[no Bug] Channel not available / No PMT found (2 Viewers)

[mm1352000]

Fragga

Where are your logs? We cannot confirm that you have the same problem as DerPat without them. Please disable MDAPI and post logs showing the problem for free to air channels.

 

[Fragga]

AW: Channel not available / No PMT found

Okay I disabled MDAPI (unchecked CAM in TV-Card configuration - not sure if its enough to disable MDAPI)
But the error is not gone. I uploaded Logs where i tried to view a freetoair Channel with the TV-Server Preview function.
for help!

 

[Fragga]

AW: Channel not available / No PMT found

Its really weird some CHannels work some not

As example the channel "DasErsteHD" is working "but anouther channel from same Provider is not!

 

[jameson_uk]

Its really weird some CHannels work some not

As example the channel "DasErsteHD" is working "but anouther channel from same Provider is not!

The obvious difference is that the non working channel does not have modulation, pilot or roll off set. Might be worth trying this. If that works a full rescan might resolve your issues

 

[mm1352000]

jameson_uk
Usually those parameters are only set for DVB-S2 channels. Tuner drivers are smart enough to figure out what they should be, and in fact we use ModQpsk (which is the standard DVB-S modulation) to differentiate between DVB-S2 and DVB-S (ie. when modulation is ModQpsk it is considered DVB-S2). Don't ask me why we do that! Legacy code that just works...

Fragga
I'll take a look at your logs as soon as I can. Got to go to work.

 

[KillRoY]

Hello!
Got the same problem as DerPat, hop the logs will be helpful.

 

[jameson_uk]

Hello!
Got the same problem as DerPat, hop the logs will be helpful.

Your issue looks different. Your setup seems to be working and then then you attempt to tune to SVT2 you get

2011-05-03 23:10:25.176400 [(18)]: dvb:  LockedInOnSignal could not lock onto channel - no signal or bad signal

This looks like you need to check that the right channels are mapped to right cards and that they do have the correct signal (you may also need to rescan if channels have moved)

 

[jameson_uk]

[Edit: I didn't set the thread to "no bug". It is not my place to change it. I advise you to check your "pause graph" setting as suggested by jameson_uk before jumping into the code. Could be a simple configuration problem...]

DerPat have you actually tried this?

 

[Seidelin]

[Edit: I didn't set the thread to "no bug". It is not my place to change it.]

If there is a bug, sure you can change the thread status. I set the thread status to my best guess. Confirmed bugs should have thread marked as bug, and created mantis entry. This can (should!) be done by any team member. I surely won't be offended by someone changing the thread status and entering a confirmed bug into mantis.

 

[chrissnow]

I'm not sure if it's a similar problem that I had recently.

I fixed it by uninstalling MDAPI(not just turning the CAM tick box off) deleting all the channels then rescanning for channels.