Avermedia Hybrid cardbus and mediaPortal (1 Viewer)

sflp

New Member
October 23, 2005
1
0
Denmark
Iv sent the filter monikers

I have the same problem. So I followed the link last night and sent all the information to: mailto:dman_lfc@hotmail.com

Now I am hoping fore some help. :lol:

And by the way the card is functioning very well as analogue - but not in MP. It will not start the software at all - just runs se start up sequence and disappears! Both when I am using the old and new versions of the MP software.

Any one knows what is wrong?
 

dman_lfc

Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    We don't support the software encoding of hybrid cards as it just leaves users dissapointed.
    If the generic software engine works then great if not then there is not alot we can do at this stage unless we get more TV developers.

    The DVB function should work just fine.
    If you're looking for a hybrid card which has analogue support then the Hauppauge HVR-1300 is the way to go due to its hardware encoding chip on the board.

    DMAN
     

    elkabyle

    Portal Member
    October 19, 2005
    22
    0
    dman_lfc said:
    We don't support the software encoding of hybrid cards as it just leaves users dissapointed.
    If the generic software engine works then great if not then there is not alot we can do at this stage unless we get more TV developers.

    The DVB function should work just fine.
    If you're looking for a hybrid card which has analogue support then the Hauppauge HVR-1300 is the way to go due to its hardware encoding chip on the board.

    DMAN

    So Dman you're saying that the digital tuner should work with mediaPortal, is that correct?
    That's all I need really, cos I can get all channels with freeview, which is digital, right?
    If you can confirm this I'll proceed with the purchase of the Avermedia card.
     

    elkabyle

    Portal Member
    October 19, 2005
    22
    0
    dman_lfc said:
    We don't support the software encoding of hybrid cards as it just leaves users dissapointed.
    If the generic software engine works then great if not then there is not alot we can do at this stage unless we get more TV developers.

    The DVB function should work just fine.
    If you're looking for a hybrid card which has analogue support then the Hauppauge HVR-1300 is the way to go due to its hardware encoding chip on the board.

    DMAN
    another precision Dman... Will I be able to record DVB programs (freeview channels) within mediaPortal?
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    Yes I just got confirmation the cardbus version works with DVB-T.
    So either grab CVS or use 0.1.3.0 and the updated file link from 15-October-2005 news release.

    DMAN
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    elkabyle said:
    dman_lfc said:
    We don't support the software encoding of hybrid cards as it just leaves users dissapointed.
    If the generic software engine works then great if not then there is not alot we can do at this stage unless we get more TV developers.

    The DVB function should work just fine.
    If you're looking for a hybrid card which has analogue support then the Hauppauge HVR-1300 is the way to go due to its hardware encoding chip on the board.

    DMAN
    another precision Dman... Will I be able to record DVB programs (freeview channels) within mediaPortal?

    Of course

    DMAN
     

    elkabyle

    Portal Member
    October 19, 2005
    22
    0
    dman_lfc said:
    elkabyle said:
    dman_lfc said:
    We don't support the software encoding of hybrid cards as it just leaves users dissapointed.
    If the generic software engine works then great if not then there is not alot we can do at this stage unless we get more TV developers.

    The DVB function should work just fine.
    If you're looking for a hybrid card which has analogue support then the Hauppauge HVR-1300 is the way to go due to its hardware encoding chip on the board.

    DMAN
    another precision Dman... Will I be able to record DVB programs (freeview channels) within mediaPortal?

    Of course

    DMAN

    Thx Dman,
    I have version 0.2 RC1 installed on my laptop. Do I need to revert to v. 0.3 or can I keep my installed version?
     

    Users who are viewing this thread

    Similar threads

    If anyone ever experiences the above, I found a fix. Removing and reinstalling MP-TVSeries fixed it. It must have gotten corrupted during the reinstall of MP. I also had to do the same with TRAKT which had some issues too that were not apparent at the time. All is well once again. :cool:
    If anyone ever experiences the above, I found a fix. Removing and reinstalling MP-TVSeries fixed it. It must have gotten corrupted...
    After much trial and error and comparing this computer with another that was working, I finally found out that Fanarthandler...
    Replies
    1
    Views
    888
    Good. I am pleased that that is now working for you. :) If you have ever looked at MP debug log files, you may have noticed that apparent errors are not rare, but these are "errors" that do not affect the functioning of the product. (It is not desirable to have these errors in the log file, as it misleads users, testers, and...
    Good. I am pleased that that is now working for you. :) If you have ever looked at MP debug log files, you may have noticed that...
    Hi, I am reinstalling MediaPortal 1.13 on a new W10 64Bit computer. In need to use this old version because of TVWishlist. So my...
    Replies
    10
    Views
    1K
    MP1 MP2 IPTV in New Zealand DE
    that will only work if the username+password is in the m3u8 url. I have one like that and it works pretty ok
    that will only work if the username+password is in the m3u8 url. I have one like that and it works pretty ok
    I would love to get IPTV working on my Mediaportal. I have the TV server and three clients working great, but a recent power supply...
    Replies
    8
    Views
    1K
    You can always try, select any window, turn off the Media Portal, change the ID of the selected one to the desired one (plugin) and check.
    You can always try, select any window, turn off the Media Portal, change the ID of the selected one to the desired one (plugin) and...
    I don't have a TV card in my HTPC setup, so I really only use plugins that browse and show media files, like MP TV-Series, Moving...
    Replies
    5
    Views
    515
    OK, I found a way to make it work. It seems like MP-TV-series Configuration (and Moving Pictures Configuration) starts as Administrator, and the Administrator do not have yet logged in on the UNC \\192.168.222.247\Public even if the normal user on the PC have done it. So to fix it on the Win 11 HTPC: Created a shortcut to...
    OK, I found a way to make it work. It seems like MP-TV-series Configuration (and Moving Pictures Configuration) starts as...
    Hi! I was running MP1.33 x64 and I was fine and happy since many years, then the hard drive on the HTPC died. But I was able to...
    Replies
    1
    Views
    354
    Top Bottom