Atmowin....
View attachment 147150

Das ist ein Job .. der ausgelößt wird durch das AtmoLight Plugin..
Du mußt auf MP clicken und dann schauen was MP verwendet.

Nur Processe die direkt von MP verwendet werden sind maßgeblich.
Und NUR die haben irgendwelchen Einfluss auf die Geschehnisse innerhalb MP

gruss

 

[azzuro]

hi bassfan
i have issue with Atmolight & Atmowin.
If using Dynamic Refresh Rate on MePo.
with few vidéo, the refresh rate disconnet the Stream between Atmowin & MP.

step :
Active dynamic refresh rate. in MP config.
try to play this vidéo with MP & Atmolight/Atmowin active.
the refresh rate should try to change the resolution of your screen (try only ... )
LEds are started but don't show nothing of vidéo stream

 

[BassFan]

Active dynamic refresh rate. in MP config.

no found the entry you has a Picture?

greets

 

[azzuro]

http://wiki.team-mediaportal.com/1_...figuration/11_General/21_Dynamic_Refresh_Rate
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/Settings/1_General_Settings/5_Refresh_Rate_Settings

 

[BassFan]

http://wiki.team-mediaportal.com/1_...figuration/11_General/21_Dynamic_Refresh_Rate
http://wiki.team-mediaportal.com/1_...gs/1_General_Settings/5_Refresh_Rate_Settings

i have activate it..
Video Show good include ATmoWinA with liveView
Refreshrate changed to 50 hz,,

no Problem found.

Use 1.7 Final build

greets

 

[azzuro]

me too, but don't know why this vidéo don't work for me.
maybe my refresh rate setting.

  <entry name="force_refresh_rate">no</entry>
  <entry name="default_hz">60</entry>
  <entry name="default_hz_name">ATSCHD</entry>


<entry name="refreshrate01_name">CINEMA</entry>
    <entry name="CINEMA_fps">23.976</entry>
    <entry name="CINEMA_hz">23</entry>
    <entry name="refreshrate01_ext">
    </entry>
    <entry name="refreshrate02_name">CINEMA24</entry>
    <entry name="CINEMA24_fps">24</entry>
    <entry name="CINEMA24_hz">24</entry>
    <entry name="refreshrate02_ext">
    </entry>
    <entry name="refreshrate03_name">PAL</entry>
    <entry name="PAL_fps">25</entry>
    <entry name="PAL_hz">50</entry>
    <entry name="refreshrate03_ext">
    </entry>
    <entry name="refreshrate04_name">PALHD</entry>
    <entry name="PALHD_fps">50</entry>
    <entry name="PALHD_hz">50</entry>
    <entry name="refreshrate04_ext">
    </entry>
    <entry name="refreshrate05_name">NTSC</entry>
    <entry name="NTSC_fps">29.97</entry>
    <entry name="NTSC_hz">59</entry>
    <entry name="refreshrate05_ext">
    </entry>
    <entry name="refreshrate06_name">NTSCHD</entry>
    <entry name="NTSCHD_fps">59.94</entry>
    <entry name="NTSCHD_hz">59</entry>
    <entry name="refreshrate06_ext">
    </entry>
    <entry name="refreshrate07_name">ATSC</entry>
    <entry name="ATSC_fps">30</entry>
    <entry name="ATSC_hz">60</entry>
    <entry name="refreshrate07_ext">
    </entry>
    <entry name="refreshrate08_name">ATSCHD</entry>
    <entry name="ATSCHD_fps">60</entry>
    <entry name="ATSCHD_hz">60</entry>
    <entry name="refreshrate08_ext">
    </entry>
    <entry name="refreshrate09_name">TV</entry>
    <entry name="TV_fps">25</entry>
    <entry name="TV_hz">50</entry>
    <entry name="refreshrate09_ext">
    </entry>

 

[BassFan]

me too, but don't know why this vidéo don't work for me.
maybe my refresh rate setting.

i'm use the same config .. think is Default Settings..
and activate all checkboxes.
i'm not use LAV Filter for FLV

all work fine..

greets

 

[pur_berger]

Gentleman ... could you please provide the versions you want to use for testing in the first post - I'm following this thread now since start and I have meanwhile NO clue what combination should work.

Fact is that using the last ones provided in the Plugin Installer atmowin works - as it always did - but atmolight doesn't (connect?).

Markus