- September 1, 2008
- 21,577
- 8,224
- Home Country
- New Zealand
Are you using the "New Zealand - Satellite Freeview" profile? If so then I suspect the only thing wrong will be the LNB parameters. Try [10750000, 10750000, 12750000] or [11300000, 11300000, 12750000].the geekzone epg collector
Yep, there is now/next info in EIT format and a full 8 day guide in MHEG 5 format on DVB-T... but unfortunately MHEG 5 is not supported in MP yet. Satellite has a full 8 day guide in EIT format, so if you enable the timeshifting and/or idle EPG grabber for the Freeview channels then EPG should be picked up.With the T card I used to get about an hours worth of epg from that.
Specific instructions:
1. Go to the DVB EPG section in TV Server configuration, and enable either or both the timeshifting and idle EPG grabber. Default timeouts should be fine.
2. In the TV Epg grabber sub section, select all the Freeview channels.
As I said above, I suspect LNB parameters may be part of the problem, but remember the tuner can't be used in 2 applications at the same time. If you're using 1.2.0b and pause mode is enabled then the EPG Grabber won't be able to use the tuner.So I have gone back to the EPG collector to try the S card but no succes - keep getting 'no tuner able to tune to xxxxx frequency. I am getting tv though so somethings working.
mm